TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TT</strong>-<strong>3000E</strong> <strong>mini</strong>-C <strong>GMDSS</strong> <strong>User</strong> <strong>Manual</strong><br />
5. Press Enter to move highlight to '< OK >', and<br />
press Enter once more.<br />
5.7.6 CONFIGURING THE PRINTER<br />
1. Press F10 to access the System window.<br />
2. Choose Options, Printer (O, P) to get the Printer<br />
window presented.<br />
In the Printer window, you can control the following<br />
parameters.<br />
Important: The <strong>TT</strong><strong>3000E</strong> <strong>GMDSS</strong> system only supports the <strong>TT</strong>-<br />
3608A printer and therefore these parameters are not<br />
configurable when using this system.<br />
Full page always If set On, a full page is always printed no<br />
matter how short the message may be. If<br />
you are using a l<strong>as</strong>er-printer you must set<br />
this On. Default is Off. In the Off position,<br />
a line '----' is printed between each<br />
printout.<br />
Use Formfeed If set On, a Formfeed character will be sent<br />
to the printer after every page printed. If<br />
you are using a l<strong>as</strong>er-printer you must set<br />
this On. Default is Off.<br />
Compressed If set On, the characters are printed in<br />
compressed form allowing up to 132<br />
characters per line. Only relevant for PC's<br />
having a local printer connected. Default is<br />
Off.<br />
Header/Footer If set On, a header and a footer is printed<br />
on every page. Only relevant for PC's<br />
having a local printer connected. Default is<br />
On.<br />
117