TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TT</strong>-<strong>3000E</strong> <strong>mini</strong>-C <strong>GMDSS</strong> <strong>User</strong> <strong>Manual</strong><br />
5.7.5 USING COM2<br />
Figure 37 Configuring the Serial Port<br />
Normally you should not change this set-up, unless you<br />
want to use another port instead of Com1. To restore<br />
the default set-up move the highlight to '< Default >'<br />
and press Enter. Press Enter once more on '< OK >' to<br />
actually load the values.<br />
1. Press F10 to access the System window.<br />
2. Choose Options, Serial ports (O, S) to get the<br />
Serial port window presented.<br />
3. Move the highlight to the Com2-field by<br />
pressing Arrow-Right and Arrow-Down.<br />
4. Press Spacebar to get '(•) Com2'.<br />
116