TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TT</strong>-<strong>3000E</strong> <strong>mini</strong>-C <strong>GMDSS</strong> <strong>User</strong> <strong>Manual</strong><br />
below a certain level the night setup is used (red characters<br />
on black background).<br />
The brightness control can be configured to manual or<br />
automatic. If the automatic brightness control is turned on<br />
the brightness level is b<strong>as</strong>ed on the light level around the<br />
terminal. The user can still change the brightness level, but<br />
the automatic control will begin to adjust the brightness<br />
level again after 2 minutes. If the automatic brightness<br />
control is turned off, the chosen brightness level is never<br />
changed.<br />
The brightness level can also be changed manually via the<br />
keyboard by pressing to incre<strong>as</strong>e the level or<br />
to decre<strong>as</strong>e the level.<br />
5.7.4 CONFIGURING THE SERIAL PORT<br />
1. Press F10 to access the System window.<br />
2. Choose Options, Serial ports (O, S) to get the<br />
Serial port window presented.<br />
Ple<strong>as</strong>e notice that it is not possible the select other than<br />
, while the transceiver is connected (Power ON).<br />
Therefore turn OFF the transceiver and wait for “Transceiver<br />
not connected!” to be displayed in the Status Field.<br />
115