TT-3000E mini-C GMDSS User Manual - Polaris-as.dk

TT-3000E mini-C GMDSS User Manual
43/50 lines You can get 43 lines on the screen with an EGA
adapter and 50 lines with an VGA. Default is 25
lines.
Beep You may set beep off. This applies only to invalid
keystrokes. Default is On.
Screen save This facility shows a blank screen after a period of
inactivity. On the blank screen the current ocean
region, signal strength and time will be shown at
different positions, e.g.:
East Atlantic ����� 12:15
Pressing a key on the keyboard will show the
windows on the screen again. This is also the case,
if a new window is displayed by the program.
Screen save may be disabled. Default is Off.
Visibility Controls the presentation of all the major parts of
the program. Each part, called an Application, may
be set to be shown at all times indicated by a '[X]'
or only to be shown when you're actually using
this part. Default is that Capsat and the Address
Book are shown at all times. Directory and System
are only shown, when you're actually using them.
The following is only available on the TT-3606E Message Terminal.
Brightness You can adjust the display- and softkey-backlight
through the brightness level, which goes from 0
(no light) to 100 (maximum light).
The brightness level is not just the level of the display- and
softkey-backlight, but also of the color setup of the display.
Above a certain brightness level the program uses the
colors chosen by you (b&w, standard or customized) and
114