TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
TT-3000E mini-C GMDSS User Manual - Polaris-as.dk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TT</strong>-<strong>3000E</strong> <strong>mini</strong>-C <strong>GMDSS</strong> <strong>User</strong> <strong>Manual</strong><br />
Always leave the Terminal Mode (Press Esc) when you're<br />
done to ensure the functionality of your system.<br />
The Terminal Mode is available for users wanting to<br />
customise their system to a degree not available from the<br />
windows of the Message Handling software.<br />
In Terminal Mode you are in direct contact with the<br />
transceiver and you are able to issue commands by typing<br />
them from the keyboard.<br />
5.5.46 MESSAGE LOG<br />
1. Choose Options, Configuration, Terminal mode<br />
(Alt, O, C, T) and wait for the blinking cursor<br />
to appear. This may take a while if the<br />
transceiver and the Message Handling<br />
program is communicating.<br />
2. Press Enter to see the prompt ' :' on the<br />
screen.<br />
3. Type 'HELP' and Enter to get a list of the<br />
available commands.<br />
4. Type in a command followed by ' ?' and press<br />
Enter to get detailed information.<br />
All in- and outgoing messages are recorded in special log<br />
files on disk. Each log file may hold <strong>as</strong> many <strong>as</strong> 50<br />
messages. The name of the log files have a special layout<br />
such <strong>as</strong>:<br />
LOG09-97.001 LOG10-97.001 LOG10-97.002<br />
where 09 and 10 is September and October respectively. 97<br />
is the year. 001 and 002 is a sequential number within each<br />
month. A new log file is generated when a new month<br />
begins or when the size of the file gets larger than 100 Kb.<br />
100