coaxial test probes - Phoenix Mecano Kft.
coaxial test probes - Phoenix Mecano Kft. coaxial test probes - Phoenix Mecano Kft.
TEST PROBES
- Page 2 and 3: INNOVATIVE PRODUCTS. SWITCHING TEST
- Page 4 and 5: Content CONTENT Innovative PTR Prod
- Page 6 and 7: Fig. 1 Test Probes Design of Test P
- Page 8 and 9: Types of Receptacles Fig. 3 Springs
- Page 10 and 11: Head Styles Form A 90° taper bore
- Page 12 and 13: Lateral play/pinpointing (test poin
- Page 14 and 15: Detecting bent pins For detecting b
- Page 16 and 17: SERIES 1002 Available Headstyles He
- Page 18 and 19: SERIES 1005 Available Headstyles He
- Page 20 and 21: SERIES 1007 Available Headstyles He
- Page 22 and 23: SERIES 1007.60 Available Headstyles
- Page 24 and 25: SERIES 1008/E Available Headstyles
- Page 26 and 27: SERIES 1010.50 Available Headstyles
- Page 28 and 29: SERIES 1012 • 1012/Z Available He
- Page 30 and 31: SERIES 1013/Z Available Headstyles
- Page 32 and 33: SERIES 1015.50 Available Headstyles
- Page 34 and 35: SERIES 1025/E Available Headstyles
- Page 36 and 37: SERIES 1025 • 1025/Z Available He
- Page 38 and 39: SERIES 1064 Available Headstyles He
- Page 40 and 41: SERIES 2024 • 1024 Available Head
- Page 42 and 43: SERIES 2029 Available Headstyles He
- Page 44 and 45: SERIES 5257/G Available Headstyles
- Page 46 and 47: SERIES 1040 Available Headstyles He
- Page 48 and 49: SERIES 1050 • 1060 Available Head
- Page 50 and 51: SERIES 1054 Available Headstyles He
TEST<br />
PROBES
INNOVATIVE<br />
PRODUCTS.<br />
SWITCHING<br />
TEST PROBES<br />
Page 62<br />
PTRPTR offers a wide range of <strong>test</strong> <strong>probes</strong>. Switching <strong>test</strong><br />
PNEUMATIC<br />
TEST PROBES<br />
Page 80<br />
COAXIAL<br />
TEST PROBES<br />
Page 86<br />
<strong>probes</strong> and screwing <strong>test</strong> <strong>probes</strong> with thread for the<br />
cable <strong>test</strong>, <strong>test</strong> <strong>probes</strong> for PCB <strong>test</strong> (ICT and FT), battery<br />
contacts and interface pins, high current <strong>test</strong> <strong>probes</strong> for<br />
run in or burn in <strong>test</strong>, pneumatic <strong>test</strong> <strong>probes</strong> for func-<br />
tional <strong>test</strong>. For every application we will find the suitable<br />
solution, that’s what we are strong for.<br />
BATTERY<br />
TEST PROBES<br />
Page 84<br />
HIGH CURRENT<br />
TEST PROBES<br />
Page 77
FK 5151<br />
BATTERY<br />
Another application for <strong>test</strong><br />
<strong>probes</strong> is the field of battery<br />
contacts. Because of its good electrical performance and<br />
high durability it is a very effective alternative to solutions<br />
with spring bended parts. Battery <strong>probes</strong> are used for<br />
mobile devices or interfaces in telecommunication,<br />
medicine technique, aircraft and aerospace<br />
industry, and automotive industry as<br />
well. Simply everywhere, were<br />
charging current or signals have<br />
to be transmitted. Depart from<br />
the standard range PTR offers<br />
special designed solutions, exactely<br />
adjusted to customers requirements, complete interfaces<br />
or connectors included.<br />
CONTACTS<br />
AUTOMOTIVE INDUSTRY<br />
FK 5110<br />
COMPUTER<br />
3<br />
FK 5099<br />
MEDICINE TECHNIQUE<br />
Special applications<br />
for customer requirements<br />
DEFENCE TECHNOLOGY<br />
AEROSPACE<br />
TELECOMMUNICATION
Content<br />
CONTENT<br />
Innovative PTR Products / Battery Contacts 2-3<br />
Content 4-5<br />
Technical information about <strong>test</strong> <strong>probes</strong>... 6-11<br />
Headstyle selection 10<br />
Applications 12-14<br />
Pneumatic accessories 89<br />
Tools 92-94<br />
The representations 98-99<br />
Product Range<br />
Test Probes for Centers < 50 MIL / 1.27 mm<br />
Series Centers Extension HeightWorking Travel Max. Travel Page<br />
mm / inches mm / inches mm / inches<br />
1001 30 MIL/0.76 mm 5.50/.217 1.35/.053 2.00/.079 15<br />
1002 40 MIL/1.02 mm 5.30/.209 1.35/.053 2.00/.079 16<br />
1003 40 MIL/1.02 mm 5.30/.146 1.00/.039 1.30/.051 17<br />
1005 40 MIL/1.02 mm 10.5/ .413 3.00 /.118 3.80/.149 18<br />
1006 40 MIL/1.02 mm 16.76/.660 1.27/.500 2.29/.090 19<br />
1007 50 MIL/1.27 mm 6.70/.264 2.40/.095 2.80/.110 20<br />
1007.50 50 MIL/1.27 mm 17.00/ 1.35/.053 2.00/.079 21<br />
1007.60 50 MIL/1.27 mm 6.05/.238 2.54/.100 2.54/.100 22<br />
1007.70 50 MIL/1.27 mm 6.00/.236 1.27/.050 1.27/.050 23<br />
1008/E 50 MIL/1.27 mm 16.0/.630 4.30/.169 6.40/.252 24<br />
Test Probes for Centers 75 MIL / 1.91 mm<br />
1010 75 MIL/1.91 mm 8.30/.327 2.40/0.95 3.00/.118 25<br />
1010.50 75 MIL/1.91 mm 6.54/.258 2.54/1.00 2.54/1.00 26<br />
1011 75 MIL/1.91 mm 8.20/.323 4.40/.165 4.40/.165 27<br />
1012 • 1012/Z 75 MIL/1.91 mm 15.6/.614 5.00/.197 6.30/.248 28<br />
1012/E 75 MIL/1.91 mm 16.00/.630 4.30/.169 6.40/.252 29<br />
1013/Z 75 MIL/1.91 mm 21.20/.835 12.00/.472 9.60/.378 30<br />
Test Probes for Centers 100 MIL / 2.54 mm<br />
1015 100 MIL/2.54 mm 12.80/.504 3.50/.138 4.40/.173 31<br />
1015.50 100 MIL/2.54 mm 8.70/.342 4.20/.165 4.20/.165 32<br />
1016 • 1018 100 MIL/2.54 mm 12.80/.504 3.50/.138 4.40/.173 33<br />
1025/E 100 MIL/2.54 mm 16.30/.642 4.30/.169 6.40/.252 34-35<br />
1025 • 1025/Z 100 MIL/2.54 mm 15.90/.626 5.00/.197 6.30/.248 36<br />
1034 • 1036 100 MIL/2.54 mm 19.50/.768 8.00/.315 10.00/.394 37<br />
1064 100 MIL/2.54 mm 8.11/.083 1.27/.050 1.27/.050 38<br />
2021 • 1021 100 MIL/2.54 mm 10.50/.413 4.00/.157 5.30/.209 39<br />
2024 • 1024 100 MIL/2.54 mm 16.20/.638 8.00/.315 10.00/.394 40<br />
2028 • 1028 100 MIL/2.54 mm 10.50/.413 4.00/.157 5.30/.209 41<br />
2029 100 MIL/2.54 mm 16.20/.638 6.40/.252 8.00/.315 42<br />
Flying Probe<br />
5248/G 100 MIL/2.54 mm 19.60/.665 6.40/.252 8.00/.315 43<br />
5257/G 100 MIL/2.54 mm 14.60/.576 4.00/.157 5.30/.209 44<br />
Test Probes for Centers > 100 MIL / 2.54 mm<br />
1030 3.00 mm 16.30/.642 5.00/.197 6.30/.248 45<br />
1040 4.00 mm 19.60/.665 4.40/.173 5.50/.217 46<br />
1042 4.50 mm 13.30/.524 5.60/.221 7.00/.276 47<br />
1050 • 1060 4.00 mm 10.70/.421 4.40/.173 5.50/.217 48<br />
1051 • 1061 4.00 mm 10.20/.638 5.60/.221 7.00/.276 49<br />
1054 4.50 mm 17.00/.669 5.10/.201 6.40/.252 50<br />
4<br />
Page
Test Probes with Thread<br />
Series Centers Extension Height Working Travel Max. Travel Page<br />
mm / inches mm / inches mm / inches<br />
1010/G 1.50 mm 8.30/.327 2.40/.095 3.00/.118 51<br />
1015/G 2.54 mm 12.80/.504 3.50/.138 4.40/.173 52<br />
1015/G Position Test 2.54 mm 3.50/.138 4.40/.173 53<br />
1021/G 2.54 mm 10.50/.413 4.00/.157 5.30/.209 54<br />
1021/G Position Test 2.54 mm 4.00/.157 5.30/.209 55<br />
1028/G 2.54 mm 10.50/.413 4.00/.157 5.30/.209 56<br />
1042/G 4.50 mm 13.30/.524 5.60/.221 7.00/.276 47<br />
1060/G 4.00 mm 10.70/.421 4.40/.173 5.50/.216 57<br />
1060/G Position Test 4.00 mm 4.40/.173 5.50/.216 58<br />
1061/G 4.00 mm 16.20/.638 5.60/.221 7.00/.276 59<br />
5110/G 4.00 mm 7.30/.287 2.80/.110 3.50/.138 60<br />
Non Rotating Test Probes<br />
1021/GV-Y4 2.54 mm 10.50/.413 4.00/.157 4.30/.169 61<br />
2053 2.54 mm 18.20/.717 4.00/.157 5.00/.197 62<br />
1053 5.00 mm 16.20/.638 4.00/.157 5.00/.197 63<br />
1053/G 4.00 mm 4.00 64<br />
Switching Test Probes - with and without thread<br />
3010/2(G) • 3010/10(G) 4.00 mm 10.20/.402 4.00/.157 5.00/.197 65<br />
3010/2GW(5) 4.00 mm 10.20/.402 4.00/.157 5.00/.197 66<br />
3010/2F 4.00 mm 10.20/.402 4.00/.157 5.00/.197 67<br />
3010/2V 4.00 mm 10.20/.402 4.00/.157 5.00/.197 68<br />
3011/2GS 4.00 mm 10.20/.402 4.00/.157 5.00/.197 69<br />
3012/2GS 4.00 mm 10.20/.402 4.00/.157 4.20/.165 70<br />
3012/2GS-FS1 4.00 mm 10.20/.402 4.00/.157 4.20/.165 71<br />
3014/2G 4.00 mm 9.20/.362 4.00/.157 5.00/.197 72<br />
3020 • 3020/2G 2.54 mm 9.50/.374 4.00/.157 5.30/.209 73<br />
3023/2GS 2.54 mm 10.40/.410 4.00/.157 5.00/.197 74<br />
3024/2G 2.54 mm 9.20/.362 4.00/.157 5.00/.197 75<br />
3020/2GW5 2.54 mm 9.50/.374 4.00/.157 5.30/.209 76<br />
3030 2.54 mm 16.40/.646 5.00/.197 6.30/.248 78<br />
3035 1.91 mm 9.30/.367 4.00/.157 5.00/.197 79<br />
Push Back Test Probes<br />
3028.01 2.54 mm 17.80/.700 4.00/.157 5.00/.197 77<br />
5087 4.00 mm 23.50/.925 9.50/.374 10.00/.394 80<br />
5104 4.00 mm 34.90/1.374 5.00/.197 7.00/.276 81<br />
5203 2.54 mm 40.50/1.608 5.00/.197 5.50/.216 82<br />
High Current Test Probes - with and without thread<br />
1021 • 1021/G 2.54 mm 10.50/.413 4.00/.157 5.30/.209 83<br />
1060 • 1060/G 4.00 mm 10.70/.421 4.40/.173 5.50/.216 84<br />
1075 • 1075/G 5.00 mm 10.80/.425 4.40/.173 5.50/.216 85<br />
Pneumatic Test Probes<br />
4004/G 4.00 mm 8.50/.338 6.00/.236 10.00/.394 86<br />
4004 • 4005 • 4006 4.00 mm 5.50/.217 8.00/.315 10.00/.394 87<br />
4034 2.54 mm 10.50/.413 4.00/.157 5.30/.209 88<br />
Pneumatik-Zubehör 89<br />
Battery Test Probes<br />
5082 6,50 mm 7,00/.276 3.20/.126 4.00/.157 90<br />
5099 • 5099.04 3.00 mm 5.50/.217 3.30/.130 4.00/.157 91<br />
5110/S • 5110/S.02 • 5110/0.03 4.00 mm 7.20/.283 2.80/.110 3.50/.138 92<br />
Coaxial-Test Probes<br />
5207 • 5207G 4.00 mm 7.20/.283 2.80/.110 3.50/.138 93<br />
Tools 94-96<br />
The representations 98-99<br />
5
Fig. 1<br />
Test Probes<br />
Design of<br />
Test Probes<br />
Spring contact <strong>probes</strong><br />
single<br />
are used for electrical <strong>test</strong>ing of printed boards,<br />
printed-board assemblies and components as well as<br />
wiring fields in the corresponding <strong>test</strong> adapters.<br />
Where <strong>test</strong> <strong>probes</strong> are used in special <strong>test</strong> modules<br />
dual<br />
they can also be applied for the <strong>test</strong>ing of connector cable<br />
systems.<br />
Purpose/Design/Materials<br />
The typical design of the different functional principles of<br />
PTR <strong>test</strong> <strong>probes</strong> is illustrated in Fig. 1.<br />
Barrels<br />
are either drawn from bronze or nickel silver, or are<br />
turned from brass. They are gold plated to improve<br />
their electrical and anti-corrosion characteristics.<br />
6<br />
Plunger Guide<br />
turning secured high current<br />
Plungers<br />
hollow<br />
plunger<br />
are made of hardened steel for maximum useful life.<br />
The significant feature here is a versatile range of<br />
effective probe heads, such as pointed tips.<br />
The plunger material is copper beryllium (CuBe) for<br />
the highest specification with regard to electrical<br />
conductivity over a long product life. Spring contact<br />
<strong>probes</strong> with copper beryllium plungers are ideal for<br />
measuring applications, both where there is low<br />
potential difference and in peak current <strong>test</strong>ing.<br />
Plungers are alternatively enhanced with various<br />
layers of precious metal to meet additional anti-corrosion<br />
and abrasion requirements and give extra electrical<br />
conductivity and contact properties:
Hard gold<br />
has surface passivity, making it ideal for electrical<br />
contacts with hig chemical durability. With a hardness of<br />
up to 200 HV there are limits to its abrasion-resistance<br />
properties. Under favourable conditions, where radial<br />
movement is avoided, for example, its resistance to<br />
abrasion can be positively influenced. Volume resistance<br />
can then be regarded as constant.<br />
Rhodium<br />
is one of the so-called platinum metals. Because of its<br />
extreme hardness, measuring up to 1000 HV, it is highly<br />
resistant to wear and tear. However, the trapped oxygen<br />
makes the individual layers rather more brittle.<br />
This factors is countered by reducing layer thickness,<br />
although any damage to thin and brittle rhodium layers<br />
can lead to a deterioration of their intrinsically good<br />
electrical contact properties.<br />
Nickel<br />
a distinction must be made here between electroplating<br />
and chemical plating (plating without current).<br />
Electroplated Nickel<br />
is characterised by extreme purity and a shiny metallic sur-<br />
face. However, there are limits to its application because<br />
of its inadequate adherence to contour and<br />
the brittleness of its layers caused by oxygen. These are<br />
typical features of electrolytic plating.<br />
Chemical nickel<br />
trueness to contour and excellent adhesion to the<br />
underlying shape together with good chemical resistance<br />
are the distinctive features of chNI. Its hardness can be<br />
influenced in certain areas and can amount to 700 HV. The<br />
contour-true plating means that even the problematic<br />
7<br />
sharp tips of the probe heads, with their high degree<br />
of penetration, can be upgraded. Because of their<br />
phosphorous content the electrical properties are less<br />
favourable than in the case of gold or rhodium. With<br />
regard to surface hardness chNi lies between Au and Rh.<br />
The fact that layers are thicker means that is has better<br />
abrasion resistance than rhodium. Considerably better<br />
surface quality is achieved by chemical plating than by<br />
electroplating, with the immersion which this requires.<br />
Pneumatic<br />
<strong>test</strong> probe
Types of Receptacles<br />
Fig. 3<br />
Springs<br />
are manufactured from high-quality spring steel wire,<br />
with gold or silver being used for the surface. The<br />
operating temperature range of -30 °C to +120 °C also<br />
determines the operating temperature range of the<br />
whole spring contact. The rated spring power of the<br />
spring contact probe is in relation to the working travel<br />
(4/5 of the max. travel).<br />
Receptacles<br />
are inserted permanently into the respective probe<br />
location boards, so that worn-out spring contact <strong>probes</strong><br />
can be replaced without any wiring work. Various<br />
receptacle types are available for wiring in the adapter<br />
(fig. 1). Bronze, nickel silver or brass are used as basic<br />
materials. Receptacles are gold plated to improve their<br />
electrical properties and protect them against corrosion.<br />
8<br />
crimp termination<br />
solder cup<br />
Assembly holes<br />
wire - wrap post<br />
round pin<br />
pre-wired<br />
press ring up<br />
to the limit<br />
press ring variable<br />
chamfered open end<br />
with side-drilled hole<br />
to ensure that the receptacles are fitted correctly in the<br />
probe location boards the assembly holes must be drilled<br />
with the grea<strong>test</strong> precision. The drill bit diameters speci-<br />
fied on the data sheet reflect our own experience and are<br />
based on the following pre-conditions:<br />
Use of hard-metal bits<br />
Drill speed of 26.000 - 35.000 rpm<br />
Rate of advance of 0,6 - 0,8 m/min.<br />
Material as specified on the data sheet<br />
Thickness of probe location board 10,0 mm<br />
Drilling with automatic removal of shavings<br />
Where these pre-conditions are not adhered to, different<br />
diameters could result. We recommend trial drilling.<br />
threaded receptacle<br />
with solder cup<br />
(partial section)
Quality and Service Life<br />
during electrical <strong>test</strong>ing, <strong>test</strong> <strong>probes</strong> are subjected to<br />
extreme demands with regard to performance and<br />
service life. With PTR <strong>test</strong> <strong>probes</strong> every phase of the<br />
production process, from the development to the<br />
delivery stage, is subjected to the most stringent controls.<br />
Quality assurance in accordance with EN 29001/DIN ISO<br />
9001 guarantees the highest manufacturing standards.<br />
Spring contact <strong>probes</strong> are subjected to loadchange <strong>test</strong>s<br />
for purposes of optimizing materials, design parameters<br />
and manufacturing processes. Performance and service<br />
life are subject to continuous monitoring in our reliability<br />
<strong>test</strong>ing facilities.<br />
Our laboratory <strong>test</strong>s indicate that depending on dimen-<br />
sions and<br />
application, PTR <strong>test</strong> <strong>probes</strong> have a<br />
service life of between 100.000 and<br />
1 million load changes.<br />
As a rule the service life of a spring<br />
contact depends on the following<br />
factors:<br />
Spring power in relation to spring<br />
diameter<br />
Correct axial load, avoidance of lateral stress<br />
Observance of the recommended working travel<br />
Correct insertion of the spring contact in the<br />
receptacle<br />
The extent of negative ambient influences such<br />
as dirt, humidity, aggressive materials and<br />
temperature extemes.<br />
Contact-making in current/-voltage-free state<br />
current load<br />
9<br />
Of course real durability also depends on the respective<br />
demands of the user, involving for example the limits on<br />
volume resistance, the level of dirt and the operational<br />
characteristics involved.
Head Styles<br />
Form A<br />
90° taper bore<br />
For plug pins, wire-wrap pins and straight/curved connections.<br />
Applied with cleaned printed boards because of dirt risk.<br />
Form B<br />
30° pointed tip<br />
For strip conductors, throughplating, soldering points and <strong>test</strong> pads.<br />
Form BS<br />
flexible needle<br />
Applications as for BST.<br />
Form BST<br />
steel needle<br />
A sharp steel needle with a long implement life for reliable penetration<br />
of flux and dirt on uncleaned printed boards or component<br />
groups and for SMD contacts.<br />
Form C<br />
waffle<br />
A universal head for straight or curved component leads, wire-wrap<br />
posts and connector pins.<br />
Form D<br />
round head<br />
For successful <strong>test</strong>ing of strip conductors and mechanical connections,<br />
screws etc. with no risk of damage.<br />
Form EB<br />
steel tip insert<br />
As for B, but with additional penetration for uncleaned printed<br />
circuit boards.<br />
Form F<br />
flat head<br />
Especially suited to convex, clean contact points, to avoid surface<br />
damage.<br />
10
Form G<br />
four-point crown<br />
For component leads, soldering points and <strong>test</strong> pads where there is<br />
no excessive dirt.<br />
Form H<br />
triangular head<br />
Throughplating contacts are no problem here, even with flux<br />
residues.<br />
Form K<br />
hexagonal head<br />
As for H, but with added contact penetration.<br />
Form M<br />
crown with central tip<br />
The combination of crown and central tip ensures contact reliability<br />
at almost all <strong>test</strong> points.<br />
Form Q<br />
self-cleaning head<br />
Applications as for G, but the undercut shape means that dirt is<br />
guided outwards.<br />
Form Q5<br />
three-point crown, self-cleaning<br />
Application as for Q, with additionally favourable distribution of<br />
force over the contact points.<br />
Form V<br />
lance<br />
Tip with extra penetration of open and closed throughplating, and<br />
for level contact surfaces. Penetrates flux and dirt.<br />
Form Y<br />
spade<br />
For application with <strong>test</strong> <strong>probes</strong> in connector systems.<br />
11
Lateral play/pinpointing<br />
(<strong>test</strong> point accuracy)<br />
lateral play in assembled <strong>test</strong> <strong>probes</strong> is caused by the<br />
necessary manufacturing tolerances found between<br />
plunger and barrel. The result is that during application<br />
the tip of the probe can get out of alignment.<br />
The extent of the lateral play at the tip of the probe also<br />
depends on plunger length and on the type of plunger<br />
guide (dual or single) used. The longer the guide and<br />
the shorter the spring, the less this lateral play will be.<br />
In determining <strong>test</strong> point accuracy, the tolerances present<br />
in the <strong>test</strong> adapter being used (play, displacement of the<br />
receptacle assembly holes) must be taken into account.<br />
Optimal pinpointing is achieved by a combination of<br />
spring contact <strong>probes</strong> with the shor<strong>test</strong> possible travel,<br />
double plunger guides and minimal adapter tolerance,<br />
or even perhaps the use of plate guides.<br />
The influence of lateral play on <strong>test</strong> point accuracy can,<br />
depending on the spring contact probe series and tip style<br />
being used, be reduced to 0.8 mm.<br />
Cable Test<br />
Especially for <strong>test</strong>ing cables PTR<br />
offers a wide range of switching pro-<br />
bes, <strong>probes</strong> with thread and push<br />
back <strong>probes</strong>.<br />
All are available with a number<br />
of different tipstyles.<br />
laterel play<br />
12<br />
S<br />
Fig. 1<br />
Fig. 2
Presence Test for ICT<br />
Series 1025 with headstyle C2S is designed for presence<br />
<strong>test</strong>. The plunger is equiped with an isolation cap and<br />
prevents the plunger from hitting the <strong>test</strong> pad area in<br />
case of absence of a component.<br />
Presence Test with<br />
Switching Test Probes<br />
PTR switching <strong>test</strong> <strong>probes</strong> are working on the principle<br />
„closer“. The <strong>test</strong> probe closes a circuit after a defined<br />
„switching travel“. In addition to the standards PTR offers<br />
a variant with an isolated head.<br />
Application:<br />
0-potential when contacting with plastic head<br />
presence <strong>test</strong> of components or connectors, mostly<br />
for cable <strong>test</strong> – secondary locking or plastic units<br />
variable height adjustment from 0 – 5.0 mm<br />
13
Detecting bent pins<br />
For detecting bent connector pins, special tipstyles<br />
with insulators are designed. They avoid electrical contact<br />
to the plunger and give no go signal to the system.<br />
Dimension and shape of insulator and plunger will be<br />
adjusted to the connector´s configuration.<br />
Position Test<br />
Test Probes for Position <strong>test</strong> are designed to detect<br />
the right position of the sockets inside of a connector.<br />
The special head of the probe is equiped with a plate<br />
that sets up on the connector housing. The height of the<br />
edge is specified exactely according to the max. depth<br />
the socket should have.<br />
When the <strong>test</strong> probe do not make a contact to the socket,<br />
because it is missing or not in right position, the <strong>test</strong>system<br />
gets an information about a defect connector.<br />
Switching Test Probe –<br />
Easy Replacement Design<br />
The new PTR receptacle system for switching <strong>test</strong><br />
<strong>probes</strong> offers the possibility for rapid probe replacement<br />
without desoldering the wire. The wire has to be soldered<br />
once to the connector pin of the receptacle.<br />
The receptacle features an insulated dual-contact arrange-<br />
ment that allows a probe to be fitted and replaced in the<br />
receptacle without any wiring or de-soldering. This helps<br />
reducing the time in the replacement process.<br />
14
Test Probes<br />
Available Headstyles<br />
Headstyles<br />
G3<br />
60°<br />
0,28 • Au<br />
1001 H 1001 V700<br />
Diameter • Plating<br />
15<br />
Series 1001<br />
Mechanical<br />
Spacing 0,76 mm/30 mil<br />
Full travel 2,00 mm<br />
Recommended working travel 1,35 mm<br />
Pre-loaded spring force 0,13 N<br />
Spring force at working travel 0,30 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 0,5 A<br />
Typ. continuity resistance<br />
Materials<br />
< 150 mOhm<br />
Barrel bronze, gold plated<br />
Spring stainless steel, gold plated<br />
Plunger steel, gold plated<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 0,53 mm<br />
(HSS-Drill, 12000 min.***1)<br />
How to order:<br />
1001 - G3 - 0,3 N - Au - 0,28<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
SERIES 1001
SERIES 1002<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B<br />
30°<br />
0,37 • Rh<br />
1002 H 1002 V700<br />
16<br />
Series 1002<br />
Mechanical<br />
Spacing 1,02 mm/40 mil<br />
Full travel 2,00 mm<br />
Recommended working travel 1,35 mm<br />
Pre-loaded spring force 0,25 N<br />
Spring force at working travel 0,40 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 1,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 100 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, rhodium plated<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 0,63 mm<br />
(HSS-Drill, 12000 min.***1)<br />
How to order:<br />
1002 - B - 0,4 N - Rh - 0,37<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles<br />
B<br />
30°<br />
0,50 • Au<br />
1003 H 1003 V 450<br />
Diameter • Plating<br />
17<br />
Series 1003<br />
Mechanical<br />
Spacing 1,02 mm/40 mil<br />
Full travel 1,30 mm<br />
Recommended working travel 1,00 mm<br />
Pre-loaded spring force 0,40 N<br />
Spring force at working travel 0,75 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 1,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 100 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 0,63 mm<br />
(HSS-Drill, 12000 min.***1)<br />
How to order:<br />
1003 - B - 0,75 N - Au - 0,5<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
SERIES 1003
SERIES 1005<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B 30°<br />
19,5<br />
10,5<br />
5,0<br />
1005<br />
ø 0,35<br />
ø 0,8<br />
ø 0,7<br />
0,35C • Au<br />
18<br />
Series 1005<br />
Mechanical<br />
Spacing 1,00 mm/40 mil<br />
Full travel 3,80 mm<br />
Recommended working travel 3,00 mm<br />
Pre-loaded spring force 0,20 N<br />
Spring force at working travel 0,80 N<br />
(± 20%)<br />
Electrical<br />
Max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 20 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe, gold plated<br />
Recommended Diameter of Drill<br />
How to order:<br />
0,70 mm<br />
1005 - B - 0,8 N - Au - 0,35 C<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B<br />
D<br />
G<br />
G3<br />
60°<br />
30°<br />
60°<br />
0,51 • Au<br />
0,53 • Au<br />
0,51 • Au<br />
0,28 • Au<br />
1006 H 1006<br />
19<br />
Series 1006<br />
Mechanical<br />
Spacing 1,02 mm/40 mil<br />
Full travel 2,29 mm<br />
Recommended working travel 1,27 mm<br />
Pre-loaded spring force 0,17/0,15 N<br />
Spring force at working travel 0,37/0,45 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 55 mOhm<br />
Barrel bronze, gold plated<br />
Spring bronze/stainless steel, gold plated<br />
Plunger CuBe, gold plated<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 0,97 mm<br />
(HSS-Drill, 12000 min.***1)<br />
How to order:<br />
1006 - B - 0,45 N - Au - 0,51 C<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe<br />
SERIES 1006
SERIES 1007<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
C<br />
D<br />
D<br />
H<br />
30°<br />
30°<br />
0,90 • Au<br />
0,49 • Au<br />
0,90 • Au<br />
0,49 • Au<br />
0,85 • Au<br />
0,90 • Au 1,50 • Au<br />
1007 1007-C + H H 1007 C H 1007 L<br />
20<br />
Series 1007<br />
Mechanical<br />
Spacing 1,27 mm/50 mil<br />
Full travel 2,80 mm<br />
Recommended working travel 2,40 mm<br />
Pre-loaded spring force 0,25/0,25/0,40 N<br />
Spring force at working travel 0,70/1,00/1,70 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 1,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 30 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel/CuBe<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 0,86 mm<br />
with inserted press ring 0,93 mm<br />
HGW 2372 0,88 mm<br />
with inserted press ring 0,94 mm<br />
How to order:<br />
1007 - A - 0,7 N - Au - 0,9<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
G3<br />
60°<br />
0,51 • Rh<br />
1007.50 H 1007.50<br />
21<br />
Series 1007.50<br />
Mechanical<br />
Spacing 1,27 mm/50 mil<br />
Full travel 2,00 mm<br />
Recommended working travel 1,35 mm<br />
Pre-loaded spring force 0,35 N<br />
Spring force at working travel 0,75 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 75 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, rhodium plated<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 0,84 mm<br />
HGW 2372 0,84 mm<br />
How to order:<br />
1007.50 - G3 - 0,75 N - Rh - 0,51<br />
Series<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
SERIES 1007.50
SERIES 1007.60<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B<br />
E<br />
G3<br />
K<br />
60°<br />
90°<br />
30°<br />
60°<br />
0,50 • Rh<br />
0,80• Rh<br />
0,28 • Rh<br />
0,90 • Rh<br />
1007.60 H 1007.60 V700<br />
22<br />
Series 1007.60<br />
Mechanical<br />
Spacing 1,27 mm/50 mil<br />
Full travel 2,54 mm<br />
Pre-loaded spring force 0,20/0,30 N<br />
Spring force at working travel 0,80/1,50 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 50 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe, rhodium plated<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 0,87 mm<br />
with inserted press ring 0,95 mm<br />
HGW 2372 0,87 mm<br />
with inserted press ring 0,95 mm<br />
How to order:<br />
1007.60 - K - 0,8 N - Rh - 0,9 C<br />
Series<br />
Dimensions and Mounting Measures<br />
Headstyle Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
Tip Material:<br />
(mm) CuBe
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B<br />
C<br />
D<br />
G3<br />
30°<br />
60°<br />
0,53 • Au<br />
0,89 • Au<br />
0,89 • Au<br />
0,28 • Au<br />
1007.70 H 1007.70 V915<br />
23<br />
Series 1007.70<br />
Mechanical<br />
Spacing 1,27 mm/50mil<br />
Full travel 1,27 mm<br />
Pre-loaded spring force 0,40/0,50 N<br />
Spring force at working travel 0,90/1,40 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
< 25 mOhm<br />
Materials<br />
Barrel bronze, gold plated<br />
Spring stainless steel/spring steel,<br />
gold plated<br />
Plunger CuBe, gold plated<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 0,87 mm<br />
with inserted press ring 0,95 mm<br />
HGW 2372 0,87 mm<br />
with inserted press ring 0,95 mm<br />
How to order:<br />
1007.70 - C - 0,8 N - Au - 0,89 C<br />
Series<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure Plating<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe<br />
SERIES 1007.70
SERIES 1008/E<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
D<br />
H<br />
Q<br />
V<br />
V1<br />
VL2<br />
ø 0,5<br />
ø 0,5<br />
0,5<br />
6,9<br />
16,0<br />
0,5<br />
8,9 6,9<br />
18,0<br />
16,0<br />
30°<br />
10°<br />
25°<br />
10°<br />
43,2<br />
45,2<br />
43,2<br />
1008/E<br />
0,90C • Au<br />
0,50C • Au<br />
0,50 • Au<br />
0,90C • Au<br />
0,50 • Au<br />
0,50 • Au<br />
0,50 • Au<br />
0,50 • Au<br />
ø 0,78<br />
ø 0,78<br />
1008/E<br />
1008/E-VL2<br />
7,9<br />
ø 1,05<br />
24<br />
Series 1008/E<br />
Mechanical<br />
Spacing 1,27 mm/50 mil<br />
Full travel 6,40 mm<br />
Recommended working travel 4,30 mm<br />
Pre-loaded spring force 0,30/0,40/0,50 N<br />
Spring force at working travel 1,00/1,50/2,00 N<br />
Electrical<br />
max. current rating 2,0-3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1008/E - C - 1,5 N - Au - 0,9 C<br />
ø 0,95<br />
40,6<br />
ø 0,67<br />
ø 1,2<br />
12,0<br />
< 20 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel or CuBe<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 0,95 ... 0,96 mm<br />
with inserted press ring 1,02 mm<br />
HGW 2372 0,96 ... 0,97 mm<br />
with inserted press ring 1,03 mm<br />
How to order:<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip<br />
Diameter<br />
(mm)<br />
H 1008/E<br />
H 1008/E-L<br />
H 1008/E-ST<br />
ST 1008/E ST 1008/E<br />
Tip Material:<br />
CuBe
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
C<br />
D<br />
F<br />
G<br />
H<br />
60°<br />
30°<br />
30°<br />
1,50 • Au<br />
0,45 • Au/Ni<br />
1,50 • Au<br />
1,00 • Au<br />
1,50 • Ni<br />
1,50 • Rh<br />
1,50 • Ni<br />
1010 H 1010 C H 1010 L H 1010 W<br />
25<br />
Series 1010<br />
Mechanical<br />
Spacing 1,91 mm/75 mil<br />
Full travel 3,00 mm<br />
Recommended working travel 2,40 mm<br />
Pre-loaded spring force 0,20 N<br />
Spring force at working travel 0,80 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 2,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 20 mOhm<br />
Barrel bronze, gold plated<br />
Spring stainless steel, nickel plated<br />
Plunger steel<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,30 mm<br />
with inserted press ring 1,46 mm<br />
HGW 2372 1,32 mm<br />
with inserted press ring 1,47 mm<br />
How to order:<br />
1010 - A - 0,8 N - Au - 1,5<br />
Series<br />
Headstyle<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
SERIES 1010
SERIES 1010.50<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
G3<br />
K<br />
60°<br />
30°<br />
30°<br />
0,72 • Rh<br />
0,72 • Rh<br />
0,72 • Rh<br />
1,30 • Rh 1,50 • Rh<br />
1010.50 H 1010.50 W7 H 1010.50 W9 H 1010.50 WT9<br />
26<br />
Series 1010.50<br />
Mechanical<br />
Spacing 1,91 mm/75 mil<br />
Full travel 2,54 mm<br />
Pre-loaded spring force 0,18/0,32 N<br />
Spring force at working travel 0,80/1,25 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 50 mOhm<br />
Barrel bronze, gold plated<br />
Spring stainless steel, unplated<br />
Plunger CuBe, rhodium plated<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,30 mm<br />
with inserted press ring 1,40 mm<br />
HGW 2372 1,31 mm<br />
with inserted press ring 1,41 mm<br />
How to order:<br />
1010.50 - K - 1,25 N - Rh - 1,5 C<br />
Series<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
Tip Material:<br />
(mm) CuBe
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
0,72 • Rh<br />
1011 H 1011 WT7 H 1011 WT9<br />
27<br />
Series 1011<br />
Mechanical<br />
Spacing 1,91 mm/75 mil<br />
Full travel 4,20 mm<br />
Pre-loaded spring force 0,30/0,30 N<br />
Spring force at working travel 1,10/1,50 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 50 mOhm<br />
Barrel bronze, gold plated<br />
Spring stainless steel, unplated<br />
Plunger CuBe, rhodium plated<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,30 mm<br />
with inserted press ring 1,40 mm<br />
HGW 2372 1,31 mm<br />
with inserted press ring 1,41 mm<br />
How to order:<br />
1011 - A - 1,1 N - Rh - 0,72 C<br />
Series<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure Plating<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe<br />
SERIES 1011
SERIES 1012 • 1012/Z<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B 30°<br />
BS<br />
C<br />
D<br />
H 30°<br />
K/KL4<br />
Q<br />
Q3<br />
V/VL4<br />
33,0<br />
15,6<br />
2<br />
90°<br />
ø 0,78<br />
ø 1,0<br />
0,78 • Au<br />
0,50 • Au<br />
1,20 • Au<br />
0,78 • Au<br />
0,89 • Au 1,20 • Au<br />
1,20 • Au<br />
0,78 • Au<br />
1,20 • Au<br />
0,78 • Au/Ni<br />
35,0<br />
17,6<br />
4<br />
30,4<br />
7,6<br />
5,7<br />
1012 1012 1012/Z 1012-...L4 1012-....L4 H 1012 H 1012 C C H 1012 L H H 1012 1012 W W H H 1012 1012 W18 W18<br />
28<br />
Series 1012 • 1012/Z<br />
Mechanical<br />
Spacing 1,91 mm/75 mil<br />
Full travel 6,30 mm<br />
Recommended working travel 5,00 mm<br />
Pre-loaded spring force 0,40/0,40/0,50 N<br />
Spring force at working travel 1,15/1,50/2,10 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1012 - C - 1,15 N - Au - 1,2<br />
ø 1,41<br />
ø 1,31<br />
ø 1,12<br />
10,0<br />
< 30 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel/CuBe<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,30 mm<br />
with inserted press ring 1,36 mm<br />
HGW 2372 1,32 mm<br />
with inserted press ring 1,37 mm<br />
How to order:<br />
Series<br />
Dimensions and Mounting Measures<br />
Headstyle Contact<br />
Pressure Plating<br />
� 0,64<br />
18,0<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B 30°<br />
BST1<br />
BST2 60°<br />
C<br />
D<br />
G 60°<br />
H 30°<br />
M1<br />
Q<br />
Q<br />
Q<br />
V<br />
V1<br />
VL2<br />
7,7<br />
1,3<br />
7,7<br />
9,7<br />
ø 0,64<br />
16,0<br />
18,0<br />
90°<br />
10° 10°<br />
25°<br />
20°<br />
33,1<br />
35,1<br />
35,1<br />
1,20C • Au<br />
0,64 • Au<br />
0,64 • Au<br />
0,64 • Au<br />
1,00 • Au<br />
1,20 • Au<br />
0,64C • Au<br />
1,15 • Au<br />
0,64 • Au<br />
1,20 • Au<br />
1,20 • Au<br />
0,50 • Au<br />
0,64 • Au<br />
1,00 • Au 1,15 •Au<br />
0,64 • Au<br />
0,64 • Au<br />
0,64 • Au<br />
ø 1,02<br />
1012/E<br />
1012/E-VL2<br />
1012/E2<br />
7,6<br />
ø 1,41<br />
29<br />
Series 1012/E<br />
Mechanical<br />
Spacing 1,91 mm/75 mil<br />
Full travel 6,40 mm<br />
Recommended working travel 4,30 mm<br />
Pre-loaded spring force 0,30/0,40/0,50/0,70 N<br />
Spring force at working travel 1,00/1,50/2,00/2,80 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0-4,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1012/E - C - 1,5 N - Au - 1,0 C<br />
ø 1,31<br />
30,4<br />
ø 1,12<br />
5,7<br />
0,64<br />
10,0<br />
< 20 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel or CuBe<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,30 mm<br />
with inserted press ring 1,36 mm<br />
HGW 2372 1,32 mm<br />
with inserted press ring 1,37 mm<br />
How to order:<br />
Series<br />
Dimensions and Mounting Measures<br />
Headstyle Contact<br />
Pressure Plating<br />
H 1012 C<br />
H 1012 L<br />
Tip Diameter<br />
(mm)<br />
H 1012 W<br />
Tip Material:<br />
CuBe<br />
SERIES 1012/E
SERIES 1013/Z<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
H 30°<br />
Q<br />
V<br />
38,6<br />
21,2<br />
2,0<br />
ø 0,64<br />
ø 1,0<br />
10°<br />
1,15 • Au<br />
1,15 • Au<br />
1,15 • Au<br />
0,64 • Au<br />
30,4<br />
7,6<br />
5,7<br />
ø 1,41<br />
ø 1,31<br />
ø 1,12<br />
1013/Z H 1012 C H 1012 LL H 1012 W H 1012 W18 W18<br />
30<br />
Series 1013/Z<br />
Mechanical<br />
Spacing 1,91 mm/75 mil<br />
Full travel 12,00 mm<br />
Recommended working travel 9,60 mm<br />
Pre-loaded spring force 0,40/0,35 N<br />
Spring force at working travel 1,20/1,60 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1013/Z - C - 1,6 N - Au - 1,15<br />
10,0<br />
� 0,64<br />
18,0<br />
< 30 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,30 mm<br />
with inserted press ring 1,36 mm<br />
HGW 2372 1,32 mm<br />
with inserted press ring 1,37 mm<br />
How to order:<br />
Series<br />
Dimensions and Mounting Measures<br />
Headstyle Contact<br />
Pressure Plating<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
BS<br />
C<br />
D<br />
D<br />
D7*<br />
E<br />
F<br />
F<br />
G<br />
H<br />
K<br />
Q<br />
60°<br />
90°<br />
30°<br />
30°<br />
1,80 • Au/Ni<br />
0,75 • Au/Rh/Ni<br />
0,38 • Au/Ni<br />
1,30 • Au 1,80 • Au/Ni<br />
0,65 • Au/Ni 0,75 • Au/Rh<br />
1,25 • Au/Ni<br />
0,65 • Au<br />
1,80 • Au/Ni<br />
0,75 • Rh<br />
1,80 • Rh<br />
1,30 • Rh 1,80 • Au/Ni<br />
1,30 • Rh<br />
3,00 • Rh<br />
1,80 • Au/Ni<br />
0,75 • Au<br />
1,80 • Au<br />
1015 1015-D7* H 1015 C H 1015 L H 1015 W H 1015 WR H 1015 C-K*<br />
31<br />
Series 1015<br />
Mechanical 1015-standard 1015-D7<br />
Spacing 2,54 mm/100 mil<br />
Full travel 4,40 mm 2,75 mm<br />
Recommended working travel 3,50 mm 2,00 mm<br />
Pre-loaded spring force 0,25/0,4/0,4/0,3/0,7/0,6 N 0,25/0,40/<br />
0,40 N<br />
Spring force at working travel 0,7/1,0/1,5/1,7/2,5/3,0 N 0,50/0,75/<br />
(± 20%)<br />
1,10 N<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 30 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel/CuBe<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill H 1015<br />
HP 2361.1 (Trolitax) 1,67 mm<br />
with inserted press ring 1,75 mm<br />
HGW 2372 1,69 mm<br />
with inserted press ring 1,76 mm<br />
How to order:<br />
1015 - A - 1,5 N - Au - 1,8<br />
Series<br />
Headstyle<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
*short version for easy-pull-off<br />
of broken pins.<br />
Also available:<br />
H 1015 L-K<br />
H 1015 W-K<br />
SERIES 1015
SERIES 1015.50<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
1,35 • Rh<br />
1015.50 H 1015.50 WT7 H 1015.50 WT9<br />
32<br />
Series 1015.50<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 4,20 mm<br />
Pre-loaded spring force 0,35/0,50/0,70 N<br />
Spring force at working travel 1,00/1,50/2,50 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 50 mOhm<br />
Barrel bronze, gold plated<br />
Spring stainless steel, unplated<br />
Plunger CuBe, rhodium plated<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,66 mm<br />
with inserted press ring 1,81 mm<br />
HGW 2372 1,67 mm<br />
with inserted press ring 1,82 mm<br />
How to order:<br />
1015.50 - A - 1,5 N - Rh - 1,35 C<br />
Series<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B<br />
C<br />
D<br />
F<br />
1016<br />
E<br />
H<br />
K<br />
Q<br />
B1*<br />
H2*<br />
1018<br />
K<br />
K6<br />
TA<br />
90°<br />
30°<br />
60°<br />
30°<br />
90°<br />
60°<br />
30°<br />
1,00 • Au<br />
1,80 • Ni<br />
1,00 • Au<br />
1,80 • Au/Rh<br />
1,80 • Au<br />
1,80 • Rh<br />
1,80 • Rh<br />
1,80 • Ni/Rh<br />
1,00 • Au<br />
1,00 • Au<br />
1,90 • Ni<br />
1,90 • Ni<br />
1,20 • Rh 1,90 • Rh<br />
Interface Contact<br />
for Rohde & Schwarz-<br />
Test Systems<br />
1016 1016 - B1* 1016 - H2* 1018<br />
33<br />
Series 1016 • 1018<br />
Mechanical 1016/1018 1016-B1* 1016-H2*<br />
Spacing 2,54 mm/100 mil<br />
Full travel 4,40 mm 3,10 mm 4,20 mm<br />
Recommended working travel 3,50 mm<br />
Pre-loaded spring force 0,40/0,70/0,90 N 0,55 N 0,40 N<br />
Spring force at working travel 1,50/2,25/3,00 N<br />
(± 20%)<br />
1,25 N 1,00 N<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
< 30 mOhm<br />
Materials<br />
Barrel bronze, gold plated<br />
Spring spring steel/stainless steel<br />
(1016-H2), gold plated<br />
Plunger steel/CuBe(1016-B1/1016-H2)<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,67 mm<br />
with inserted press ring 1,75 mm<br />
HGW 2372 1,69 mm<br />
with inserted press ring 1,76mm<br />
How to order:<br />
1016 - C - 1,5 N - Au - 1,8 (C)*<br />
Series<br />
Test Probes for<br />
Luther & Maelzer-<br />
Text Fixtures<br />
Headstyle<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe<br />
Available Receptacles see<br />
series 1015 at page 31<br />
SERIES 1016 • 1018
SERIES 1025/E<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
BST1<br />
BST2<br />
BST3<br />
C<br />
C1<br />
CS1<br />
D1<br />
D<br />
F<br />
G<br />
H<br />
H<br />
60°<br />
6,4<br />
1,5<br />
90°<br />
7,0<br />
60°<br />
0,9<br />
30°<br />
30°<br />
29,1°<br />
1,50C • Au<br />
2,00C • Au<br />
0,90 • Au<br />
0,62 • Au<br />
0,90 • Au<br />
1,60C • Au<br />
1,30 • Au<br />
2,00C • Au<br />
3,00C • Au<br />
2,30/3,10C • Au<br />
1,60C • Au<br />
0,64C • Au<br />
0,90C • Au<br />
1,50 • Au<br />
1,06• Au<br />
1,50 • Au<br />
0,90 • Au<br />
1,50 • Au<br />
2,50 • Au<br />
1,50C • Au<br />
2,50C • Au<br />
1,30 • Au<br />
34<br />
K<br />
M<br />
M1<br />
M6<br />
Q<br />
Q<br />
Q5<br />
Q8<br />
V<br />
V1<br />
HL2<br />
VL2<br />
10°<br />
25°<br />
30°<br />
10°<br />
1,70 • Au<br />
1,30 • Au<br />
1,30 • Au<br />
1,50 • Au<br />
1,30 • Au<br />
0,50 • Au<br />
0,80 • Au<br />
1,06 • Au<br />
1,30 • Au<br />
1,06 • Au<br />
1,50 • Au<br />
0,90 • Au<br />
0,90 • Au<br />
0,90C • Au<br />
0,90 • Au
Series 1025/E<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 6,40 mm<br />
Recommended working travel 4,30 mm<br />
Pre-loaded spring force 0,20/0,25/0,40/0,60/0,50/1,00/1,40 N<br />
Spring force at working travel 0,60/1,00/1,50/2,00/2,25/3,00/4,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 5,0-8,0 A<br />
Typ. continuity resistance<br />
Materials<br />
8,4<br />
ø 0,9<br />
2<br />
8,4<br />
10,4<br />
8,4<br />
16,3<br />
18,3<br />
21,3<br />
< 20 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle bronze, gold plated<br />
33,4<br />
ø 1,37<br />
H 1025/E 1025 E<br />
1025/E- ...L2<br />
35,4<br />
35,4<br />
38,4<br />
1025/E2 1025/E2<br />
1025/E5<br />
7,6<br />
ø 1,83<br />
ø 1,66<br />
29,6<br />
35<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,65 mm<br />
with inserted press ring 1,75 mm<br />
HGW 2372 1,67 mm<br />
with inserted press ring 1,76 mm<br />
How to order:<br />
1025/E - C - 1,5 N - Au - 1,5C<br />
Series<br />
ø 1,25<br />
4,8<br />
0,64<br />
10,0<br />
Headstyle<br />
Contact<br />
Pressure Plating<br />
Dimensions and Mounting Measures<br />
H 1025 C<br />
H 1025 L<br />
H 1025 W<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe<br />
SERIES 1025/E
SERIES 1025 • 1025/Z<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A 90°<br />
B 30°<br />
BST<br />
C<br />
C1<br />
C2S<br />
D<br />
D1<br />
Q/QL4<br />
33,0<br />
15,9<br />
2<br />
24,7<br />
ø 1,0<br />
ø 1,37<br />
35,0<br />
2,3/3,2 • Au<br />
2,40 • Au (HTK)<br />
5,08<br />
E 1,50 • Au/Ni<br />
G 60°<br />
H 30°<br />
K/KL4 90°<br />
M<br />
M1<br />
1,50 • Au/Rh/Ni<br />
1,00 • Au/Rh/Ni<br />
0,62 • Au/Ni<br />
1,50 • Au<br />
3,00 • Au<br />
0,64 • Au<br />
1,50 • Au/Rh/Ni<br />
1,50 • Au<br />
1,40 • Au/Ni<br />
1,30 • Au/Rh/Ni<br />
1,50 • Au/Ni<br />
17,9<br />
4<br />
29,6<br />
2,00 • Au<br />
1,00 • Au 1,50 • Au/Ni<br />
1,30 • Au/Rh/Ni 1,50 • Au/Ni<br />
1,50 • Au<br />
(nur Q)<br />
7,6<br />
4,8<br />
ø 1,83<br />
ø 1,66<br />
ø 1,25<br />
1025 - D - 1,5 N - Au - 1,5<br />
1025 1025/Z 1025-...L4 H 1025 C H 1025 L H 1025 W H 1025 C-K*<br />
1025 1025/Z 1025-...L4 H 1025 C H 1025 L H 1025 W H 1025 C-K<br />
36<br />
Q5<br />
V/VL4<br />
Mechanical<br />
10,0<br />
� 0,64<br />
27,6<br />
5,6<br />
1)<br />
1,00 • Au/Ni<br />
1,00 • Au/Ni<br />
Series 1025 • 1025/Z<br />
Spacing 2,54 mm/100 mil<br />
Full travel 6,30 mm<br />
Recommended working travel 5,00 mm<br />
Pre-loaded spring force 0,50/0,50/0,50/0,50 N<br />
only BST: 0,40/0,40/0,40 N<br />
Spring force at working travel 1,10/1,50/2,25/3,00 N<br />
(± 20%)<br />
only BST: 1,50/2,25/3,00 N<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 25 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,65 mm<br />
with inserted press ring 1,75 mm<br />
HGW 2372 1,67 mm<br />
with inserted press ring 1,76mm<br />
How to order:<br />
Series Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter (mm)<br />
*short version for easy-pulloff<br />
of broken pins.<br />
Also available:<br />
H 1025 L-K<br />
H 1025 W-K
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B<br />
BST<br />
C<br />
G<br />
H<br />
M1<br />
Q<br />
Q<br />
V<br />
36,6<br />
19,5<br />
2<br />
24,6<br />
ø 0,75<br />
ø1,37<br />
60°<br />
38,6<br />
30°<br />
21,5<br />
30°<br />
0,75 • Au/Ni<br />
0,62 • Ni<br />
1,50 • Au<br />
1,50 • Au<br />
1,50 • Au<br />
1,40 • Au<br />
1,00 • Au/Rh<br />
1,30 • Au 1,50 • Au<br />
0,75 • Ni<br />
29,6<br />
4,8 7,6<br />
ø1,83<br />
ø1,66<br />
ø1,24<br />
1034 1036 H 1025 C H 1025 L H 1025 W H 1025 C-K*<br />
10,0<br />
37<br />
Series 1034 • 1036<br />
Mechanical FK 1034 FK 1036<br />
Spacing 2,54 mm/100 mil<br />
Full travel 10,00 mm 12,00 mm<br />
Recommended working travel 8,00 mm 10,00 mm<br />
Pre-loaded spring force 0,60/0,70 N 0,30/0,35 N<br />
Spring force at working travel<br />
(± 20%)<br />
1,50/2,25 N 1,50/2,25 N<br />
Electrical<br />
max. current rating 3,0 A 3,0 A<br />
Typ. continuity resistance < 25 mOhm < 30mOhm<br />
Materials<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,65 mm<br />
with inserted press ring 1,75 mm<br />
HGW 2372 1,67 mm<br />
with inserted press ring 1,76 mm<br />
How to order:<br />
1036 - C - 2,25 N - Au - 1,5<br />
27,6<br />
0,63<br />
Series<br />
5,6<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
Plating<br />
*short version for easy-pull-off<br />
of broken pins.<br />
Also available:<br />
H 1025 L-K<br />
H 1025 W-K<br />
Tip Diameter<br />
(mm)<br />
SERIES 1034 • 1036
SERIES 1064<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
D<br />
D<br />
H<br />
H<br />
H<br />
H1<br />
H1<br />
H2<br />
53°<br />
73°<br />
76°<br />
53°<br />
66°<br />
30°<br />
1,96 • Au<br />
1,96 • Au<br />
1,17 • Au<br />
1,96 • Au<br />
3,30 • Au<br />
3,96 • Au<br />
1,57 • Au<br />
2,49 • Au<br />
1,96 • Au<br />
for Headstyle for Headstyle for Headstyle<br />
A/D and H1 H H2<br />
1064 1064 1064 H 1064 L H 1064 C H 1064 W<br />
38<br />
Series 1064<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 1,27 mm<br />
Recommended working travel to 1,27 mm<br />
Pre-loaded spring force 0,20/0,35/0,35 N<br />
Spring force at working travel 0,60/1,25/1,85 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 5,0 A<br />
Typ. continuity resistance<br />
< 65...100 mOhm<br />
Materials<br />
Barrel nickel silver, unplated<br />
Spring spring steel/stainless steel,<br />
silver plated<br />
Plunger CuBe<br />
Receptacle nickel silver, unplated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,70 mm - 1,75 mm<br />
HGW 2372 1,70 mm - 1,75 mm<br />
How to order:<br />
1064 - D - 0,6 N - Au - 1,96 C<br />
Series<br />
Headstyle Contact<br />
Pressure Plating<br />
Dimensions and Mounting Measures<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
BST<br />
C<br />
D<br />
D<br />
D1<br />
F<br />
F<br />
F1<br />
G<br />
H<br />
K<br />
M<br />
Q<br />
5<br />
5<br />
60°<br />
60°<br />
30°<br />
30°<br />
2,00 • Au/Ni<br />
0,80 • Au/Ni 1,00 • Au/Ni<br />
0,80 • Au/Ni<br />
1,30 • Au/Ni<br />
2,00 • Au/Ni<br />
0,80 • Au 1,00 • Au<br />
0,65 • Au/Ni<br />
1,00 • Au/Ni<br />
1,80 • Rh<br />
1,80 • Au/Ni<br />
3,00 • Rh<br />
1,30 • Au/Ni 1,80 • Ni<br />
1,50 • Au 2,00 • Au<br />
0,65 • Ni<br />
1,30 • Ni<br />
2,00 • Au/Ni<br />
1,80 • Rh 2,00 • Rh<br />
2,00 • Rh<br />
1,80 • Au/Rh<br />
1,00 • Ni 1,30 • Au/Ni<br />
2021 2021/5 1021/X 1021/5R H 2021 L H 2021 W<br />
39<br />
Series 2021 • 1021<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,30 mm<br />
Recommended working travel 4,00 mm<br />
Pre-loaded spring force 0,30/0,40/0,35/0,70/1,00/1,00 N<br />
Spring force at working travel 0,70/1,00/1,50/2,25/3,00/5,00 N<br />
(± 20%)<br />
2021/5: 0.70/1.00 N not available; 1021/X: 0.70 N not available<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 25 mOhm<br />
Barrel bronze/brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle bronze, gold plated<br />
Recommended H 2021<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,99 mm<br />
HGW 2372 2,00 mm<br />
How to order:<br />
2021/5 - F - 1,5 N - Au - 2,0<br />
Series<br />
Body<br />
Extension<br />
Headstyle Contact<br />
Pressure<br />
Body<br />
Extension<br />
X<br />
7<br />
8<br />
10<br />
Plating<br />
Mounting<br />
Height<br />
Y<br />
15,5<br />
16,5<br />
18,5<br />
Tip Diameter<br />
(mm)<br />
Dimensions and Mounting Measures<br />
Probe<br />
Length<br />
Z<br />
37,3<br />
38,3<br />
40,3<br />
SERIES 2021 • 1021
SERIES 2024 • 1024<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B<br />
BST<br />
C<br />
D<br />
G<br />
H<br />
K<br />
M<br />
Q<br />
V<br />
60°<br />
30°<br />
90°<br />
30°<br />
1,00 • Ni<br />
0,80 • Au<br />
1,30 • Rh 2,00 • Ni<br />
1,00 • Ni<br />
1,30 • Ni 2,00 • Ni<br />
1,30 • Rh<br />
2,00 • Ni<br />
1,50 • Au<br />
1,30 • Ni<br />
1,00 • Ni<br />
2024 1024/X H 2021 L<br />
2024/X H 2021 W<br />
40<br />
Series 2024 • 1024<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 10,00 mm<br />
Recommended working travel 8,00 mm<br />
Pre-loaded spring force 0,40/0,50/1,00 N<br />
Spring force at working travel 1,50/2,50/3,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 30 mOhm<br />
Barrel bronze/brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,99 mm<br />
HGW 2372 2,00 mm<br />
How to order:<br />
2024 - G - 1,5 N - Ni - 1,3<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Series<br />
1024<br />
1024<br />
2024<br />
1024<br />
Body<br />
Extension<br />
X<br />
5<br />
7<br />
8<br />
10<br />
Plating<br />
Mounting<br />
Height<br />
Y<br />
18,2<br />
20,2<br />
21,2<br />
23,2<br />
Tip Diameter<br />
(mm)<br />
Probe<br />
Length<br />
Z<br />
40<br />
42<br />
43<br />
45
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
BST<br />
C<br />
D<br />
D1<br />
EB<br />
G<br />
H<br />
V<br />
2,5<br />
60°<br />
30°<br />
30°<br />
1,80 • Ni 1,50 • Au<br />
1,30 • Rh<br />
0,80 • Ni/Au<br />
1,80 • Rh 2,50 • Rh<br />
1,40 • Au<br />
0,65 • Ni 0,80 • Ni<br />
1,80 • Au<br />
1,30 • Ni 1,50 • Rh<br />
1,40 • Au<br />
1,30 • Ni<br />
2028 2028/5 1028/5R H 2021 L H 2021 W<br />
41<br />
Series 2028 • 1028<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,30 mm<br />
Recommended working travel 4,00 mm<br />
Pre-loaded spring force 0,30/0,40/0,35/0,75/1,00/1,00 N<br />
Spring force at working travel 0,70/1,00/1,50/2,25/3,00/5,00 N<br />
(± 20%)<br />
2028/5: 0.70 / 1.00 N not available; 1028/5R: 0.70 N not available<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 25 mOhm<br />
Barrel bronze/brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle bronze, gold plated<br />
Recommended H 2021<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,99 mm<br />
HGW 2372 2,00 mm<br />
How to order:<br />
2028 - A - 1,5 N - Ni - 1,8<br />
Series<br />
Headstyle<br />
Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Dimensions and Mounting Measures<br />
SERIES 2028 • 1028
SERIES 2029<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
BST<br />
C<br />
D<br />
EB<br />
G<br />
H<br />
M1<br />
Q<br />
Q5<br />
V<br />
60°<br />
30°<br />
30°<br />
1,50 • Ni<br />
1,30 • Rh<br />
0,80 • Au/Ni<br />
1,30 • Ni 1,50 • Rh<br />
1,50 • Au<br />
1,80 • Au<br />
1,30 • Ni/Au 1,50 • Ni<br />
1,30 • Au<br />
1,80 • Au<br />
1,50 • Au<br />
1,50 • Ni<br />
1,30 • Au/Ni<br />
1,30 • Ni<br />
1,50 • Ni<br />
2029/5 2029/8* H 2021 L H 2021 W<br />
42<br />
Series 2029<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 8,00 mm<br />
Recommended working travel 6,40 mm<br />
Pre-loaded spring force 0,35/0,70/0,80 N<br />
Spring force at working travel 1,50/2,25/3,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 30 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, silver plated<br />
Plunger steel<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,99 mm<br />
HGW 2372 2,00 mm<br />
How to order:<br />
2029/5 - C - 1,5 N - Rh - 1,5<br />
Series<br />
Body<br />
Extension<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
* only for headstyles<br />
B/BST/Q5/V<br />
Plating<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
BST1<br />
V<br />
45,0<br />
19,6<br />
35,0<br />
2<br />
8,9<br />
4,0<br />
90°<br />
ø 1,0<br />
2,0<br />
ø 2,5<br />
ø 1,65<br />
M1,6<br />
26°<br />
12°<br />
3,5<br />
1,30 • Au<br />
1,00 • Au<br />
1,30 • Au<br />
33,0<br />
10,0<br />
0,2<br />
ø 2,01<br />
ø 1,97<br />
5248/G 5248/G-V H 1021/GR-C H 1021/GR-L H H1021/GRV-L<br />
1021/GRV-L<br />
ø 2,2<br />
43<br />
Series 5248/G – Flying Probe<br />
Mechanical 5248/G 5248/G-V<br />
Spacing 2,54 mm/100 mil<br />
Full travel 8,00 mm 6,50 mm<br />
Recommended working travel 6,40 mm 5,00 mm<br />
Pre-loaded spring force 0,50 N 0,50 N<br />
Spring force at working travel<br />
(± 20%)<br />
1,75 N 1,50 N<br />
max. Spring force 1,75 N<br />
Electrical<br />
max. current rating 3 A<br />
Typ. continuity resistance<br />
Materials<br />
5248/G - A - 1,75N - Au - 1,3<br />
35,0<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring stainless steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,00 mm<br />
HGW 2372 2,03 mm<br />
How to order:<br />
Series<br />
Body<br />
Extension<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
Due soldering the<br />
wire at the solder<br />
cup, the receptacle<br />
becomes vacuum<br />
tight.<br />
Please avoid that<br />
solder gets into the<br />
thread area of the<br />
receptacle.<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
SERIES 5248/G
SERIES 5257/G<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
BST1<br />
V<br />
40,0<br />
14,6<br />
30,7<br />
4 4<br />
90°<br />
ø 1,0<br />
1,7<br />
ø 2,3<br />
ø 1,65<br />
M1,6<br />
26°<br />
12°<br />
33,0<br />
10,0<br />
1,40 • Au<br />
1,00 • Au<br />
1,30 • Au<br />
0,2<br />
ø 2,2<br />
ø 2,01<br />
ø 1,97<br />
5257/G 5257/G H 1021/GR-C H 1021/GR-L H 1021/GRV-L<br />
44<br />
Series 5257/G – Flying Probe<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,30 mm<br />
Recommended working travel 4,00 mm<br />
Pre-loaded spring force 0,60 N<br />
Spring force at working travel 1,75 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3 A<br />
Typ. continuity resistance<br />
Materials<br />
5257/G - A - 1,75N - Au - 1,4<br />
35,0<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring stainless steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,00 mm<br />
HGW 2372 2,03 mm<br />
How to order:<br />
Series<br />
Body<br />
Extension<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
Due soldering the<br />
wire at the solder<br />
cup, the receptacle<br />
becomes vacuum<br />
tight.<br />
Please avoid that<br />
solder gets into the<br />
thread area of the<br />
receptacle.<br />
Plating<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
60°<br />
30°<br />
1,30 • Rh 2,50 • Rh<br />
1,30 • Au<br />
2,50 • Au/Ni<br />
1,30 • Au 1,60 • Au/Ni<br />
2,50 • Au<br />
2,50 • Au/Ni<br />
2,50 • Rh<br />
2,50 • Au/Ni<br />
1030 H 1030 C H 1030 L<br />
45<br />
Series 1030<br />
Mechanical<br />
Spacing 3,18 mm/125 mil<br />
Full travel 6,30 mm<br />
Recommended working travel 5,00 mm<br />
Pre-loaded spring force 0,40/0,60/0,70 N<br />
Spring force at working travel 1,50/2,25/3,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 4,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 30 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, silver/gold plated<br />
Plunger steel<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,32 mm<br />
with inserted press ring 2,54 mm<br />
HGW 2372 2,34 mm<br />
with inserted press ring 2,56 mm<br />
How to order:<br />
1030 - A - 1,5 N - Rh - 2,5<br />
Series<br />
Headstyle<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
SERIES 1030
SERIES 1040<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
C<br />
D<br />
E<br />
F<br />
G<br />
H<br />
60°<br />
30°<br />
30°<br />
4,00 • Au/Ni<br />
1,50 • Au/Ni<br />
4,00 • Au/Ni<br />
2,40 • Au/Ni<br />
4,00 • Au/Ni<br />
4,00 • Au/Ni<br />
4,00 • Ni<br />
4,00 • Ni<br />
1040 H 1040 1040 H 1045 L<br />
46<br />
Series 1040<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,50 mm<br />
Recommended working travel 4,40 mm<br />
Pre-loaded spring force 0,50/0,70/0,80/1,50 N<br />
Spring force at working travel 1,50/2,25/3,00/5,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 5,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,99 mm<br />
HGW 2372 3,00 mm<br />
How to order:<br />
1040 - C - 1,5 N - Au - 4,0<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
1042<br />
C<br />
C<br />
F<br />
G<br />
H<br />
1042/G<br />
C<br />
38,0<br />
13,25<br />
19,0<br />
8,0<br />
2,0 4,0<br />
ø1,85<br />
ø3,5<br />
ø3,0<br />
ø1,42<br />
1,85 • Ni<br />
4,00 • Au/Ni<br />
4,00 • Ni<br />
1,85 • Ni<br />
4,00 • Rh<br />
3,00 • Au 4,00 • Au<br />
22,0<br />
0,25<br />
ø3,85<br />
ø3,5<br />
movable movable<br />
beweglich<br />
beweglich<br />
1042 H 1042 H 1042/S 1042/G H 1042/G<br />
47<br />
Series 1042 • 1042G<br />
Mechanical<br />
Spacing 4,50 mm<br />
Full travel 7,00 mm<br />
Recommended working travel 5,60 mm<br />
Pre-loaded spring force 0,40/0,50/0,60 N<br />
Spring force at working travel 1,50/2,25/3,00 N<br />
(± 20%)<br />
Electrical connected to H connected to Plunger<br />
max. current rating 5,0 A 8,0 A<br />
Typ. continuity resistance < 30 mOhm < 15 mOhm<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel/CuBe, gold plated<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,50 mm<br />
HGW 2372 3,52 mm<br />
How to order:<br />
1042/G - C - 1,5 N - Au - 4,0C<br />
Series<br />
Thread<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
5,0<br />
Contact<br />
Pressure<br />
ø1,8<br />
M2,5<br />
Plating<br />
20,7<br />
Tip Material:<br />
CuBe<br />
Tip Diameter<br />
(mm)<br />
ø3,9<br />
SERIES 1042
SERIES 1050 • 1060<br />
Available Headstyles Series 1050 • 1060<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
BA<br />
C<br />
C6<br />
D<br />
D<br />
D2<br />
D3<br />
F<br />
F<br />
F3<br />
G<br />
H<br />
KF<br />
5<br />
5<br />
5<br />
3<br />
4<br />
60°<br />
30°<br />
* with Headstyle D2<br />
** with Headstyle C6<br />
30°<br />
2,50 • Ni 4,00 • Au<br />
1,80 • Rh/Ni<br />
1,80 • Ni<br />
2,30 • Rh/Ni<br />
3,00 • Ni<br />
3,50 • Ni<br />
1,00 • Rh<br />
3,00 • Ni<br />
1,80 • Ni<br />
2,30 • Rh<br />
3,00 • Au<br />
2,50 • Ni<br />
4,20 • Rh<br />
2,50 • Rh/Ni<br />
4,00 • Rh/Ni<br />
2,30 • Ni 2,50 • Ni<br />
0,80 • Rh 1,40 • Au<br />
2,50 • Rh<br />
4,00 • Rh<br />
1,00 • Rh 1,40 • Au<br />
2,30 • Rh<br />
4,00 • Au/Rh/Ni<br />
2,50 • Rh/Ni<br />
3,00 • Ni<br />
2,60 • Ni 4,00 • Ni<br />
1050 1060 1060/5 H 2050 L H 2050 LST H 2060 LST<br />
48<br />
Mechanical 1050 1060<br />
Spacing 4,00 mm 4,00 mm<br />
Full travel 5,50 mm 5,50 mm<br />
Recommended working travel 4,40 mm 4,40 mm<br />
Pre-loaded spring force 0,20/0,20/0,40/1,00/1,00 N 1050<br />
Spring force at working travel<br />
(± 20%)<br />
0,40/0,80/1,50/3,00/5,00 N 1050<br />
Pre-loaded spring force 0,20/0,40/0,50/0,80/0,70 N 1060<br />
Spring force at working travel<br />
(± 20%)<br />
Electrical<br />
0,60/1,50/2,25/3,00/5,00 N 1060<br />
max. current rating 5,0 A<br />
Typ. continuity resistance < 30 mOhm<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle nickel silver, unplated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,00 mm<br />
HGW 2372 3,01 mm<br />
How to order:<br />
1060 - A - 1,5 N - Au - 4,0<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B<br />
BA<br />
30°<br />
1,80 • Ni<br />
1,80 • Rh<br />
1051 1061 1061/5 H 2050 L H 2050 LST H 2060 LST<br />
49<br />
Series 1051 • 1061<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 7,00 mm<br />
Recommended working travel 5,60 mm<br />
Pre-loaded spring force 0,15/0,25/0,40/0,60 N<br />
Spring force at working travel 0,70/0,80/1,50/3,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 5,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 35 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle nickel silver, blank<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,00 mm<br />
HGW 2372 3,01 mm<br />
How to order:<br />
1061 - B - 1,5 N - Ni - 1,8<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Dimensions and Mounting Measures<br />
SERIES 1051 • 1061
SERIES 1054<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A 90°<br />
B 30°<br />
C<br />
D<br />
E<br />
F<br />
G<br />
33,8<br />
17,0<br />
2,5<br />
24,9<br />
90°<br />
ø 1,45<br />
(ø 1,52)<br />
ø 2,36<br />
3,96 • Au<br />
1,52 • Rh<br />
3,96 • Au<br />
1,45 • Au<br />
2,36 • Au/Rh 3,96 • Au<br />
1,45 • Au<br />
1,45 • Ni<br />
30,5<br />
7,6<br />
6,0<br />
1054 H 1054 L<br />
ø 2,87<br />
ø 2,69<br />
ø 2,45<br />
50<br />
Series 1054<br />
Mechanical<br />
Spacing 3,50 mm<br />
Full travel 6,40 mm<br />
Recommended working travel 5,10 mm<br />
Pre-loaded spring force 0,40/0,40/0,50/1,00 N<br />
Spring force at working travel 1,00/1,50/2,50/3,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 5,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 20 mOhm<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle nickel silver, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,71 mm<br />
with inserted press ring 2,89 mm<br />
HGW 2372 2,67 mm<br />
with inserted press ring 2,85 mm<br />
How to order:<br />
1054 - C - 2,5 N - Au - 3,96<br />
Series<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure Plating Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B<br />
D<br />
D<br />
30°<br />
*Recommended<br />
fitting torque 1Ncm<br />
0,45 • Au<br />
0,50 • Au<br />
1,00 • Au/Ni<br />
1010/G H 1010/GR-L WFS 1010/G-1,5-1,0<br />
51<br />
Series 1010/G with thread<br />
Mechanical<br />
Spacing 1,91 mm / 75 mil<br />
Full travel 3,00 mm<br />
Recommended working travel 2,40 mm<br />
Pre-loaded spring force 0,20 N<br />
Spring force at working travel 0,80 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 2,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 20 mOhm<br />
Barrel brass, gold plated<br />
Spring stainless steel, nickel plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,25 mm<br />
HGW 2372 1,26 mm<br />
How to order:<br />
1010/G - D - 0,8 N - Au - 1,0<br />
Series<br />
Thread<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
SERIES 1010/G
SERIES 1015/G<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A 90°<br />
B 30°<br />
BS<br />
C<br />
D<br />
D<br />
D7<br />
E<br />
F<br />
F<br />
G 60°<br />
H 30°<br />
K 90°<br />
27,9<br />
12,8<br />
21,0<br />
2,5<br />
2,5<br />
ø 0,75<br />
� 1,4<br />
ø 1,93<br />
ø 1,37<br />
M 1,4<br />
1,80 • Au/Ni<br />
0,75 • Au/Rh/Ni<br />
0,38 • Au/Ni<br />
1,30 • Au 1,80 • Au/Ni<br />
0,65 • Au/Ni 0,75 • Au/Rh<br />
1,25 • Au/Ni<br />
0,65 • Au<br />
1,80 • Au/Ni<br />
0,75 • Rh<br />
1,80 • Rh<br />
1,30 • Rh 1,80 • Au/Ni<br />
1,30 • Rh 1,80 • Au<br />
1,80 • Au/Ni<br />
27,1<br />
12,0<br />
3,35<br />
2,7<br />
ø 1,5<br />
1015/G 1015/G-D7 H 1015/GR-L H 1015/GRV-L<br />
24,5<br />
3,4<br />
10,0<br />
52<br />
Series 1015/G with thread<br />
Mechanical 1015-standard 1015-D7<br />
Spacing 2,54 mm/100 mil<br />
Full travel 4,40 mm 2,75 mm<br />
Recommended working travel 3,50 mm 2,00 mm<br />
Pre-loaded spring force 0,25/0,4/0,4/0,3/ 0,25/0,4/0,4<br />
0,7/0,6 N 0,4/0,7 N<br />
Spring force at working travel 0,7/1,0/1,5/1,7/ 0,5/0,75/1,0<br />
(± 20%)<br />
2,5/3,0 N 1,1/1,7 N<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1015/G - A - 1,5 N - Au - 1,8<br />
ø 1,85<br />
ø 1,67<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel/CuBe<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,68 mm... 1,70 mm<br />
HGW 2372 1,68 mm... 1,70 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
Series<br />
Thread<br />
Headstyle<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Due soldering the wire at the solder<br />
cup, the receptacle becomes vacuum<br />
tight.<br />
Please avoid that solder gets into the<br />
thread area of the receptacle.
Available Headstyles<br />
Head<br />
style<br />
D1 001 0,65 1,50 4,00 29,90 14,80<br />
D1 002 0,65 1,50 2,80 28,70 13,60<br />
D1 xxx<br />
Head<br />
No.<br />
D<br />
E<br />
C<br />
21,0<br />
Head<br />
ø<br />
mm<br />
2,5<br />
Plate<br />
ø<br />
mm<br />
ø A<br />
1015/G<br />
ø B<br />
ø 0,75<br />
ø 1,93<br />
ø 1,37<br />
M1,4<br />
Head<br />
Length<br />
mm<br />
A B C D E<br />
Dimensions and Mounting Measures<br />
Abmessungen und Einbaumaße<br />
24,5<br />
Total<br />
Length<br />
mm<br />
3,4<br />
Mounting<br />
Measure<br />
mm<br />
ø 1,85<br />
ø 1,67<br />
1015/G H 1015/GR-L<br />
H 1015/GR-L<br />
53<br />
Series 1015/G for position <strong>test</strong><br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 4,40 mm<br />
Recommended working travel 3,50 mm<br />
Pre-loaded spring force 0,25/0,40/0,40/0,30/0,70/0,60 N<br />
Spring force at working travel 0,70/1,00/1,50/1,70/2,50/3,00 N<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
How to order:<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill H 1015/GR<br />
HP 2361.1 (Trolitax) 1,68-1,70 mm<br />
HGW 2372 1,68-1,70 mm<br />
1015/G - D1001 - 1,5 N - Au - 0,65 x 4,0/1,5<br />
Series<br />
Thread<br />
Headstyle<br />
Head-No.<br />
Contact<br />
Pressure<br />
Plating<br />
Measure<br />
A<br />
Measure<br />
C<br />
SERIES 1015/G<br />
Measure<br />
B
SERIES 1021/G<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A 90°<br />
B 30°<br />
BST<br />
C<br />
D<br />
D<br />
D1 5,0<br />
F<br />
F<br />
F1<br />
5,0<br />
G 60°<br />
H 30°<br />
K 90°<br />
M<br />
Q<br />
35,8<br />
10,5<br />
27,5<br />
3<br />
2<br />
ø 1,0<br />
� 1,72<br />
ø 2,3<br />
ø 1,65<br />
M 1,6<br />
2,00 • Au/Ni<br />
0,80 • Au/Ni 1,00 • Au/Ni<br />
0,80 • Au/Ni<br />
1,30 • Au/Ni<br />
2,00 • Au/Ni<br />
1,80 • Au/Ni<br />
3,00 • Rh<br />
0,80 • Au 1,00 • Au<br />
1,30 • Au/Ni 1,80 • Ni<br />
0,65 • Au/Ni<br />
1,00 • Au/Ni<br />
1,50 • Au 2,00 • Au<br />
0,65 • Ni<br />
1,30 • Ni<br />
2,00 • Au/Ni<br />
1,80 • Au/Ni<br />
1,80 • Rh 2,00 • Rh<br />
2,00 • Rh<br />
1,80 • Rh<br />
1,00 • Ni 1,30 • Au/Ni<br />
1021/G H 1021/GR-L H 1021/GRV-L<br />
35,0<br />
54<br />
Series 1021/G with thread<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,30 mm<br />
Recommended working travel 4,00 mm<br />
Pre-loaded spring force 0,30/0,40/0,35/0,70/1,00/1,00 N<br />
Spring force at working travel 0,70/1,00/1,50/2,25/3,00/5,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1021/G - F - 1,5 N - Au - 2,0<br />
Due soldering the wire at the<br />
solder cup, the receptacle<br />
becomes vacuum tight.<br />
Please avoid that solder gets<br />
into the thread area of the<br />
receptacle.<br />
< 25 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,00 mm<br />
HGW 2372 2,03 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
Series<br />
Thread<br />
Dimensions and Mounting Measures<br />
Headstyle Contact<br />
Pressure Plating<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Head<br />
style<br />
D1 013 0,65 1,80 2,50 35,80 10,50<br />
D1 012 0,65 3,00 3,40 36,70 11,40<br />
D1 020 0,65 1,80 3,60 36,90 11,60<br />
D1 018 0,65 1,50 5,00 38,30 13,00<br />
D1 005 0,80 2,50 2,80 36,10 10,80<br />
D1 011 0,80 1,95 2,80 36,10 10,80<br />
D1 006 0,80 3,50 3,20 36,50 11,20<br />
D1 015 0,80 2,30 3,20 36,50 11,20<br />
D1 014 0,80 2,50 4,00 37,30 12,00<br />
D1 010 0,80 2,50 4,60 37,90 12,60<br />
D1 019 1,00 1,80 2,00 35,30 10,00<br />
D1 007 1,00 2,50 2,60 35,90 10,60<br />
D1 xxx<br />
D<br />
E<br />
C<br />
27,5<br />
A B C D E<br />
D7 017 0,65 1,50 2,70 36,00 10,70<br />
D7 xxx<br />
F1 021 0,70 1,80 2,00 35,30 10,00<br />
F1 008 1,00 2,30 3,30 36,60 11,30<br />
F1 009 1,00 2,50 3,50 36,80 11,50<br />
F1 001 1,30 2,50 3,00 36,30 11,00<br />
F1 xxx<br />
Head<br />
No.<br />
Head<br />
ø<br />
mm<br />
2,0<br />
2,7<br />
Plate<br />
ø<br />
mm<br />
F1 016 1,50 3,00 2,50 35,80 10,50<br />
ø A<br />
1021/G<br />
ø B<br />
ø 2,3<br />
ø 1,65<br />
M1,6<br />
Head<br />
Length<br />
mm<br />
Total<br />
Length<br />
mm<br />
Mounting<br />
Measure<br />
mm<br />
Dimensions Abmessungen and Mounting und Einbaumaße Measures<br />
H 1021/GR-L<br />
1021/G H 1021/GR-L<br />
55<br />
Series 1021/G for position <strong>test</strong><br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,30 mm<br />
Recommended working travel 4,00 mm<br />
Pre-loaded spring force 0,40/0,35/0,70/1,00/1,00 N<br />
Spring force at working travel 1,00/1,50/2,25/3,00/5,00 N<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 25 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,00 mm<br />
HGW 2372 2,03 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
1021/G - D1013 - 1,5 N - Au - 0,65 x 2,5/1,8<br />
Series<br />
Thread<br />
Headstyle<br />
Head-No. Contact<br />
Pressure<br />
Plating<br />
Measure<br />
A<br />
Measure<br />
C<br />
SERIES 1021/G<br />
Measure<br />
B
SERIES 1028/G<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
B<br />
BST<br />
C<br />
D<br />
D1<br />
EB<br />
G<br />
H<br />
V<br />
2,5<br />
60°<br />
30°<br />
30°<br />
1,80 • Ni<br />
1,30 • Rh<br />
0,80 • Ni/Au<br />
1,80 • Rh 2,50 • Rh<br />
1,40 • Au<br />
0,65 • Ni 0,80 • Ni<br />
1,80 • Au<br />
1,30 • Ni 1,50 • Rh<br />
1,40 • Au<br />
1,30 • Ni<br />
1028/G H 1021/GR-C H 1021/GR-L<br />
56<br />
Series 1028/G with thread<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,30 mm<br />
Recommended working travel 4,00 mm<br />
Pre-loaded spring force 0,30/0,40/0,35/0,75/1,00/1,00 N<br />
Spring force at working travel 0,70/1,00/1,50/2,25/3,00/5,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 25 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommende H 1021/GR<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,00 mm<br />
HGW 2372 2,03 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
1028/G - A - 1,5 N - Ni - 1,8<br />
Series<br />
Thread<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure Plating<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A 90°<br />
B 30°<br />
BA<br />
C<br />
C6<br />
D<br />
D<br />
D2<br />
D3<br />
F<br />
F<br />
F3<br />
28,5<br />
10,7<br />
20,0<br />
3<br />
2<br />
3<br />
5,0<br />
4,0<br />
5,0<br />
G 60°<br />
H 30°<br />
KF<br />
5,0<br />
ø 1,8<br />
� 3,0<br />
(ø 3,6)<br />
M 2<br />
2,50 • Ni 4,00 • Au<br />
1,80 • Rh/Ni<br />
1,80 • Ni<br />
2,30 • Rh/Ni<br />
3,00 • Ni<br />
3,50 • Ni<br />
1,00 • Rh<br />
3,00 • Ni<br />
1,80 • Ni<br />
2,30 • Rh<br />
3,00 • Au<br />
2,50 • Ni<br />
4,20 • Rh<br />
� 4,0<br />
(ø4,5)<br />
2,50 • Rh/Ni<br />
4,00 • Rh/Ni<br />
2,30 • Ni 2,50 • Ni<br />
0,80 • Rh 1,40 • Au<br />
2,50 • Rh<br />
4,00 • Rh<br />
1,00 • Rh 1,40 • Au<br />
2,30 • Rh<br />
4,00 • Au/Rh/Ni<br />
2,50 • Rh/Ni<br />
3,00 • Ni<br />
2,60 • Ni 4,00 • Ni<br />
� 5,0<br />
(ø 5,4)<br />
27,0<br />
0,2<br />
10,0<br />
1060/G<br />
1060/G4<br />
1060/G5<br />
H<br />
H<br />
1060/G-L<br />
H<br />
1060/GR-L H 1060/GRV-L<br />
57<br />
Series 1060/G with thread<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,50 mm<br />
Recommended working travel 4,40 mm<br />
Pre-loaded spring force 0,20/0,20/0,40/0,50/0,80/0,70 N<br />
Spring force at working travel 0,40/0,60/1,50/2,25/3,00/5,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 5,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1060/G - A - 1,5 N - Au - 4,0<br />
ø 3,2<br />
ø 3,0<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,00 mm<br />
HGW 2372 3,01 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
Series<br />
Thread<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Due soldering the<br />
wire at the solder<br />
cup, the receptacle<br />
becomes vacuum<br />
tight.<br />
Please avoid that<br />
solder gets into the<br />
thread area of the<br />
receptacle.<br />
SERIES 1060/G
SERIES 1060/G<br />
Available Headstyles<br />
Head Head Head Plate Head Total Mounting<br />
style No. ø ø Length Length Measure<br />
mm mm mm mm mm<br />
A B C D E<br />
D1 013 1,00 3,50 2,80 29,30 11,50<br />
D1 004 1,00 3,50 4,00 30,50 12,70<br />
D1 001 1,40 3,50 2,40 28,90 11,10<br />
D1 003 1,40 3,50 3,30 29,80 12,00<br />
D1 002 1,40 3,50 4,00 30,50 12,70<br />
D1 xxx<br />
F1 017 1,30 4,70 2,70 29,20 11,40<br />
F1 016 1,30 4,70 3,60 30,10 12,30<br />
F1 007 1,30 4,70 5,30 31,80 14,00<br />
F1 010 1,40 3,50 1,70 28,20 10,40<br />
F1 008 1,40 3,50 2,00 28,50 10,70<br />
F1 012 1,40 3,50 3,00 29,50 11,70<br />
F1 018 1,80 4,50 1,50 28,00 10,20<br />
F1 015 2,30 3,50 1,80 28,30 10,50<br />
F1 011 2,30 3,50 2,00 28,50 10,70<br />
F1 009 4,00 5,00 2,00 28,50 10,70<br />
F1 xxx<br />
D<br />
E<br />
C<br />
20,0<br />
2,0<br />
3,0<br />
ø A<br />
ø 2,65<br />
M2<br />
ø B<br />
ø 1,8<br />
(ø 3,6)<br />
Dimensions and Mounting Measures<br />
Abmessungen und Einbaumaße<br />
27,0<br />
10,0<br />
0,2<br />
1060/G H 1060/G-L H H 1060/GR-L<br />
58<br />
Series 1060/G for position <strong>test</strong><br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,50 mm<br />
Recommended working travel 4,40 mm<br />
Pre-loaded spring force 0,20/0,20/0,40/0,50/0,80/0,70 N<br />
Spring force at working travel 0,40/0,60/1,50/2,25/3,00/5,00 N<br />
Electrical<br />
max. current rating 5,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1060/G - D1013 - 1,5 N - Au - 1,00 x 2,8/3,5<br />
ø 3,2<br />
ø 3,0<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,00 mm<br />
HGW 2372 3,01 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
Series<br />
Thread<br />
Headstyle<br />
Head-No. Contact<br />
Pressure<br />
Plating<br />
Measure<br />
A<br />
Measure<br />
C<br />
Measure<br />
B
Available Headstyles<br />
Headstyles Diameter • Plating<br />
B<br />
BA<br />
30°<br />
1,80 • Ni<br />
1,80 • Rh<br />
1061/G 1060/G-L 1060/GR-L<br />
59<br />
Series 1061/G with thread<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 7,00 mm<br />
Recommended working travel 5,60 mm<br />
Pre-loaded spring force 0,15/0,25/0,40/0,60 N<br />
Spring force at working travel 0,70/0,80/1,50/3,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 5,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 35 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunge steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,00 mm<br />
HGW 2372 3,01 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
1061/G - B - 1,5 N - Ni - 1,8<br />
Series<br />
Thread<br />
Headstyle<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
SERIES 1061/G
SERIES 5110/G<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
D<br />
E<br />
F<br />
17,1<br />
7,3<br />
12,0<br />
1,6<br />
2,0<br />
ø 1,8<br />
� 3,0<br />
(ø 3,2)<br />
ø 2,65<br />
M2<br />
2,30C • Au 3,50C • Au<br />
2,30C • Au<br />
2,30C • Au<br />
2,30C • Au<br />
13,6<br />
0,2<br />
8,5<br />
ø 3,3<br />
ø 3,03<br />
ø 3,0<br />
ø 2,0<br />
5110/G H 5110/GR<br />
60<br />
Series 5110/G with thread<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 3,50 mm<br />
Recommended working travel 2,80 mm<br />
Pre-loaded spring force 0,25/0,30/0,45/0,50 N<br />
Spring force at working travel 0,80/1,20/1,50/2,50 N<br />
Electrical<br />
max. current rating 10,0 A<br />
Typ. continuity resistance<br />
Materials<br />
How to order:<br />
< 10 mOhm<br />
Barrel brass, gold plated<br />
Spring stainless steel, gold plated<br />
Plunger CuBe, gold plated<br />
Receptacle Messing, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,64 mm<br />
HGW 2372 2,65 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
5110/G - D - 1,5 N - Au - 2,3C<br />
Series<br />
Thread<br />
Headstyle<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Material:<br />
CuBe<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
Y4<br />
41,6<br />
10,5<br />
0,5 5,2<br />
27,5<br />
4,0<br />
2,0<br />
5,8<br />
ø1,5<br />
ø1,0<br />
P1,72<br />
ø2,3<br />
ø1,65<br />
M1,6<br />
ø0,7<br />
1,50x0,50 • Au<br />
ø0,45<br />
27,5<br />
33,0<br />
1021/GV view rotated 90° H 1021/GVR<br />
0,2<br />
61<br />
Series 1021/GV-Y4 turning secured<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 4,30 mm<br />
Recommended working travel 4,00 mm<br />
Pre-loaded spring force 0,30 N<br />
Spring force at working travel 1,50 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1021/GV - Y4 - 1,5 N - Au - 1,5x0,5<br />
ø2,2<br />
ø2,0<br />
ø1,7<br />
< 25 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated<br />
Receptacle brass, gold plated<br />
Recommended H 1021/GVR<br />
Diameterof Drill<br />
HP 2361.1 (Trolitax) 2,00 mm<br />
HGW 2372 (Hartglasgewebe) 2,03 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
Series<br />
Thread<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure Plating<br />
Tip<br />
width<br />
(mm)<br />
Tip<br />
strength<br />
(mm)<br />
SERIES 1021/GV
SERIES 2053<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
Y1<br />
Y21<br />
0,58<br />
0,50<br />
4,5<br />
4,5<br />
ø2<br />
ø2<br />
2,0x0,58 • Au<br />
2,0x0,50 • Au<br />
2053 H 1021 L<br />
62<br />
Series 2053<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Pre-loaded spring force 0,45 N<br />
Spring force at working travel 1,50 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,98...2,00 mm<br />
HGW 2372 1,98...2,00 mm<br />
How to order:<br />
2053 - Y1 - 1,5 N - Au - 2,0x0,58<br />
Series<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure Plating<br />
Tip<br />
width<br />
(mm)<br />
Tip<br />
strength<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
Y<br />
Y4<br />
Y3<br />
Y5<br />
1<br />
1<br />
0,5<br />
0,65<br />
with Headstyle<br />
Y und Y4<br />
4,5<br />
6<br />
5<br />
6<br />
ø5<br />
ø4<br />
ø5<br />
ø4<br />
5,00x1,00 • Au/Ni<br />
4,00x1,00 • Ni<br />
5,00x0,50 • Ni<br />
4,00x0,65 • Ni<br />
with Headstyle<br />
Y3 und Y5<br />
1053 1053 H 1050 L H 1050 L ST H 1050 W<br />
63<br />
Series 1053<br />
Mechanical<br />
Spacing 5,00 mm<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Pre-loaded spring force 0,50/0,80/1,25 N<br />
Spring force at working travel 1,50/3,00/5,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 5,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 20 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,00 mm<br />
HGW 2372 3,00 mm<br />
How to order:<br />
1053 - Y - 1,5 N - Ni - 5,0x1,0<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Plating<br />
Dimensions and Mounting Measures<br />
Tip<br />
width<br />
(mm)<br />
Tip<br />
strength<br />
(mm)<br />
SERIES 1053
SERIES 1053/G<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
Y<br />
Y3<br />
Y4<br />
42,5<br />
1,0<br />
0,5<br />
1,0<br />
9,0<br />
13,2<br />
4,9<br />
4<br />
2<br />
3,0<br />
ø5,0<br />
ø5,0<br />
ø4,0<br />
0,65<br />
Y5 ø4,0<br />
Y11<br />
0,65<br />
ø2,15<br />
ø2,15<br />
ø3,2<br />
ø2,65<br />
5,0x1,0C • Au<br />
5,0x0,5C • Au<br />
4,0x1,0C • Au<br />
4,0x0,65C • Au<br />
2,15x0,65C • Au<br />
SW 2,6<br />
M2,5<br />
ø1,35 0,85<br />
turning secured in receptacle only<br />
40,0<br />
12,0<br />
0,2<br />
ø3,2<br />
ø3,02<br />
1053/G view rotated 90° H 1053/GVRV-L H 1053/GRV-SEV<br />
64<br />
Series 1053/G<br />
turning secured in receptacle,<br />
optional: switching element<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel 2,50 mm<br />
(with switching element SEV)<br />
Pre-loaded spring force 0,30/0,40/0,50/0,80/0,80/1,00 N<br />
Spring force at working travel 0,50/1,50/2,00/3,00/4,00/5,00 N<br />
(± 20%)<br />
Spring force at working travel 1,50/2,50/3,00/4,00/5,00/6,00 N<br />
(with switching element SEV)<br />
(± 20%)<br />
Electrical<br />
max. current rating 5,0 A<br />
Typ. continuity resistance < 20 mOhm<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe, gold plated<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,01 mm<br />
HGW 2372 3,03 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
1053/G - Y4 - 1,5 N - Au - 4,0x0,65C<br />
Series<br />
47,8<br />
soldering<br />
hole<br />
ø2,55x1,6<br />
vacuum<br />
tight<br />
26,0<br />
ø2,8<br />
ø1,0<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
Plating<br />
Tip<br />
width<br />
(mm)<br />
switching element vacuum tight<br />
Tip<br />
strength<br />
(mm)<br />
Tip<br />
Material:<br />
CuBe
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A 90°<br />
C<br />
CL<br />
C1<br />
CL3<br />
F<br />
F<br />
F1<br />
ø 3,0<br />
CL1 ø 2,3<br />
ø 2,0<br />
36,0<br />
10,2<br />
3<br />
28,0<br />
2<br />
Y 1,7±0,2<br />
9,5<br />
9,5<br />
14,0<br />
*Temperature range of the insulator<br />
(HTK) up to +300°C<br />
ø 1,8<br />
ø 3,0<br />
42,5<br />
ø 2,65<br />
16,7<br />
9,5<br />
2,30 • Au<br />
2,30 • Au 4,00 • Au<br />
2,30 • Au<br />
1,00 • Au<br />
1,00 • Au<br />
1,00 • Au<br />
1,80 • Au<br />
2,30 • Au<br />
3,00 • HTK<br />
5,00 • HTK<br />
36,0<br />
18,2<br />
10,0<br />
4,00 • HTK<br />
42,5<br />
24,7<br />
0,2<br />
16,0<br />
Anschlusspin-ø<br />
ConnectorPin-ø Length Anschlusspin- of Con-<br />
X/mm nectorpinY/mmlänge<br />
Y/mm<br />
0,5<br />
6,0<br />
1,0 1,0<br />
2,5<br />
1,0<br />
4,0<br />
ø 3,2<br />
ø X<br />
H H 3010/S-23<br />
3010/2 3010/2-CL 3010/10 3010/10-CLH 3010/10-CL H 3010-16 H H 3010-22 3010/2G 3010/10G H H 3010/GS-26<br />
65<br />
Switching Probe 3010/2(G) • 3010/10(G)<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 1,70 mm 4,00 mm<br />
Pre-loaded spring force 0,12/0,30/1,80/1,70/ 2,70/ 5,00 N<br />
Spring force at switching travel 1,70 mm: 0,18/0,70/3,60/4,40/ 5,40/ 8,00 N<br />
(± 20%)<br />
4,00 mm: 0,25/1,30/6,00/8,00/ 9,00/12,00 N<br />
Spring force at working travel 1,70 mm: 1,25/2,30/7,00/9,00/10,00/13,00 N<br />
(± 20%)<br />
4,00 mm: 0,25/1,30/6,00/8,00/ 9,00/12,00 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 5,0 A 1,0 A<br />
Typ. continuity resistance < 15 mOhm < 50mOhm<br />
Insulating Voltage 1000V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated or<br />
gold plated with insulator<br />
Receptacle brass, gold plated<br />
Recommended<br />
Diameter of Drill<br />
H 3010-16/22/S-23 H 3010/GS-26<br />
HP 2361.1 (Trolitax) 3,00 mm 3,28 mm<br />
HGW 2372 3,01 mm 3,29 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
3010/2G - A - 2,3 N - Au - 2,3/1,0 x 4,0<br />
Series<br />
Body<br />
Extension<br />
ø 3,0<br />
22,0<br />
10,0<br />
Thread<br />
23,0<br />
Headstyle<br />
Contact<br />
Pressure<br />
� 3,0<br />
(ø 3,6)<br />
M3x0,35<br />
Plating<br />
26,2<br />
8,5<br />
Tip Diameter<br />
(mm)<br />
Dimensions and Mounting Measures<br />
ø 3,6<br />
ø 3,3<br />
ø 3,0<br />
Connector<br />
Pin Length<br />
Connector<br />
Pin-Diameter<br />
SERIES 3010/2(G) • 3010/10(G)
SERIES 3010/2GW(5)<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
C<br />
CL<br />
C1<br />
CL 1<br />
CL3<br />
F<br />
F<br />
F1<br />
ø 3,0<br />
ø 2,3<br />
ø 2,0<br />
36,0<br />
10,2<br />
28,0<br />
90°<br />
9,5<br />
2<br />
9,5<br />
3<br />
1,7±0,2<br />
4,0<br />
14,0<br />
2,30 • Au<br />
2,30 • Au 4,00 • Au<br />
2,30 • Au<br />
1,00 • Au<br />
1,00 • Au<br />
1,00 • Au<br />
1,80 • Au<br />
2,30 • Au<br />
3,00 • HTK<br />
5,00 • HTK<br />
Easy Replacement System<br />
Switching Contact 3010/2GW –<br />
interchangeable without soldering<br />
ø 1,8<br />
3,0 (ø 3,6)<br />
M3x0,35<br />
ø 2,65<br />
35,0<br />
8,5<br />
0,2<br />
4,0<br />
4,00 • HTK<br />
ø 3,6<br />
ø 3,3<br />
ø 3,0<br />
ø 1,0 7,5<br />
adjustable Einbauhöhe height by scre-<br />
3010/2GW H 3010/GW 3010/2GW5 H 3010/GW5 H 3010/GWR5<br />
wing 5mm range variabel 0-5,0 mm<br />
66<br />
Switching Probe 3010/2GW(5)<br />
with thread, adjustable height, easy replacement<br />
system, interchangeable without soldering<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 1,70 mm 4,00 mm<br />
Pre-loaded spring force 0,12/0,30/1,80/1,70/ 2,70/5,00 N<br />
Spring force at switching travel 1,70 mm: 0,18/0,70/3,60/4,40/ 5,40/ 8,00 N<br />
(± 20%)<br />
4,00 mm: 0,25/1,30/6,00/8,00/ 9,00/12,00 N<br />
Spring force at working travel 1,70 mm: 1,25/2,30/7,00/9,00/10,00/13,00 N<br />
(± 20%)<br />
4,00 mm: 0,25/1,30/6,00/8,00/ 9,00/12,00 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 5,0 A 1,0 A<br />
Typ. continuity resistance < 15 mOhm < 50 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated or<br />
gold plated with insulator<br />
Receptacle brass, gold plated<br />
Recommended H 3010/GW<br />
Diameter of Drill H 3010/GW5 H 3010/GWR5<br />
HP 2361.1 (Trolitax) 3,28 mm 3,31 mm<br />
HGW 2372 3,29 mm 3,32 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
3010/2GW5 - C - 1,3 N - Au - 2,3/SH4,0<br />
Series<br />
Body<br />
Extension<br />
Thread<br />
*Temperature Temperaturbelastbarkeit range of the des insulator<br />
(HTK) Isolierstückes up to +300°C aus HTK bis 300°C<br />
38,5<br />
Easychange<br />
Headstyle<br />
Adjustable<br />
Area<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
10,2...15,2<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
only at<br />
switching<br />
travel<br />
4,0 mm
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
CL1<br />
F1<br />
ø 2,3<br />
37,5<br />
10,2<br />
29,5<br />
2<br />
3<br />
Y<br />
9,5<br />
ø 1,8<br />
Ring<br />
ø 3,0<br />
ø 2,65<br />
ø X<br />
2,30 • Au<br />
1,00 • Au<br />
3,00 • HTK<br />
5,00 • HTK<br />
4,00 • HTK<br />
0,2<br />
16,0<br />
Connector Pin-ø Length of Con-<br />
X/mm nector PinY/mm<br />
Anschlusspin-ø 0,5 Anschlusspin- 6,0<br />
X/mm 1,0 länge 2,5Y/mm<br />
1,0 0,5<br />
4,0 6,0<br />
1,0<br />
2,5<br />
1,0<br />
4,0<br />
*Temperature range of the insulator<br />
(HTK) up to +300°C<br />
Temperaturbelastbarkeit des<br />
Isolierstückes aus HTK bis 300°C<br />
3010/2F 3010/2 F H 3010-16 H H 3010-22 H 3010/S-23<br />
67<br />
Switching Probe 3010/2F Type Opener<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 1,70 mm<br />
Pre-loaded spring force 0,40<br />
Spring force at switching travel<br />
(± 20%)<br />
1,00 N<br />
Spring force at working travel<br />
(± 20%)<br />
2,30 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 5,0 A 1,0 A<br />
Typ. continuity resistance < 15 mOhm < 50 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated or<br />
gold plated with insulator<br />
Receptacle brass, gold plated<br />
Recommended<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,00 mm<br />
HGW 2372 3,01 mm<br />
How to order:<br />
3010/2F - F - 2,3 N - Au - 2,3/1,0 x 4,0<br />
Series<br />
Body<br />
Extension<br />
ø 3,2<br />
ø 3,0<br />
Type<br />
Opener<br />
22,0<br />
10,0<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
23,0<br />
Plating Tip Diameter<br />
(mm)<br />
Connector<br />
Pin Length<br />
Connector<br />
Pin-Diameter<br />
SERIES 3010/2F
SERIES 3010/2V<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
Y<br />
Y5<br />
1,90x1,00 • Au<br />
4,00x0,65 • Au<br />
3010/2V H 3010-16 H 3010-22 H 3010/S-23<br />
68<br />
Switching Probe 3010/2V<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 1,70 mm<br />
Pre-loaded spring force 0,12/0,3/1,8/1,7/2,7/5,0 N<br />
Spring force at switching travel 0,18/0,7/3,6/4,4/5,4/8,0 N<br />
(± 20%)<br />
Spring force at working travel<br />
(± 20%)<br />
1,25/2,3/7,0/9,0/10,0/13,0 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 5,0 A 1,0 A<br />
Typ. continuity resistance < 15 mOhm < 50 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended H 3010-16/22/S-23<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,00 mm<br />
HGW 2372 3,01 mm<br />
How to order:<br />
3010/2V - Y - 2,3 N - Au - 1,9x1,0/1,0x4,0<br />
Series<br />
Body<br />
Extension<br />
Distortion<br />
safety<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
ConnectorPin-ø<br />
Length of Con-<br />
X/mm<br />
nectorpinY/mm<br />
0,5<br />
6,0<br />
1,0<br />
2,5<br />
1,0<br />
4,0<br />
*Temperature range of the insulator<br />
(HTK) up to +300°C<br />
Tip Diameter<br />
(mm)<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
turning<br />
secured<br />
Connector<br />
Pin-<br />
Diameter<br />
Connector<br />
Pin Length
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A 90°<br />
C<br />
CL<br />
C1<br />
CL1<br />
CL3<br />
F<br />
F<br />
F1<br />
36,0<br />
ø 3,0<br />
ø 2,3<br />
ø 2,0<br />
10,2<br />
28,0<br />
3<br />
2<br />
1,7±0,2<br />
8,8<br />
9,5<br />
9,5<br />
14,0<br />
ø 1,8<br />
� 3,0 (ø 3,6)<br />
ø 2,65<br />
M2,5<br />
ø 0,73<br />
2,30 • Au<br />
2,30 • Au 4,00 • Au<br />
2,30 • Au<br />
1,00 • Au<br />
1,00 • Au<br />
1,00 • Au<br />
1,80 • Au<br />
2,30 • Au<br />
3,00 • HTK<br />
5,00 • HTK<br />
Easy Replacement System<br />
Switching Contact 3011/2GS –<br />
interchangeable without soldering<br />
38,0<br />
12,0<br />
0,2<br />
1,7<br />
ø 3,2<br />
ø 2,5<br />
ø 1,8<br />
4,00 • HTK<br />
ø 3,02<br />
21,0<br />
Temperaturbelastbarkeit *Temperature range of des the insulator<br />
Isolierstückes (HTK) up to aus +300°C HTK: bis 300°C<br />
3011/2GS H 3011/GWR5 H 3011/R H 3011/K H 3011/RK HI HI 3011<br />
69<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 1,70 mm 4,00 mm<br />
Pre-loaded spring force 0,25/0,40/0,60/1,40/ 2,00/ 4,00 N<br />
Spring force at switching travel 1,70 mm:0,45/1,00/1,60/3,60/ 5,20/ 7,60 N<br />
(± 20%)<br />
4,00 mm:0,75/1,80/3,00/6,50/ 9,50/12,50 N<br />
Spring force at working travel 1,70 mm: 1,25/2,30/3,50/7,00/10,00/13,00 N<br />
(± 20%)<br />
4,00 mm:0,75/1,80/3,00/6,50/ 9,50/12,50 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 5,0 A 1,0 A<br />
Typ. continuity resistance < 15 mOhm < 50 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated or<br />
gold plated with insulator<br />
Receptacle brass, gold plated<br />
Recommended H 3011/GWR5<br />
Diameter of Drill H 3011/R, H 3011/RK H 3011/K<br />
HP 2361.1 (Trolitax) 3,02 mm 3,01 mm<br />
HGW 2372 3,04 mm 3,02 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
3011/2GS - C - 1,8 N - Au - 2,3/SH 4,0<br />
Series<br />
Body Thread<br />
Extension<br />
Headstyle<br />
Easy<br />
Replacement<br />
Dimensions and Mounting Measures<br />
Switching Probe 3011/2GS<br />
with thread, adjustable height, easy replacement<br />
system, interchangeable without soldering<br />
How to order:<br />
15,2<br />
4,2<br />
Contact<br />
Pressure<br />
ø 3,8<br />
10,2...15,2<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Switching<br />
Travel<br />
*Adjustable height by<br />
screwing range 0-5,0 mm<br />
SERIES 3011/2GS
SERIES 3012/2GS<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
C5<br />
F<br />
F1<br />
36,0<br />
10,2<br />
28,0<br />
5,0<br />
3<br />
2<br />
1,7±0,2<br />
8,8<br />
ø 2,27<br />
SW 2,5 (ø 3,2)<br />
ø 2,65<br />
M 2,5<br />
ø 0,73<br />
3,00C • Au 4,00C • Au<br />
1,00 • Au<br />
3,00C • Au<br />
4,50C • Au<br />
2,30 • HTK<br />
3,50 • HTK<br />
4,50 • HTK<br />
5,50 • HTK<br />
Easy Replacement System<br />
Switching Contact 3012/2GS –<br />
interchangeable without soldering<br />
38,0<br />
12,0<br />
0,2<br />
1,7<br />
4,00C • Au<br />
5,00C • Au<br />
3,00 • HTK<br />
4,00 • HTK<br />
5,00 • HTK<br />
ø 3,2<br />
ø 3,02<br />
ø 2,5<br />
ø 1,8<br />
21,0<br />
3012/2GS H 3011/GWR5 H H 3011/R H H 3011/K H 3011/RK HI 3011<br />
70<br />
Switching Probe 3012/2GS<br />
with thread/adjustable height/integrated mounting<br />
meachanism<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 4,20 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 1,70 mm or 4,00 mm<br />
Pre-loaded spring force 0,25/0,40/0,60/1,40/ 2,00/ 4,00 N<br />
Spring force at switching travel 1,70 mm: 0,45/1,00/1,60/3,60/ 5,20/ 7,60 N<br />
(± 20%)<br />
4,00 mm: 0,75/1,80/3,00/6,50/ 9,50/12,50 N<br />
Spring force at working travel 1,70 mm: 1,25/2,30/3,50/7,00/10,00/13,00 N<br />
(± 20%)<br />
4,00 mm: 0,75/1,80/3,00/6,50/ 9,50/12,50 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 5,0 A 1,0 A<br />
Typ. continuity resistance < 15 mOhm < 50 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe, gold plated or<br />
gold plated with insulator<br />
Receptacle brass, gold plated<br />
Recommended H 3011/GWR5<br />
Diameter of Drill H 3011/R, H 3011/RK H 3011/K<br />
HP 2361.1 (Trolitax) 3,02 mm 3,01 mm<br />
HGW 2372 3,04 mm 3,02 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
3012/2GS - F - 1,8 N - Au - 3,0C/SH4,0<br />
Series<br />
Body Thread<br />
Extension<br />
Headstyle<br />
Easy<br />
Replacement<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
15,2<br />
4,2<br />
ø 3,8<br />
*Temperature range of the insulator<br />
(HTK) up to +300°C view 90° rotated<br />
Plating<br />
10,2...15,2<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe<br />
Switching<br />
Travel<br />
adjustable height<br />
by screwing<br />
range 0-5,0 mm<br />
in H 3011/K and<br />
H 3011/RK
Available Headstyles<br />
Headstyles Diameter • Plating<br />
FS1<br />
FLS1<br />
36,0<br />
10,2<br />
28,0<br />
3<br />
2<br />
8,8 1,7 0,2<br />
ø 2,27<br />
ø 2,65<br />
ø 0,73<br />
9,5<br />
SW 2,5 (ø 3,2)<br />
M2,5<br />
3,00C<br />
4,00C<br />
5,00C<br />
5,90C<br />
Easy Replacement System<br />
Switching Contact 3012/2GS –<br />
interchangeable without soldering<br />
16,7<br />
42,5<br />
38,0<br />
3,50C<br />
4,50C<br />
5,50C<br />
3,00C 3,50C<br />
Structure of the Tip isolation<br />
12,0<br />
0,2<br />
1,7<br />
ø 3,2<br />
ø 3,02<br />
ø 2,5<br />
ø 1,8<br />
3012/2GS-FS1 3012/2GS-FLS1 H 3011/GWR5 H 3011/R H 3011/K H 3011/RK HI HI 3011<br />
21,0<br />
71<br />
Switching Probe 3012/2GS-FS1, FLS1<br />
with thread/adjustable height/integrated mounting<br />
meachanism/isolated Tip<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 4,50 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 1,70 mm or 4,00 mm<br />
Pre-loaded spring force<br />
0,12/0,25/0,30/0,40/0,60/1,80/1,40/1,70/2,00/2,70/2,00/5,00/4,00 N<br />
Spring force at switching travel (± 20%)<br />
1,70 mm: 0,20/0,45/0,75/1,00/1,60/3,60/3,60/4,40/4,80/5,40/5,20/8,00/7,60 N<br />
4,00 mm: 0,25/0,75/1,30/1,80/3,00/6,00/6,50/8,00/8,50/9,00/9,50/12,00/12,50 N<br />
Spring force at working travel (± 20%)<br />
1,70 mm: 0,75/1,25/1,80/2,30/3,50/6,50/7,00/8,50/9,00/9,50/10,00/12,50/13,00 N<br />
4,00 mm: 0,25/0,75/1,30/1,80/3,00/6,00/6,50/8,00/9,50/9,00/9,50/12,00/12,50 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 5,0 A 1,0 A<br />
Typ. continuity resistance < 15 mOhm < 50 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe, gold plated or<br />
Isolator plastic<br />
Plating CuBe<br />
Receptacle brass, gold plated<br />
Recommended H 3011/GWR5<br />
Diameter of Drill H 3011/R, H 3011/RK H 3011/K<br />
HP 2361.1 (Trolitax) 3,02 mm 3,01 mm<br />
HGW 2372 3,04 mm 3,02 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
3012/2GS - FS1 - 3,0 N - Au/CB - 3,0C/SH4,0<br />
Series<br />
Headstyle<br />
- Thread<br />
- Body Extension<br />
- Easy<br />
Replacement<br />
*Temperature range of the insulator<br />
(HTK) up to +300°C<br />
15,2<br />
Contact<br />
Pressure<br />
4,2<br />
Plating<br />
10,2...15,2<br />
ø 3,8<br />
- Tip Diameter<br />
(mm)<br />
- Tip Material:<br />
CuBe<br />
Dimensions and Mounting Measures view 90° rotated<br />
only at<br />
switching<br />
travel<br />
4,0 mm<br />
adjustable height<br />
by screwing<br />
range 0-5,0 mm<br />
in H 3011/K and<br />
H 3011/RK<br />
SERIES 3012/2GS-FS1
SERIES 3014/2G<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A 90°<br />
C<br />
C<br />
F<br />
F<br />
24,5<br />
9,2<br />
15,3<br />
1,7<br />
2,2<br />
2,4<br />
ø 1,8<br />
� 3,0<br />
(ø 3,5)<br />
M3x0,35<br />
ø 2,46<br />
ø 0,84<br />
ø 0,6<br />
3,00C • Au<br />
1,00C • Au<br />
2,00C • Au 3,00C • Au<br />
1,00C • Au<br />
Easy Replacement System<br />
Switching Contact 3014/2G –<br />
interchangeable without soldering<br />
2,00C • Au 3,00C • Au<br />
13,4<br />
8,0<br />
0,2<br />
ø 3,7<br />
ø 3,5<br />
ø 3,2<br />
19,5<br />
15,9<br />
3014/2G H 3014/GR H 3014/GWR<br />
72<br />
Switching Probe 3014/2G<br />
with thread, easy replacement system, interchangeable<br />
without soldering with H 3014/GWR<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 1,70 mm<br />
Pre-loaded spring force 0,50 N<br />
Spring force at switching travel 0,90 N<br />
Spring force at working travel 1,50 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 3,0 A 1,0 A<br />
Typ. continuity resistance < 20 mOhm < 40 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe<br />
Receptacle brass, gold plated<br />
Recommended<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,50 mm<br />
HGW 2372 3,51 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
3014/2G - A - 1,5 N - Au - 3,0 C<br />
Series<br />
Body<br />
Extension<br />
Thread<br />
ø 3,0<br />
ø 2,6<br />
ø 2,0<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
*Temperature range of<br />
the insulator (HTK)<br />
up to +300°C<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
F<br />
F<br />
F1<br />
35,3<br />
9,5<br />
28,0<br />
2<br />
2<br />
4,0 2,6±0,2<br />
ø0,8<br />
ø2,0<br />
ø1,65<br />
ø0,68<br />
1,50 • Au 3,00 • Au<br />
0,80 • Au<br />
1,50 • Au<br />
1,50 • HTK<br />
16,0<br />
0,2<br />
ø2,2<br />
ø2,0<br />
26,0<br />
73<br />
Switching Probe 3020•3020/2G<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,30 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 2,60 mm 4,00 mm<br />
Pre-loaded spring force 0,15/0,4/0,5/1,7 N 0,15/0,4/0,5/1,7 N<br />
Spring force at switching travel<br />
(± 20%)<br />
0,25/0,8/1,8/4,5 N 0,3/1,0/2,5/6,0 N<br />
Spring force at working travel<br />
(± 20%)<br />
0,8/1,5/3,0/6,5 N 0,3/1,0/2,5/6,0 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 3,0 A 1,0 A<br />
Typ. continuity resistance < 20 mOhm < 50 mOhm<br />
Insulating voltage 1000 V 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated or<br />
gold plated with insulator<br />
Receptacle brass, gold plated<br />
Recommended H 3020(/S-26) H 3020/GS-26<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,00 mm 2,15 mm<br />
HGW 2372 2,01 mm 2,16 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
3020/2G - F - 1,5 N - Au - 1,5/SH 4,0<br />
2<br />
Thread<br />
Body<br />
Extension<br />
�1,72<br />
ø2,3<br />
M2<br />
26,0<br />
8,5<br />
0,2<br />
ø2,35<br />
ø2,15<br />
ø2,0<br />
3020 H 3020 H 3020/S-26 H 3020/2G H 3020/GS-26<br />
Series<br />
Dimensions and Mounting Measures<br />
Headstyle Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
*Temperature range of<br />
the insulator (HTK)<br />
up to +300°C<br />
Switching<br />
travel<br />
SERIES 3020 • 3020/2G
SERIES 3023/2GS<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
C<br />
D<br />
F<br />
F<br />
F1<br />
43,5<br />
10,4<br />
35,3<br />
2<br />
1,5±0,2 3<br />
7,1<br />
90°<br />
ø 1,0<br />
1,72<br />
ø 2,3<br />
ø 1,65<br />
M1,6<br />
ø 0,45<br />
1,80 • Au<br />
1,80 • Au<br />
1,00 • Au<br />
1,00 • Au<br />
1,80 • Au<br />
1,80 • HTK<br />
Easy Replacement System<br />
Switching Contact 3023/2G –<br />
interchangeable without soldering<br />
42,9<br />
15,0<br />
0,2<br />
ø 1,4<br />
ø 2,2<br />
ø 2,0<br />
30,3<br />
10,2<br />
0,2<br />
3023/2GS H 3023/GWR5<br />
H<br />
3023/G<br />
H<br />
3023/5G HI HI 3023 3023<br />
ø 2,2<br />
ø 2,0<br />
74<br />
Switching Probe 3023/2GS<br />
with thread, easy replacement system, interchangeable<br />
without soldering<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 1,50 mm<br />
Pre-loaded spring force 0,12/0,30/0,50/0,80 N<br />
Spring force at switching travel<br />
(± 20%)<br />
0,20/0,50/0,80/1,60 N<br />
Spring force at working travel<br />
(± 20%)<br />
0,85/1,35/2,00/3,50 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 3,0 A 1,0 A<br />
Typ. continuity resistance < 20 mOhm < 50 mOhm<br />
Insulating voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated or<br />
gold plated with insulator<br />
Receptacle brass, gold plated<br />
Recommended<br />
Diameterof Drill<br />
HP 2361.1 (Trolitax) 2,00 mm<br />
HGW 2372 (Hartglasgewebe) 2,01 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
3023/2GS - F - 3,5 N - Au - 1,8<br />
Series<br />
Body Thread<br />
Extension<br />
Headstyle<br />
Contact<br />
Easy<br />
Pressure<br />
replacement<br />
Dimensions and Mounting Measures<br />
30,3<br />
5<br />
23,2<br />
0,2<br />
ø 3,2<br />
ø 2,8<br />
Plating<br />
10,4...15,4<br />
Tip Diameter<br />
(mm)<br />
*Temperature<br />
range of the<br />
insulator (HTK)<br />
up to +300°C<br />
*Adjustable height by<br />
screwing range 0-5,0 mm
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
D<br />
F<br />
F1<br />
24,5<br />
9,2<br />
15,3<br />
2,2 1,7<br />
2,4<br />
ø 1,0<br />
(ø 2,3)<br />
M2x0,25<br />
ø 1,65<br />
ø 0,7<br />
ø 0,52<br />
1,80C • Au<br />
1,00C • Au<br />
1,00C • Au<br />
1,80 • HTK<br />
Easy Replacement System<br />
Switching Contact 3024/2G –<br />
interchangeable without soldering<br />
1,72<br />
13,0<br />
8,0<br />
0,2<br />
ø 2,35<br />
ø 2,15<br />
ø 2,0<br />
3024/2G H 3024/G H 3024/GW<br />
3024/2G H 3024/2G H 3024/2GW<br />
75<br />
Switching Probe 3024/2G<br />
with thread, easy replacement system, interchangeable<br />
without soldering with H 3024/GW<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 2,60 mm<br />
Pre-loaded spring force 0,30/0,50/0,50 N<br />
Spring force at switching travel<br />
(± 20%)<br />
1,00/1,50/1,80 N<br />
Spring force at working travel<br />
(± 20%)<br />
1,35/2,00/2,50 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 3,0 A 1,0 A<br />
Typ. continuity resistance < 20 mOhm < 50 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe, gold plated or<br />
gold plated with insulator<br />
Receptacle brass, gold plated<br />
Recommended<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,15 mm<br />
HGW 2372 2,16 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
3024/2G - C - 2,0 N - Au - 1,8 C<br />
Series<br />
Body<br />
Extension<br />
Thread<br />
Dimensions and Mounting Measures<br />
19,5<br />
Headstyle Contact<br />
Pressure<br />
ø 1,8<br />
ø 1,4<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
*Temperature range of<br />
the insulator (HTK)<br />
up to +300°C<br />
Tip Material:<br />
CuBe<br />
SERIES 3024/2G
SERIES 3020/2GW5<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
F<br />
F<br />
F1<br />
35,3<br />
9,5<br />
28,0<br />
2,0<br />
2,0<br />
7,0 2,6±0,2<br />
1,50 • Au 3,00 • Au<br />
0,80 • Au<br />
1,50 • Au<br />
1,50 • HTK<br />
Switching Contact 3020/2GW5 –<br />
interchangeable without soldering<br />
For replacement of standard switching contacts in <strong>test</strong><br />
modules for <strong>test</strong>ing harnesses of the automotive industry,<br />
in case of maintenance you have a to remove the complete<br />
module from the <strong>test</strong> table, to loose the wire and<br />
solder it again.<br />
The new PTR-System reduces the time for maintenance<br />
considerable. The switching contact and the receptacle<br />
are equiped with a special designed pin and a socket<br />
inside of the receptacle. The wire can be soldered directly<br />
at the connector pin of the receptacle – once wired it<br />
must not be removed. The switching contact can be replaced<br />
inside the receptacle without loose the wire again.<br />
ø0,8<br />
1,72<br />
ø2,3<br />
M2x0,25<br />
ø1,65<br />
37,9<br />
8,5<br />
0,2<br />
4,0<br />
ø2,35<br />
ø2,15<br />
ø2,0<br />
ø0,7<br />
3020/2GW5 H 3020/GW5 H 3020/GWR5<br />
76<br />
Switching Probe 3020/2GW5<br />
with thread, threaded switching probe for easy<br />
replacement – without wiring<br />
Mechanical<br />
Spacing 2,54 mm/100mil<br />
Full travel 5,30 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 2,60 mm 4,00 mm<br />
Pre-loaded spring force 0,15/0,4/0,5/1,7 N 0,15/0,4/0,5/1,7 N<br />
Spring force at switching travel<br />
(± 20%)<br />
0,25/0,8/1,8/4,5 N 0,3 /1,0/2,5/6,0 N<br />
Spring force at working travel<br />
(± 20%)<br />
0,8 /1,5/3,0/6,5 N 0,3 /1,0/2,5/6,0 N<br />
Electrical Recaptacle<br />
Plunger<br />
Pin-Plunger<br />
max. current rating<br />
Typ. continuity resistance<br />
3,0 A<br />
< 20 mOhm<br />
1,0 A<br />
< 50 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated or<br />
gold plated with insulator<br />
Receptacle brass, gold plated<br />
Recommended<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,15 mm<br />
HGW 2372 2,16 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
3020/2GW5 - F - 1,5 N - Au - 1,5<br />
Series<br />
Thread<br />
easychange<br />
Adjustable<br />
Area<br />
Dimensions and Mounting Measures<br />
Headstyle<br />
Contact<br />
Pressure<br />
9,5...14,5<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
*Temperature range of the<br />
insulator (HTK) up to +300°C<br />
*Adjustable height<br />
by screwing range<br />
0-5,0 mm
Available Headstyles<br />
Headstyles Diameter • Plating<br />
Y<br />
0,5 3,0<br />
4,5<br />
Abmessungen und<br />
Einbaumaße *Temperature range of<br />
7,5<br />
FK 3028.01<br />
the insulator (HTK)<br />
Single Verrastnadel, probe einfach<br />
Temperaturbelastbarkeit up to +300°C<br />
des<br />
Isolierstückes aus HTK bis 300°<br />
ø 0,68<br />
4,0<br />
ø 1,65<br />
21,8<br />
1,50x0,50 • Au<br />
ø 1,96<br />
ø 0,7<br />
M1,6<br />
M1,6<br />
ø 2,1<br />
24,7<br />
61,5<br />
ø 1,75<br />
42,4<br />
0,3<br />
ø 2,3<br />
ø 2,3<br />
77<br />
Push Back Probe 3028.01<br />
turning security, vacuum closely<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 2,60 mm<br />
Pre-loaded spring force 1,00/ 2,20/ 4,00 N<br />
Spring force at switching travel 3,10/ 6,80/10,70 N<br />
Spring force at working travel 5,00/10,00/15,00 N<br />
Electrical Receptacle-Plunger Pin-Plunger<br />
max. current rating 3,0 A 1,0 A<br />
Typ. continuity resistance < 20 mOhm < 50 mOhm<br />
Insulating voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,10 mm<br />
HGW 2372 2,11 mm<br />
Screwing tool WFS 1021/G - 2,54 - 1,8<br />
max. recommended torques 5,00 Ncm<br />
How to order:<br />
3028.01 - Y - 15,0 N - Au - 1,5 x 0,5<br />
� 1,72<br />
ø 1,0<br />
Series<br />
12,5<br />
17,5<br />
17,8<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
H 3028/R.01<br />
Receptacle Führungshülse<br />
SE 3028.01<br />
Switching Schaltelement element<br />
Plating<br />
FK FK 3028.01<br />
Probe Verrastnadel, complete with komplett mit<br />
receptacle and switching<br />
element Hülse + Schaltelement<br />
Tip<br />
Diameter<br />
(mm)<br />
Tip<br />
strength<br />
(mm)<br />
SERIES 3028.01
SERIES 3030<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
D<br />
F<br />
1,00 • Au<br />
0,65 • Au<br />
1,00 • Au<br />
3030 H 1025 C (U)<br />
78<br />
Switching Probe 3030<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 6,30 mm<br />
Recommended working travel 5,00 mm<br />
Switching travel (± 0,2mm) 4,00 mm<br />
Pre-loaded spring force 0,30 N<br />
Spring force at switching travel 1,00 N<br />
Spring force at working travel 2,00 N<br />
Electrical Pin-Plunger<br />
max. current rating 1,0 A<br />
Typ. continuity resistance < 50 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel, gold plated<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,65 mm<br />
with inserted press ring 1,75 mm<br />
HGW 2372 1,67 mm<br />
with inserted press ring 1,76 mm<br />
How to order:<br />
3030 - C - 2,0 N - Au - 1,0/0,5 x 4,0<br />
Series<br />
Headstyle<br />
*Temperature range of<br />
the insulator (HTK)<br />
up to +300°C<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Connector<br />
Pin Connector<br />
Diameter Pin Length
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
F<br />
27,5<br />
9,3<br />
1,5<br />
20,0<br />
2,5<br />
ø 0,65<br />
ø 1,0<br />
ø 0,38<br />
0,80C • Au<br />
0,80C • Au<br />
18,0<br />
0,8<br />
3035 H 3035<br />
ø 1,41<br />
ø 1,31<br />
79<br />
Switching Probe 3035<br />
How to order:<br />
3035 - F - 2,0 N - Au - 0,8C<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
*Temperature range of<br />
the insulator (HTK)<br />
up to +300°C<br />
Mechanical<br />
Spacing 1,91 mm/75 mil<br />
Full travel 5,00 mm<br />
Recommended working travel 4,00 mm<br />
Switching travel (± 0,2mm) 2,60 mm<br />
Pre-loaded spring force 0,30 N<br />
Spring force at switching travel 1,10 N<br />
(± 20%)<br />
Spring force at working travel<br />
(± 20%)<br />
Electrical<br />
2,00 N<br />
max. current rating 1,0 A<br />
Typ. continuity resistance < 20 mOhm<br />
Insulating Voltage 1000 V<br />
Materials<br />
Barrel bronze, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe, gold plated<br />
Receptacle bronze, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,30 mm<br />
with inserted press ring 1,36 mm<br />
HGW 2372 1,32 mm<br />
with inserted press ring 1,37 mm<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe<br />
SERIES 3035
SERIES 5087<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
D<br />
D5<br />
F<br />
F5<br />
FL<br />
F<br />
7,5<br />
7,5<br />
10<br />
2,30 • Au 3,00 • Au<br />
1,45 • Au<br />
1,80 • Au<br />
3,00 • Au<br />
1,00 • Au<br />
1,40 • Au<br />
1,80 • Au<br />
1,30 • Au<br />
1,80 • Au<br />
2,30 • Au<br />
1,10 • Au<br />
80<br />
Push Back Probe 5087<br />
Mechanical „L“<br />
Spacing 4,00 mm<br />
Full travel 10,00 mm 6,00 mm<br />
Recommended working travel 9,50 mm 5,00 mm<br />
Switching travel (± 0,2mm) 7,50 mm 3,00 mm<br />
Pre-loaded spring force 1,5/2,0/ 4,0 N 3,0/ 6,0/10,5 N<br />
Spring force at switching travel 4,3/6,8/12,7 N 6,6/10,8/16,2 N<br />
Spring force at working travel 6,0/9,0/15,0 N<br />
(± 20%)<br />
9,0/15,0/20,0 N<br />
Electrical Recaptacle to Plunger Pin to Plunger<br />
max. current rating 20,0 A 1,0 A<br />
Typ. continuity resistance < 3 mOhm < 25 mOhm<br />
Insulating voltage 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe/steel<br />
Recommended Diameter of Drill<br />
3,00 mm (Tolerances depend to material, trial drillings recommended)<br />
How to order:<br />
5087 - F - 15 N - Au - 1,8 C/ 1,0 x 4,0<br />
Series<br />
Headstyle<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Plating<br />
Tip<br />
width<br />
(mm)<br />
*Temperature range of<br />
the insulator (HTK)<br />
up to +300°C<br />
Tip<br />
strength<br />
(mm)<br />
ConnectorPin-ø Length of Con-<br />
X/mm nectorpinY/mm<br />
0,5<br />
6,0<br />
1,0<br />
2,5<br />
1,0<br />
4,0<br />
Connector<br />
Pin Length
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A<br />
C<br />
F<br />
Y<br />
Y<br />
Y1<br />
1,6<br />
0,8<br />
0,8<br />
2,2<br />
2,5<br />
3<br />
3,00 • Au<br />
3,00 • Au<br />
1,80 • Au<br />
2,20x1,60 • Au<br />
2,50x0,80 • Au<br />
3,00x0,80 • Au<br />
Also available in vacuum tight version = SEV<br />
Dimensions and Mounting Measures<br />
ConnectorPin-ø Length of Con- *Temperature range of<br />
X/mm nectorpinY/mm the insulator (HTK)<br />
0,5<br />
6,0 up to +300°C<br />
0,7<br />
7,0<br />
1,0<br />
2,5<br />
1,0<br />
4,0<br />
81<br />
Push Back Probe 5104<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 7,00 mm<br />
Recommended working travel 5,00 mm<br />
Switching travel (± 0,2mm) 3,50 mm<br />
Pre-loaded spring force 0,50/1,50/ 3,00/ 5,00 /4,00 N<br />
Spring force at switching travel 0,70/4,65/11,40/15,50/18,70 N<br />
(± 20%)<br />
Spring force at working travel 1,50/6,75/15,75/20,75/25,75 N<br />
(± 20%)<br />
(without Switching element) 0,75/6,00/15,00/20,00/25,00 N<br />
Electrical Recaptacle to Plunger Pin to Plunger<br />
max. current rating 20,0 A 1,0 A<br />
Typ. continuity resistance < 3 mOhm < 30mOhm<br />
Insulating voltage 1000 V 1000 V<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
3,50 mm (Tolerances depend to material, trial drillings recommended)<br />
How to order:<br />
5104 - Y - 15,75 N - Au - 2,2x1,6/1,0 x 4,0<br />
Series<br />
Headstyle<br />
Contact<br />
Pressure<br />
Plating<br />
5104 Single probe<br />
H 5104<br />
5104/SE<br />
Tip<br />
width<br />
(mm)<br />
H 5104/SE<br />
Tip<br />
Connector<br />
strength<br />
Pin Diameter<br />
(mm)<br />
Receptacle<br />
(not for switching element)<br />
Probe with receptacle<br />
and switching element<br />
Receptacle for<br />
switching element<br />
SERIES 5104<br />
Connector<br />
Pin Length
SERIES 5203<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
Y<br />
1,90x0,30 • Au<br />
1,90x0,50 • Au<br />
5203 H 5203<br />
82<br />
Push Back Probe 5203<br />
Mechanical<br />
Spacing 2,54 mm<br />
Full travel 5,50 mm<br />
Recommended working trave 5,00 mm<br />
Pre-loaded spring force 2,0 N<br />
Spring force at working travel 10,0/15,0 N<br />
(± 20%)<br />
Electrical<br />
max. current rating<br />
Materials<br />
How to order:<br />
< 5,0 A<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe, gold plated<br />
Receptacle brass, gold plated<br />
5203 - Y - 10,0 N - Au - 1,9 x 0,3C<br />
Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Required screwing-tool:<br />
WFS 5203<br />
Plating<br />
Tip<br />
width<br />
(mm)<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe
Available Headstyles<br />
Headstyles Diameter • Plating<br />
CX<br />
DX<br />
FX<br />
HX 30°<br />
32,3<br />
10,5<br />
24,0<br />
3<br />
2<br />
ø 1,0<br />
ø 2,0<br />
ø 1,65<br />
30,0<br />
2,00C • Au<br />
1,00C • Au<br />
1,00C • Au<br />
1,40C • Au<br />
Test Conditions to Specify the max. current rating:<br />
- Test probe will be pulsed with raising current up to<br />
constant heating of max. 45 K<br />
(according to VDE 0609)<br />
- Test probe and <strong>test</strong> piece are free of dirt<br />
- Test probe is regulary mounted in corresponding<br />
receptacle<br />
8,0<br />
0,2<br />
ø 2,2<br />
ø 2,0<br />
35,8<br />
27,5<br />
� 1,72<br />
ø 2,3<br />
M 1,6<br />
1021 1021-...X - ...X H 1021 L L 1021/G 1021/G-...X - ...X H 1021/GR-L 1021/GR - L H 1021/GRV-L H 1021/GRV-L<br />
83<br />
High Current Probe 1021 • 1021/G<br />
Mechanical<br />
Spacing 2,54 mm/100 mil<br />
Full travel 5,30 mm<br />
Recommended working travel 4,00 mm<br />
Pre-loaded spring force 1,00 N<br />
Spring force at working travel 3,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 16,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1021/G - C X - 3,0 N - Au - 2,0 C<br />
33,0<br />
Gewindeausführung<br />
10,0<br />
ø 2,01<br />
35,0<br />
< 10 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe, gold plated<br />
Receptacle brass, gold plated<br />
Recommended H 1021 L H 1021/GR-L<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 1,98-2,00 mm 2,00 mm<br />
HGW 2372 1,98-2,01 mm 2,03 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
Series<br />
Headstyle<br />
High<br />
Current<br />
Type<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Due soldering the<br />
wire at the solder<br />
cup, the receptacle<br />
becomes vacuum<br />
tight.<br />
Please avoid that<br />
solder gets into the<br />
thread area of the<br />
receptacle.<br />
Tip Material:<br />
CuBe<br />
SERIES 1021 • 1021/G
SERIES 1060 • 1060/G<br />
Available Headstyles<br />
Headstyles<br />
BAX<br />
CX<br />
DX<br />
FX<br />
HX<br />
27,5<br />
10,7<br />
19,0<br />
3,0<br />
2,0<br />
30°<br />
ø 1,8<br />
ø 3,0<br />
ø 2,65<br />
26,0<br />
Diameter • Plating<br />
1,80C • Au<br />
3,00C • Au 4,00C • Au<br />
2,30C • Au 3,00C • Au<br />
2,30C • Au<br />
6,00C • Au<br />
1,80C • Au<br />
ø 3,2<br />
4,00C • Au<br />
Test Conditions to Specify the max. current rating:<br />
- Test probe will be pulsed with raising current up to<br />
constant heating of max. 45 K<br />
(according to VDE 0609)<br />
- Test probe and <strong>test</strong> piece are free of dirt<br />
- Test probe is regulary mounted in corresponding<br />
receptacle<br />
10,0<br />
0,4<br />
ø 3,0<br />
28,0<br />
10,7<br />
19,5<br />
3,0<br />
2,0<br />
3,0<br />
1060-...X H 1050 L 1060/G-...X H 1060/G-L H 1060/GRV-L<br />
84<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 5,50 mm<br />
Recommended working travel 4,40 mm<br />
Pre-loaded spring force 0,70 N<br />
Spring force at working travel 3,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 24,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1060/G - F X - 3,0 N - Au - 4,0 C<br />
ø 1,8<br />
� 3,0<br />
(ø 3,6)<br />
ø 2,65<br />
M2<br />
27,0<br />
10,0<br />
0,4<br />
ø 3,2<br />
ø 3,0<br />
< 5 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe<br />
Receptacle brass, gold plated<br />
Recommended Diameter H 1050 L<br />
of Drill H 1060/G-L H 1060/GRV-L<br />
HP 2361.1 (Trolitax) 3,00 mm 3,00 mm<br />
HGW 2372 3,00 mm 3,01 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
Series<br />
Thread<br />
Headstyle<br />
High<br />
Current<br />
Type<br />
Dimensions and Mounting Measures<br />
High Current Probe 1060 • 1060/G<br />
How to order:<br />
Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe<br />
Due soldering the<br />
wire at the solder<br />
cup, the receptacle<br />
becomes vacuum<br />
tight.<br />
Please avoid that<br />
solder gets into the<br />
thread area of the<br />
receptacle.
Available Headstyles<br />
Headstyles Diameter • Plating<br />
AX 90°<br />
CX<br />
FX<br />
38,5<br />
10,8<br />
3,0<br />
30,0<br />
2,0<br />
ø 2,5<br />
ø 4,0<br />
ø 3,5<br />
4,00C • Au<br />
3,00C • Au 4,00C • Au<br />
4,00C • Au<br />
Test Conditions to Specify the max. current rating:<br />
- Test probe will be pulsed with raising current up to<br />
constant heating of max. 45 K<br />
(according to VDE 0609)<br />
- Test probe and <strong>test</strong> piece are free of dirt<br />
- Test probe is regulary mounted in corresponding<br />
receptacle<br />
40,0<br />
0,3<br />
15,0<br />
8,0<br />
ø 4,3<br />
ø 4,0<br />
85<br />
High Current Probe 1075 • 1075/G<br />
Mechanical<br />
Spacing 4,50/5,00 mm<br />
Full travel 5,50 mm<br />
Recommended working travel 4,40 mm<br />
Pre-loaded spring force 1,50/1,50 N<br />
Spring force at working travel 3,00/5,00 N<br />
(± 20%)<br />
Electrical<br />
max. current rating 50,0 A<br />
Typ. continuity resistance<br />
Materials<br />
1075/G - F X - 3,0 N - Au - 4,0 C<br />
43,1<br />
34,6<br />
< 2 mOhm<br />
Barrel brass, gold plated<br />
Spring stainless steel, silver<br />
Plunger CuBe, gold plated<br />
Receptacle brass, gold plated<br />
Recommended with without<br />
Diameter of Drill receptacle receptacle<br />
HP 2361.1 (Trolitax) 3,98..3,99 mm 3,49..3,50 mm<br />
Screwing Tools and Recommended Torques – see page 94/95<br />
How to order:<br />
M3<br />
3,5 (ø 4,3)<br />
1075-...X H 1075 L 1075/G H1075/G-L<br />
Series<br />
Thread<br />
Headstyle<br />
High Contact<br />
Current Pressure<br />
Type<br />
Dimensions and Mounting Measures<br />
Plating<br />
43,0<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe<br />
SERIES 1075
SERIES 4004/G<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
BST1<br />
C<br />
G<br />
V<br />
60°<br />
1,50 • Rh<br />
2,50 • Rh<br />
1,30 • Rh<br />
1,00 • Rh<br />
The special construction of the FK 4004/G reduces time<br />
and costs of service and maintenance. The wire and<br />
tube will be connected directly to the receptacle.<br />
As the receptacle is wear resistant the wire and tube<br />
must not be disconnected again. The pneumatic part<br />
itself is interchangeable and will be screwed into the<br />
receptacle. An o-ring seals the pneumatic insert and<br />
the receptacle and makes both a functioning unit.<br />
The Pneumatic Probe 4004/G<br />
only operates in combination<br />
with receptacle H4004/GR...<br />
Pneumatik accessories see page 89<br />
4004/G H 4004/GR H 4004/GR(L) L 4000<br />
86<br />
Mechanical<br />
Spacing 4,00 mm<br />
Full travel 10,00 mm<br />
Recommended working travel 6,00 mm<br />
Spring force at working travel 0,60 N<br />
(± 20%)<br />
Operating pressure 6 bar<br />
with thread<br />
Operating medium compressed air (filtered, free of oil)<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,40 mm<br />
HGW 2372 3,41 mm<br />
How to order:<br />
4004/G - BST1 - 0,6 N - Rh - 1,5<br />
Series<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Pneumatic Probe 4004/G<br />
Contact<br />
Pressure<br />
Required screwing-tool:<br />
WFS 1060/G-4,0-3,0<br />
Plating<br />
Tip Diameter<br />
(mm)
Available Headstyles<br />
Headstyles Diameter • Plating<br />
4004<br />
A<br />
BST1<br />
G<br />
4005<br />
BST1<br />
C<br />
G<br />
4006<br />
BST1<br />
C<br />
G<br />
V<br />
60°<br />
60°<br />
60°<br />
60°<br />
3,00 • Rh<br />
2,00 • Rh<br />
1,30 • Rh<br />
1,50 • Rh<br />
2,50 • Rh<br />
1,30 • Rh<br />
1,50 • Rh<br />
2,50 • Rh<br />
1,30 • Rh<br />
1,00 • Rh<br />
Pneumatik accessories see page 89<br />
4004 H 4004 4005 H 4005 4006 H 4006 ...-L L 4000<br />
87<br />
Series 4004 • 4005 • 4006<br />
Mechanical FK 4004 FK 4005 FK 4006<br />
Spacing 4,00 mm 3,50 mm 3,00 mm*<br />
Full travel 10,00 mm 10,00 mm 10,00 mm<br />
Recommended working travel 6,00 mm 6,00 mm 6,00 mm<br />
Spring force at working travel<br />
(± 20%)<br />
1,50 N 0,80 N 0,60 N<br />
Operating pressure 6 bar<br />
Operating medium compressed air (filtered, free of oil)<br />
* without receptacle = 2,54 mm<br />
Electrical<br />
max. current rating 3,0 A<br />
Typ. continuity resistance<br />
Materials<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,40 mm 3,00 mm 2,40 mm<br />
HGW 2372 3,41 mm 3,01 mm 2,41 mm<br />
How to order:<br />
4004 - BST1 - 1,6 N - Rh - 2,0 (L)<br />
Series<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure<br />
Plating<br />
for Connection<br />
of L 4000<br />
Tip Diameter<br />
(mm)<br />
SERIES 4004 • 4005 • 4006
SERIES 4034<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
A 90°<br />
BST1<br />
G 60°<br />
56,5<br />
5,9<br />
9,0<br />
ø3,2<br />
ø3,0<br />
ø1,6<br />
27,5<br />
11,0<br />
3,00 • Au<br />
2,00 • Rh<br />
1,30 • Rh<br />
Pneumatik accessories see page 89<br />
0,4<br />
ø3,6<br />
ø3,4<br />
4034 H 4004 L 4004<br />
3,0<br />
8,0<br />
88<br />
Pneumatic Probe 4034<br />
Mechanical<br />
Spacing 4,00 mm<br />
Rated spring force (± 20%) 1,6 N at working travel 5,0 mm<br />
Spring force 1,5 N at Switching travel 6,0 mm<br />
Spring force 1,1 N at full travel 10,0 mm<br />
Operating pressure 6 bar<br />
Operating medium compressed air (filtered, free of oil)<br />
Electrical receptacle-Headstyle hose connection-Headstyle<br />
max. current rating 3,0 A 1,0 A<br />
Typ. continuity resistance < 30 mOhm < 50 mOhm<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger steel<br />
Receptacle brass, gold plated<br />
Recommended Diameter of Drill<br />
HP 2361.1 (Trolitax) 3,40 mm<br />
HGW 2372 3,41 mm<br />
How to order:<br />
4034 - G - 1,6 N - Rh - 1,3<br />
Series<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
* Temperature range of the<br />
insulator (HTK) up to +300°C<br />
Contact<br />
Pressure<br />
Plating<br />
Tip Diameter<br />
(mm)
Name and Order-No. Dimensions Serie Series 1001<br />
Reducer<br />
RS 3/1<br />
Reducer<br />
RS 3/2<br />
Threated sleeve<br />
(incl. 1 seal)<br />
AV M5/1<br />
Threated sleeve<br />
(incl. 1 seal)<br />
AV M5/2<br />
Threated sleeve<br />
(incl. 1 seal)<br />
AV M5/3<br />
T-piece<br />
TS 3xM5<br />
Tenfold distributor<br />
V 10xM5<br />
Dummy plug for distributor<br />
(incl. 1 seal)<br />
BSV 1/8<br />
Dummy plug for distributor<br />
(incl. 1 seal)<br />
BSV M5<br />
Compressed air hose DS 1<br />
Compressed air hose DS 2<br />
20<br />
89<br />
pneumatic<br />
connection NW 1<br />
pneumatic<br />
connection NW 2<br />
pneumatic<br />
connection NW 1<br />
pneumatic<br />
connection NW 2<br />
pneumatic<br />
connection NW 3<br />
14<br />
76<br />
11,5<br />
13<br />
12,5<br />
12,5<br />
SW 14<br />
16,8<br />
SW 8<br />
M5<br />
SW 7<br />
M5<br />
SW 7<br />
12 8<br />
12,5<br />
M5<br />
G1/8<br />
SW 7<br />
M5<br />
6,6<br />
pneumatic<br />
connection NW 3<br />
pneumatic<br />
connection NW 3<br />
M5<br />
ø7,5<br />
0,8<br />
ø7,5<br />
ø13,5<br />
16<br />
ø7,5<br />
ø7,5<br />
0,8<br />
0,8<br />
0,8<br />
M5<br />
16<br />
G1/8
SERIES 5082<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
C<br />
D<br />
G<br />
15,0<br />
7,0<br />
10,0<br />
1,0<br />
ø 6,0<br />
ø 4,97<br />
4,00 • Au<br />
4,00M • Au<br />
4,00 • Au<br />
12,5<br />
1,0<br />
ø 6,0<br />
ø 5,6<br />
90<br />
ø 6,0<br />
5082 H 5082 ZRH 5082/3<br />
3,0<br />
Series 5082<br />
Mechanical<br />
Spacing 6,50 mm<br />
Full travel 4,00 mm<br />
Recommended working travel 3,20 mm<br />
How to order:<br />
5082 - D - 3,0N - Au - 4,0M<br />
Serie Series<br />
Headstyle Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Pre-loaded spring force 0,20/0,40/1,00/0,80/1,60 N<br />
Spring force at working travel 0,60/1,50/3,00/4,00/8,00 N<br />
Electrical<br />
max. current rating 5-8 A<br />
Typ. continuity resistance<br />
Materials<br />
< 30 mOhm<br />
Barrel brass, gold plated<br />
Spring stainless steel, gold plated<br />
Plunger steel or brass<br />
Receptacle brass, gold plated<br />
Recommended<br />
Diameter of Drill with without<br />
receptacle receptacle<br />
5,59 ... 5,60 mm 4,97 mm<br />
Plating<br />
Tip Material:<br />
brass<br />
Tip Diameter<br />
(mm)
Available Headstyles Series 5099 • 5099.04<br />
Headstyles Diameter • Plating<br />
5099<br />
D 0,6<br />
D<br />
G<br />
5099.04<br />
D4<br />
2,8<br />
5,1<br />
3,1<br />
0,6<br />
60°<br />
ø 1,3<br />
ø 2,5<br />
ø 2,0<br />
1,00C • Au<br />
1,30C • Au<br />
1,30C • Au<br />
1,30C • Au<br />
11,5<br />
5,7<br />
6,4<br />
0,4<br />
5099 5099.04 H 5099-25 H H 5099-50<br />
2,5<br />
0,2<br />
91<br />
Mechanical FK 5099 FK 5099.04<br />
Spacing 3,00 mm/120 mil<br />
Full travel 1,20 mm 4,00 mm<br />
Recommended working travel 1,00 mm 3,30 mm<br />
Pre-loaded spring force 0,50/0,30 N 0,25 N<br />
Spring force at working travel<br />
(± 20%)<br />
2,00/1,00 N 2,00 N<br />
Electrical<br />
max. current rating 1,5 A 1,0 A<br />
Typ. continuity resistance < 10 mOhm < 20 mOhm<br />
Materials<br />
Barrel brass, gold plated<br />
Spring spring steel, gold plated<br />
Plunger CuBe, gold plated<br />
Receptacle brass, gold plated<br />
Recommended<br />
Diameter of Drill without receptacle with receptacle<br />
HP 2361.1 (Trolitax) 1,99 mm 2,29 mm<br />
HGW 2372 2,00 mm 2,30 mm<br />
How to order:<br />
5099.04 - D4 - 2,0 N - Au - 1,3 C<br />
Series<br />
ø 2,5<br />
ø 2,3<br />
5,0<br />
Variant<br />
Headstyle<br />
Dimensions and Mounting Measures<br />
Contact<br />
Pressure Plating<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuBe<br />
SERIES 5099/5099.04
SERIES 5110<br />
Available Headstyles<br />
Headstyles Diameter • Plating<br />
5110/S · 5110/S.02<br />
C<br />
D<br />
E<br />
F<br />
5110/O.03<br />
D<br />
15,2<br />
7,2<br />
10,1<br />
1,6<br />
2,1<br />
ø 1,8<br />
ø 3,5<br />
ø 2,65<br />
2,30C • Au 3,50C • Au<br />
2,30C • Au<br />
2,30C • Au<br />
2,30C • Au<br />
2,30M • Au<br />
20,3<br />
13,3<br />
15,2<br />
8,2<br />
ø 3,0<br />
5110/S 5110/S.02 5110/O.03 H 5110<br />
92<br />
22,5<br />
Series 5110/S • 5110/S.02 • 5110/O.03<br />
Mechanical 5110/O.03<br />
Spacing 4,00 mm<br />
Full travel 3,50 mm 5,50 mm<br />
Recommended working travel 2,80 mm 4,50 mm<br />
Pre-loaded spring force 0,25/0,30/0,45/0,50 N 0,60 N<br />
Spring force at working travel<br />
(± 20%)<br />
0,80/1,20/1,50/2,50 N 1,50 N<br />
Electrical<br />
max. current rating 10 A<br />
Typ. continuity resistance<br />
Materials<br />
5110/O.03 - D - 1,5 N - Au - 2,3 M<br />
16,0<br />
15,0<br />
2,0<br />
8,5<br />
< 10 mOhm<br />
Barrel brass, gold plated<br />
Spring stainless steel, gold plated<br />
Plunger CuBe, gold plated or<br />
brass, gold plated<br />
Receptacle brass, gold plated<br />
Recommended<br />
Diameter of Drill<br />
HP 2361.1 (Trolitax) 2,64 mm<br />
HGW 2372 2,65 mm<br />
How to order:<br />
Series<br />
Collar<br />
Design<br />
Variant<br />
Dimensions and Mounting Measures<br />
Headstyle<br />
Contact<br />
Pressure<br />
13,6<br />
0,2<br />
Plating<br />
ø 3,3<br />
ø 3,0<br />
ø 2,08<br />
Tip Diameter<br />
(mm)<br />
Tip Material:<br />
CuZn<br />
CuBe
Available Headstyles<br />
Headstyles Diameter • Plating<br />
D<br />
T<br />
Indication for screwing:<br />
hexagon socket 2,0 mm<br />
30,5<br />
7,8<br />
1,5<br />
20,0<br />
1,0<br />
4,0<br />
ø6,0<br />
ø3,65<br />
ø4,5<br />
ø3,15<br />
ø0,8<br />
1,00x1,50 • Au<br />
1,00x0,50 • Au<br />
ø4,3<br />
15,0<br />
10,0<br />
0,3<br />
ø5,0<br />
ø4,7<br />
11,3<br />
4,9<br />
93<br />
Mechanical inner-contact ring-contact<br />
Spacing 6,50 mm 6,50 mm<br />
Full travel 3,50 mm 2,50 mm<br />
Recommended working travel 3,00 mm 2,00 mm<br />
Pre-loaded spring force 0,80 N 3,00 N<br />
Spring force at working travel<br />
(± 20%)<br />
1,50 N 5,00 N<br />
Electrical<br />
max. current rating 1,0 A 6,0 A<br />
Typ. continuity resistance<br />
Materials<br />
5207/G - D - 1,5 N - Au - 1,0x1,5/6,0 C<br />
ø1,83<br />
ø1,5<br />
ø1,14<br />
0,4<br />
< 10 mOhm<br />
Barrel CuBe, gold plated<br />
Spring spring steel, silver plated<br />
Plunger (inner) steel, gold plated<br />
Plunger (ring) CuBe, gold plated<br />
Receptacle brass, gold plated<br />
Connector brass, tin plated<br />
Recommended Diameter of Drill<br />
H5207 H5207/G<br />
HP 2361.1 (Trolitax) 4,69 mm 5,49 mm<br />
HGW 2372 4,70 mm 5,50 mm<br />
How to order:<br />
Series Thread<br />
ø6,0<br />
M5x0,5<br />
5207 H 5207 A 5207 5207/G H 5207/G<br />
Headstyle<br />
Contact<br />
Pressure<br />
Dimensions and Mounting Measures<br />
Coaxial-Test Probe 5207•5207/G<br />
Tip Height<br />
Plating (mm)<br />
Ring contactInner-contactø<br />
(mm)<br />
ø (mm)<br />
ø6,0<br />
ø5,5<br />
SERIES 5207 • 5207/G
Sleeve Insertion Tools<br />
Sleeve insertion tools (<strong>test</strong> fixture ICT/FT)<br />
Insert<br />
Take-up<br />
Receptacle<br />
H 1007<br />
H 1008<br />
H 1010<br />
H 1012<br />
H 1015<br />
H 1021<br />
H 1021/GV..<br />
H 1025<br />
H 1030<br />
H 1050<br />
H 1053/GRV<br />
H1053/GVRV<br />
H 2021<br />
H 2050<br />
H 5104..<br />
Sleeve insertion tools (cable <strong>test</strong>)<br />
Receptacle<br />
H 1015<br />
H 1021<br />
H 1021/G<br />
H 1042<br />
H 1050<br />
H 1060/G<br />
H 2021<br />
H 2050<br />
H 3010, H 3010/GS<br />
H 3011<br />
H 3020, H 3020/GS<br />
Sleeve insertion<br />
tool (complete)<br />
WHE 137<br />
WHE 165<br />
WHE 165<br />
WHE 300<br />
WHE 265<br />
WHE 265<br />
WHE 165<br />
WHE 265<br />
WHE 265<br />
WHE 265<br />
WHE 165<br />
Sleeve insertion<br />
complete Einsatz<br />
WHE 1200/07 WHE 1200/007<br />
WHE 1200/08 WHE 1200/008<br />
WHE 1200/12 WHE 1200/012<br />
WHE 1200/12 WHE 1200/012<br />
WHE 1200/15 WHE 1200/015<br />
WHE 1200/21 WHE 1200/021<br />
WHE 1200/21-V WHE 1200/021-V<br />
WHE 1200/15 WHE 1200/015<br />
WHE 1200/30 WHE 1200/030<br />
WHE 1200/50 WHE 1200/050<br />
WHE 1200/53-V WHE 1200/053-V<br />
WHE 1200/21 WHE 1200/021<br />
WHE 1200/50 WHE 1200/050<br />
WHE 1200/5104 WHE 1200/05104<br />
Take-up<br />
94<br />
Sleeve Insertion Tools<br />
are used for the trouble-free fitting<br />
of sleeves in the assembly holes.<br />
Operational steps:<br />
1. Insert sleeve in the assembly hole.<br />
2. Place insertion tool in the sleeve<br />
and exert gentle pressure by hand.<br />
3. Gently tap the insertion tool with<br />
a light-weight hammer until the<br />
sleeve is fitted up to the hilt or,<br />
if a guide ring is used, up to the<br />
required depth.<br />
As an alternative, the insert can<br />
be fitted into the chuck of a pillar<br />
drilling machine and then pushed<br />
into the probe location board either<br />
manually or by advancing the<br />
spindle. Advantage: smoother and<br />
gentler than tapping with a hammer.<br />
Disadvantage: more time-consuming.<br />
Screw-type tools<br />
permit threaded <strong>test</strong> <strong>probes</strong> to be<br />
fitted into or removed from their<br />
sleeves quickly, especially where the<br />
smallest possible spacings<br />
are being used.<br />
Insert
Screwing tools for screwing and push back <strong>probes</strong><br />
Test Probe<br />
Type<br />
1010/G 1,5 1,0 WFS 1010/G-1,5-1,0 closed square section<br />
1015/G 2,54 1,5 WFS 1015/G-2.54-1.5 closed square section<br />
1015/G 2,54 1,8 WFS 1015/G-2.54-1.8 closed square section<br />
Suitable for<br />
1021/G(V)<br />
3020/2G<br />
3023/2G<br />
Suitable for<br />
1060/G<br />
3010/2G<br />
3011/2G<br />
Insert<br />
Smallest<br />
spacing<br />
in mm<br />
2,54 1,8 WFS 1021/G-2.54-1.8 closed square section<br />
2,54 2,0 WFS 1021/G-2.54-2.0 closed square section<br />
4,0 3,0 WFS 1060/G-4.0-3.0 closed square section<br />
5,0 4,0 WFS 1060/G-5.0-4.0-Z claw, only for two row position<br />
6,0 5,0 WFS 1060/G-6.0-5.0-Z claw, only for two row position<br />
1060/G 5 6,0 5,0 WFS 1060/G5-6.0-5.0 closed square section with SW 5<br />
1070/G<br />
1075/G (Kragen Ø4,3) 5,0 4,0 WFS 1070/G-5,0-4,0 closed square section<br />
5087 4,0 2,5 WFS 5087-4.0-2.5 closed square section<br />
5087 5,5 3,0 WFS 5087-5.5-3.0-Z claw, only for two row position<br />
5104 4,0 2,5 WFS 5087-4.0-2.5 closed square section<br />
5104 5,5 3,0 WFS 5087-5.5-3.0-Z claw, only for two row position<br />
Further tools on request !<br />
When ordering please mention the <strong>test</strong> probe type !<br />
Insertion and extraction tools for <strong>test</strong> <strong>probes</strong><br />
Test Probe Type<br />
Largest<br />
possible tip<br />
diameter<br />
Screw-type tool<br />
Smallest<br />
spacing<br />
in mm<br />
95<br />
Tipstyle<br />
diameter<br />
in mm<br />
Special<br />
Insertion tool Extraction tool<br />
1015 2,54 up to 0,9 WFEA 1015 flat-nose-pliers<br />
1015 2,54 0,9 ... 2,0* WFEA 1015 WFEA 1015<br />
1021, 2021 2,54 up to 1,2 WFEA 1021 flat-nose-pliers<br />
1021, 2021 2,54 1,2 ... 2,0* WFEA 1021 WFEA 1021<br />
1050, 1060 4,0 up to 2,0 WFEA 1050 flat-nose-pliers<br />
1050, 1060 4,0 2,0 ... 3,0* WFEA 1050 WFEA 1050<br />
3010/.. 4,0 up to 2,0 WFEA 1050 flat-nose-pliers<br />
3010/.. 4,0 2,0 ... 3,0* WFEA 1050 WFEA 1050<br />
3020/2 2,54 up to 1,2 WFEA 1021 flat-nose-pliers<br />
3020/2 2,54 1,2 ... 2,0* WFEA 1021 WFEA 1021<br />
3030 2,54 up to 1,0 WFEA 3030 flat-nose-pliers<br />
3030 2,54 1,0 ... 2,3* WFEA 3030 WFEA 3030<br />
*When to use bigger headdiameters please order for special tools !<br />
When ordering please mention the <strong>test</strong> probe type !<br />
max.<br />
Torque/Ncm<br />
1<br />
5<br />
5<br />
5<br />
5<br />
25 (3011: 20)<br />
25 (3011: 20)<br />
25 (3011: 20)<br />
25<br />
25<br />
A B
List of recommended torques for <strong>test</strong> <strong>probes</strong> with thread<br />
Attention: When you exceed this recommended torques the <strong>test</strong> probe or the screwing tool can be demaged.<br />
– damage of the thread, compression of barrel or receptacle, damage of the square, breaking of the tool,<br />
widen of the tool in square area<br />
Series<br />
Type<br />
Scale<br />
(Ncm)<br />
Recommended<br />
Torque<br />
Colour<br />
DMS 1 1.0 gold<br />
DMS 2 2.0 green<br />
DMS 3 3.0 blue<br />
DMS 4 4.0 red<br />
Screwing Tools<br />
96<br />
max. Torque<br />
1010/G 1 Ncm WFS 1010/G-1,5-1,0 max. 1,5 Ncm<br />
1015/G 2 Ncm WFS 1015/G-2,54-1,5 or WFS 1015/G-2,54-1,8 max. 3 Ncm<br />
1021/G(/V) 3 Ncm WFS 1021/G-2,54-1,8 or WFS 1021/G-2,54-2,0 or 1021/G-C2S-3,0-2,5-Z max. 5 Ncm<br />
1042/G 4 Ncm Screwdriver 1,8x0,5 max. 15 Ncm<br />
1053/G 4 Ncm WFS 1053/G-5,0-4,0-Z or WFS 1053/G-6,0-5,0-Z max. 15 Ncm<br />
1060/G(4,5) 4 Ncm WFS 1060/G-4,0-3,0 or WFS 1060/G-5,0-4,0-Z or WFS 1060/G-6,0-5,0-Z max. 15 Ncm<br />
1070/G 4 Ncm WFS 1070/G-5,0-4,0 max. 15 Ncm<br />
1075/G 4 Ncm WFS 1070/G-5,0-4,0 (collar Ø4,3) or WFS 1075/G-5,0-4,0-Z (collar Ø4,0) max. 15 Ncm<br />
3010/2G(W, W5) 4 Ncm WFS 1060/G-4,0-3,0 or WFS 1060/G-5,0-4,0-Z or WFS 1060/G-6,0-5,0-Z max. 15 Ncm<br />
3010/10G 4 Ncm WFS 1060/G-4,0-3,0 or WFS 1060/G-5,0-4,0-Z or WFS 1060/G-6,0-5,0-Z max. 15 Ncm<br />
3011/2GS 4 Ncm WFS 1060/G-4,0-3,0 or WFS 1060/G-5,0-4,0-Z or WFS 1060/G-6,0-5,0-Z max. 15 Ncm<br />
3012/2GS 4 Ncm Screwdriver 1,8x0,5 max. 7 Ncm<br />
3014/2G 4 Ncm WFS 1060/G-4,0-3,0 or WFS 1060/G-5,0-4,0-Z or WFS 1060/G-6,0-5,0-Z max. 15 Ncm<br />
3020/2G(W5) 2 Ncm WFS 1021/G-2,54-1,8 or WFS 1021/G-2,54-2,0 or 1021/G-C2S-3,0-2,5-Z max. 7 Ncm<br />
3023/2G(S) 2 Ncm WFS 1021/G-2,54-1,8 or WFS 1021/G-2,54-2,0 or 1021/G-C2S-3,0-2,5-Z max. 4 Ncm<br />
3028.01 2 Ncm WFS 1021/G-2,54-1,8 or WFS 1021/G-2,54-2,0 or 1021/G-C2S-3,0-2,5-Z max. 5 Ncm<br />
4004/G 4 Ncm WFS 1060/G-4,0-3,0 or WFS 1060/G-5,0-4,0-Z or WFS 1060/G-6,0-5,0-Z max. 15 Ncm<br />
5071/10G 4 Ncm WFS 1060/G-4,0-3,0 or WFS 1060/G-5,0-4,0-Z or WFS 1060/G-6,0-5,0-Z max. 15 Ncm<br />
5110/G 3 Ncm WFS 1060/G-4,0-3,0 or WFS 1060/G-5,0-4,0-Z or WFS 1060/G-6,0-5,0-Z max. 10 Ncm<br />
5207/G 4 Ncm Allan key 2mm max. 15 Ncm<br />
To combine the torque screwdriver and the screwing tools a special<br />
adapter is required.<br />
Order specification: Adapter for screwing tools AWFS<br />
Torque screwdriver 1 – 4 Ncm<br />
Safety against overtorking<br />
– torque screwdriver with disenaging<br />
coupling<br />
– independent from the user, because of<br />
the automatic torque-disenaging-<br />
coupling (overtorquing is impossible)
97<br />
NOTES
The Representations<br />
G L O B A L<br />
Wöhrleitner + Wöhrleitner<br />
GmbH<br />
Volksheimgasse 28<br />
A - 2351 Wiener Neudorf<br />
Tel. +43/22 36/6 28 18-10<br />
Fax +43/22 36/6 28 18-19<br />
e-mail: office@woehrleitner.at<br />
www.woehrleitner.at<br />
Technik Partner s.r.o.<br />
Brand´yská 103<br />
CZ – 181 00 Praha 8<br />
Tel. +420/2 83 85 17 81<br />
Fax +420/2 83 85 27 75<br />
e-mail: info@technikpartner.cz<br />
<strong>Phoenix</strong> <strong>Mecano</strong> Sarl<br />
76, rue du Bois – Galon<br />
F – 94121 Fontenay – Sous Bois Cedex<br />
Tel. +33/15/3 99 50 59<br />
Fax +33/15/3 99 50 79<br />
e-mail: Info.ptr@phoenix-mecano.com<br />
Elincom electronics BV<br />
Klaverbaan 101-103<br />
2908 KD Capelle aan den Ijssel<br />
Tel. +31/10/26 40 270<br />
Fax +31/10/26 40 275<br />
e-mail: info@elincom.nl<br />
www.elincom.nl<br />
<strong>Phoenix</strong> <strong>Mecano</strong> S.E. Asia<br />
Pte Ltd<br />
53 Ubi Ave 3 #04-01<br />
Colourscan Bldg.<br />
SGP – 408863 Singapore<br />
Tel. +65/6749/16 11<br />
Fax +65/6749/67 66<br />
DOTEST S.L.<br />
Gran Via de Carles III, 33-35 Baixos<br />
E – 08028 Barcelona<br />
Tel. +34/93/4 90 55 60<br />
Fax +34/93/4 11 82 44<br />
e-mail: do<strong>test</strong>@do<strong>test</strong>sl.com<br />
USA<br />
GTI General Test Industries<br />
P.O Box 50<br />
Vale, NC 28168-0050<br />
USA<br />
Tel. +704/7 36 04 56<br />
Fax +704/7 36 05 65<br />
e-mail: info@general<strong>test</strong>.com<br />
http://www.gti-web.com<br />
<strong>Phoenix</strong> <strong>Mecano</strong> Comercial<br />
e Tecnica Ltda.<br />
Av. Prof. Alceu Maynard de Araujo, 185<br />
BR – 04726-160 Sao Paulo<br />
Tel. +55/11/56 41 22 01<br />
Fax +55/11/56 41 08 82<br />
email: vendas@phoenix-mecano.com.br<br />
Hans Folsgaard A/S<br />
Ejby Industrivej 30<br />
DK - 2600 Glostrup<br />
Tel. +45/43/20 86 00<br />
Fax +45/43/20 86 37<br />
e-mail: hf@hf.net<br />
www.hf.net<br />
HUNGARY<br />
<strong>Phoenix</strong> <strong>Mecano</strong> Kecskemét<br />
Istvan Kiraly krt. 24<br />
H – 6000 Kecskemét<br />
Tel. +36/12/60 77 30<br />
Fax +36/12/61 34 64<br />
e-mail: info@phoenix-mecano.hu<br />
MEXICO<br />
Servicios y Distribuciones<br />
Insurgentes Sur 569,Oficina 302<br />
Colonia Napoles, Benito Juarez<br />
C.P. 03810 Mexico D.F.<br />
Tel.: +52/55/56 82 93 71<br />
Fax: +52/55/56 69 28 01<br />
e-mail: averdejo@ptr-mexico.com<br />
<strong>Phoenix</strong> <strong>Mecano</strong><br />
Komponenten AG<br />
Hofwisenstr. 6, Postfach 132<br />
CH - 8260 Stein am Rhein<br />
Tel. 00 41-5 27 42 75 00<br />
Fax 00 41-5 27 42 75 90<br />
e-mail:<br />
zentrale.pmk@phoenix-mecano.com<br />
TUNISIA, MOROCCO,<br />
ALGERIA<br />
EP Technology Group<br />
29-AV. Ahmed TLILI<br />
ZI Borj Cédria 2055 Bir el Bey<br />
Tunis, Tunisia<br />
Tel. +216/79/41 28 - 89/ - 92<br />
Fax +216/79/41 29 - 66<br />
e-mail: info@ep-technologie.com<br />
www.ep-technologie.com<br />
98<br />
M.P.EL GmbH<br />
30 Sofronii Vrachanski Str.<br />
1303 Sofia, Bulgaria<br />
Tel/Fax: +359/2/9318002<br />
e-mail: sales@mpeltrade.com<br />
www.mpeltrade.com<br />
ENGLAND<br />
Peak Test Services<br />
152 Front Street, Chester-le-Street<br />
GB – Co. Durham DH3 3AY<br />
Tel. +44/191/3 87 19 23<br />
Fax +44/191/3 87 19 94<br />
e-mail: peak.<strong>test</strong>@thepeakgroup.com<br />
www.thepeakgroup.com<br />
Fast Elettronica Italiana S.p.A.<br />
Via Rovetta 35<br />
I – 20127 Milano<br />
Tel. +390/2/2 61 01 41<br />
Fax +390/2/2 82 22 87<br />
e-mail: sales@fastelettronica.com<br />
Semicon Sp. Z o.o.<br />
ul. Zwolenska 43<br />
PL-04-761 Warszawa<br />
Tel. +48/22/6 15 64 31<br />
Fax +48/22/6 15 73 75<br />
e-mail: info@semicon.com.pl<br />
www.semicon.com.pl<br />
Wiltron Agencies CC<br />
P.O. Box 14 33<br />
ZA – Hartbeespoort 0216<br />
Tel. +27/12/2 44 02 22<br />
Fax +27/12/2 44 02 24<br />
e-mail: wiltron@global.co.za<br />
Elopar Ltd. STI.<br />
Istanbul Caddesi<br />
Kavakli Köy Yolu<br />
TR-Beylikdüzü<br />
Kavakli/Büyükcekmece/Istanbul<br />
Tel. +90/212/8 75 19 40<br />
Fax +90/212/8 75 04 73<br />
e-mail: elopar@elopar.com.tr
GERMANY<br />
H.J. Merck & Co. GmbH<br />
Hasenhöhe 128<br />
22587 Hamburg<br />
Tel. 0 40/87 08 63-0<br />
Fax 0 40/87 08 63-33<br />
e-mail: info@hj-merck.de<br />
http://www.hj-merck.de<br />
PTR MESSTECHNIK<br />
GMBH & CO. KG<br />
Vertriebsbüro Werne<br />
Reimund Beumer<br />
Gewerbehof 38<br />
59368 Werne<br />
Tel. 0 23 89/79 88 164<br />
Mobil 01 60/97 22 56 67<br />
Fax 0 23 89/79 88 88<br />
e-mail: rbeumer@ptr.eu<br />
PTR MESSTECHNIK<br />
GMBH & CO. KG<br />
Vertriebsbüro Frankfurt<br />
Jürgen Bierent<br />
Asternweg 6 a<br />
63322 Rödermark<br />
Tel. 06074/94803<br />
Fax 0 60 74/9 48 33<br />
e-mail: jbierent@ptr.eu<br />
26<br />
46<br />
45<br />
WERNE<br />
47 44 59<br />
41<br />
40<br />
42<br />
58<br />
Hagen<br />
52<br />
Köln<br />
50<br />
51<br />
57<br />
Siegen<br />
Aachen<br />
54<br />
Trier<br />
53<br />
66<br />
Bonn<br />
Saarbrücken<br />
Emden<br />
48<br />
Münster<br />
55<br />
56<br />
Koblenz<br />
79<br />
Oldenburg<br />
49<br />
67<br />
77<br />
Osnabrück<br />
Mainz<br />
65<br />
Kaiserslautern<br />
Offenb.<br />
Freiburg<br />
Karls ruhe<br />
76<br />
99<br />
33<br />
35<br />
61<br />
60<br />
64<br />
69<br />
68<br />
28<br />
32<br />
Bielefeld<br />
Giessen<br />
75<br />
72<br />
78<br />
25<br />
Bremerhaven<br />
Bremen<br />
FFM<br />
34<br />
63<br />
27<br />
Kassel<br />
31<br />
71<br />
70<br />
Tübingen<br />
Herbert Altenberger OHG<br />
Industrievertretungen<br />
Römerweg 7<br />
76456 Kuppenheim<br />
Tel. 0 72 22/94 54-0<br />
Fax 0 72 22/94 54 54<br />
e-mail: info@altenberger.de<br />
http://www.altenberger.de<br />
H.Biedermann GmbH<br />
Ingenieurbüro<br />
Dr.-Albert-David-Str. 21<br />
30938 Burgwedel<br />
Tel. 05139/80095<br />
Fax 0 51 39/45 42<br />
e-mail: info@h-biedermann.de<br />
http://www.h-biedermann.de<br />
Flensburg<br />
74<br />
24<br />
Elmshorn<br />
Fulda<br />
36<br />
Heilbronn<br />
Stuttgart<br />
88<br />
30<br />
37<br />
97<br />
22<br />
20<br />
73<br />
Kiel<br />
Hamburg<br />
21<br />
Celle<br />
Hannover<br />
Göttingen<br />
Würzburg<br />
Ulm<br />
Friedrichshafen<br />
89<br />
Lübeck<br />
87<br />
29<br />
98<br />
23<br />
38<br />
Braunschweig<br />
Kempten<br />
99<br />
Erfurt<br />
Suhl<br />
91<br />
90<br />
Ansbach<br />
86<br />
Schwerin<br />
96<br />
Bamberg<br />
19<br />
Nürnberg<br />
Augsburg<br />
82<br />
39<br />
Magdeburg<br />
Ingolstadt<br />
Halle<br />
06<br />
Gera<br />
07<br />
85<br />
8081<br />
95<br />
Rostock<br />
Hof<br />
Amberg<br />
93<br />
München<br />
Ingenieurbüro gedruckte<br />
Schaltungstechnik<br />
Jürgen Rennecke<br />
Achtbeeteweg 49 B<br />
01189 Dresden<br />
Tel. 0351/4761995<br />
Fax 0351/4726825<br />
e-mail: juergen.rennecke@t-online.de<br />
92<br />
Stralsund<br />
08<br />
18<br />
84<br />
16<br />
14<br />
Potsdam<br />
Leipzig<br />
Zwickau<br />
Landshut<br />
83<br />
Rosenheim<br />
Neubrandenburg<br />
04<br />
17<br />
Oranienburg<br />
Chemnitz<br />
09<br />
94<br />
13 1012<br />
Berlin<br />
Dresden<br />
Passau<br />
03<br />
01<br />
15<br />
FF-Oder<br />
Cottbus<br />
IS Sichinger Vertriebs GmbH<br />
Boschstr. 8<br />
82178 Puchheim<br />
Tel. 0 89/86 49 10-0<br />
Fax 0 89/86 49 10 22<br />
e-mail: js@is-sichinger.de<br />
02<br />
Bautzen
PRODUCT<br />
RANGE<br />
PCB terminal blocks<br />
and multiconnector systems with<br />
screw or spring connection<br />
Terminal blocks for Din rail<br />
or direct mounting<br />
and transformer terminals<br />
PTR Messtechnik GmbH & Co. KG<br />
Gewerbehof 38 • D-59368 Werne<br />
P.O. Box 1462 • D-59357 Werne<br />
Phone: + 49 (0) 23 89/79 88-0<br />
Fax: + 49 (0) 23 89/79 88 88<br />
e-mail: info@ptr.eu<br />
http://www.ptr.eu<br />
The information given in this catalogue has been carefully checked<br />
for correctness. However, no liability can be accepted for any errors<br />
or incomplete data. This catalogue replaces all earlier editions.<br />
We reserve the right to make any changes which are in the interest<br />
of technical improvement. 07/07<br />
Test <strong>probes</strong><br />
for PCB and cable <strong>test</strong>ing<br />
Presented by<br />
ISO<br />
9001<br />
ZERTIFIZIERTES<br />
S Y S T E M