4 General Technical Specification of Bhilai Steel Plant, SAIL ...
4 General Technical Specification of Bhilai Steel Plant, SAIL ... 4 General Technical Specification of Bhilai Steel Plant, SAIL ...
© 2007 MECON Limited All rights reserved General Technical Specification Item Size Range Description Dimensional/ Design Standard Steam trap Note: 50 and below Thermodynamic steam trap with inbuilt strainer, Class 800/900 and SW ends Manufacturer’s Standard Gases & Liquid Fluids Page 40 of 51 Material - Carbon Steel Body / Cap / Plug A743 Gr CA 40 1. Class 150 for condensate and LP steam 2. Class 300 for MP steam 3. For feed water, schedule / thickness of pipe fittings and class ratings are to be selected by the tenderer based on pressure and temperature of feed water. SERVICE : MEDIUM PRESSURE OXYGEN PIPING MATERIAL SPECIFICATION SERVICE CONDITIONS : Maximum Operating Pressure 16 kgf /cm2 Temp 60 o C CORROSION ALLOWANCE : 2 m.m. Cleaning, Pickling, Passivation & Degreasing As Per IGC / IPSS code Item Size Range Description Dimensional/ Design Standard Pipe Fire Breaker Fittings Material - Carbon Steel DN 6 to 10 Seamless Tube Deoxidized non- Arsenic Copper or Aluminum DN 15 to 40 Seamless PE Sch. 80 B 36.10 Carbon Steel, ASTM A106 GR.B DN 50 to 150 Seamless BE Sch.40 B36.10 ASTM A106 GR.B DN 200 to 300 Seamless BE Sch.40 B36.10 ASTM A106 GR.B DN 350 to 600 Seamless BE Sch.40 B36.10 ASTM A106 GR.B DN 50 to 150 Copper Pipe B36.10 Deoxidised non Arsenic Copper DN 200 to 600 Copper Pipe B36.10 Deoxidised non Arsenic Copper DN 15 to 40 SW Fittings # 3000 DN 50 and above BW Fittings ANSI B 16.11 ASTM A 105 ANSI B16.9 ASTM A234 Gr WPB Flanges DN 15 to 40 SW:RF : Serrated Finish B 16.5 ASTM A 105 DN 50 above WNRF : Serrated Finish B 16.5 ASTM A 105 Gaskets All sizes PTFE LOX GRADE B16.21 Valves DN 15 to 40 Ball valve class 800 for isolation purpose Flanged ends (class 300) BS 5351 Body A182 GR. 304; /BRONZE ;13% Cr Trim / BRONZE GS-02
© 2007 MECON Limited All rights reserved General Technical Specification Item Size Range Description Dimensional/ Design Standard DN 50 and above Ball valve class 300 for isolation purpose Flanged ends (class 300) DN 15 to 40 Globe valve class 800 for throttling purpose, flange end (class 300) DN 50 and above Globe valve class 300 for throttling purpose with flange end DN 15 to 40 Check valve class 800 with flanged end class 300 DN 50 and above Check valve class 300 with flanged end DN 15 & Above Ball valve flanged RF Serrated finish SERVICE : HIGH PRESSURE OXYGEN PIPING MATERIAL SPECIFICATION Gases & Liquid Fluids Page 41 of 51 Material - Carbon Steel API 600 Body A351 GR. CF8; /BRONZE ;13% Cr Trim / BRONZE BS 5352 Body : Bronze Trim: Bronze BS 1873 Body : Bronze Trim: Bronze BS 5352 Body A182 GR. 304; /BRONZE ;13% Cr Trim / BRONZE BS 1868 Body A351 GR. CF8; /BRONZE ;13% Cr Trim / BRONZE BS 5351 Body A351 GR.CF8 ; A182 GR. 304 Trim;PTFE Seat SERVICE CONDITIONS : Maximum Operating Pressure 40 kgf /cm2 Temp 60 o C Minimum Operating Pressure 16 kgf /cm2 Temp 5 o C RATING : # 300 Matching Companion Flanges of Valves & flow components as per corresponding rating. CORROSION ALLOWANCE : 2 m.m. Cleaning, Pickling, Passivation & Degreasing As Per IGC / IPSS code Item Size Range Description Dimensional/ Design Pipe Standard Material - Carbon Steel DN 6 to 10 Seamless tube Deoxidized non- Arsenic copper or Aluminum DN 15 to 40 Seamless PE Sch. 80 B 36.10 Carbon Steel, ASTM A106 GR.B DN 50 to 150 Seamless BE Sch.40 B36.10 ASTM A106 GR.B DN 200 to 250 Seamless BE Sch.40 B36.10 ASTM A106 GR.B GS-02
- Page 29 and 30: Sl. No. © 2007 MECON Limited All r
- Page 31 and 32: Sl. No. © 2007 MECON Limited All r
- Page 33 and 34: Sl. No. 14. SPM analyser 15. SOx- N
- Page 35 and 36: SL. NO. 1. Hood, Stack and Lance se
- Page 37 and 38: © 2007 MECON Limited All rights re
- Page 39 and 40: SL. NO. © 2007 MECON Limited All r
- Page 41 and 42: 02. GASES AND LIQUID FUELS 02.01. R
- Page 43 and 44: © 2007 MECON Limited All rights re
- Page 45 and 46: © 2007 MECON Limited All rights re
- Page 47 and 48: © 2007 MECON Limited All rights re
- Page 49 and 50: © 2007 MECON Limited All rights re
- Page 51 and 52: © 2007 MECON Limited All rights re
- Page 53 and 54: © 2007 MECON Limited All rights re
- Page 55 and 56: © 2007 MECON Limited All rights re
- Page 57 and 58: © 2007 MECON Limited All rights re
- Page 59 and 60: © 2007 MECON Limited All rights re
- Page 61 and 62: © 2007 MECON Limited All rights re
- Page 63 and 64: © 2007 MECON Limited All rights re
- Page 65 and 66: © 2007 MECON Limited All rights re
- Page 67 and 68: © 2007 MECON Limited All rights re
- Page 69 and 70: © 2007 MECON Limited All rights re
- Page 71 and 72: © 2007 MECON Limited All rights re
- Page 73 and 74: © 2007 MECON Limited All rights re
- Page 75 and 76: © 2007 MECON Limited All rights re
- Page 77 and 78: © 2007 MECON Limited All rights re
- Page 79: © 2007 MECON Limited All rights re
- Page 83 and 84: © 2007 MECON Limited All rights re
- Page 85 and 86: © 2007 MECON Limited All rights re
- Page 87 and 88: © 2007 MECON Limited All rights re
- Page 89 and 90: © 2007 MECON Limited All rights re
- Page 91 and 92: © 2007 MECON Limited All rights re
- Page 93 and 94: © 2007 MECON Limited All rights re
- Page 95 and 96: © 2007 MECON Limited All rights re
- Page 97 and 98: © 2007 MECON Limited All rights re
- Page 99 and 100: © 2007 MECON Limited All rights re
- Page 101 and 102: 01.04 Primer Paint - P4 (Epoxy Base
- Page 103 and 104: © 2007 MECON Limited All rights re
- Page 105 and 106: 03.06 Finish Paint - F6 © 2007 MEC
- Page 107 and 108: Sl. No. © 2007 MECON Limited All r
- Page 109 and 110: © 2007 MECON Limited All rights re
- Page 111 and 112: QUALITY ASSURANCE PLAN FOR CONTRACT
- Page 113 and 114: CONTRACTOR PROJECT ORDER NO. & DATE
© 2007 MECON Limited<br />
All rights reserved<br />
<strong>General</strong> <strong>Technical</strong> <strong>Specification</strong><br />
Item Size Range Description Dimensional/<br />
Design<br />
Standard<br />
DN 50 and above Ball valve class 300 for<br />
isolation purpose Flanged<br />
ends (class 300)<br />
DN 15 to 40 Globe valve class 800 for<br />
throttling purpose, flange<br />
end (class 300)<br />
DN 50 and above Globe valve class 300 for<br />
throttling purpose with<br />
flange end<br />
DN 15 to 40 Check valve class 800 with<br />
flanged end class 300<br />
DN 50 and above Check valve class 300 with<br />
flanged end<br />
DN 15 & Above Ball valve flanged RF<br />
Serrated finish<br />
SERVICE : HIGH PRESSURE OXYGEN<br />
PIPING MATERIAL SPECIFICATION<br />
Gases & Liquid Fluids<br />
Page 41 <strong>of</strong> 51<br />
Material -<br />
Carbon <strong>Steel</strong><br />
API 600 Body A351 GR. CF8;<br />
/BRONZE ;13% Cr<br />
Trim / BRONZE<br />
BS 5352 Body : Bronze<br />
Trim: Bronze<br />
BS 1873 Body : Bronze<br />
Trim: Bronze<br />
BS 5352 Body A182 GR. 304;<br />
/BRONZE ;13% Cr<br />
Trim / BRONZE<br />
BS 1868 Body A351 GR. CF8;<br />
/BRONZE ;13% Cr<br />
Trim / BRONZE<br />
BS 5351 Body A351 GR.CF8 ;<br />
A182 GR. 304<br />
Trim;PTFE Seat<br />
SERVICE CONDITIONS : Maximum Operating Pressure 40 kgf /cm2 Temp 60 o C<br />
Minimum Operating Pressure 16 kgf /cm2 Temp 5 o C<br />
RATING : # 300<br />
Matching Companion Flanges <strong>of</strong> Valves & flow components as per<br />
corresponding rating.<br />
CORROSION ALLOWANCE : 2 m.m.<br />
Cleaning, Pickling, Passivation & Degreasing As Per IGC / IPSS code<br />
Item Size Range Description Dimensional/<br />
Design<br />
Pipe<br />
Standard<br />
Material -<br />
Carbon <strong>Steel</strong><br />
DN 6 to 10 Seamless tube Deoxidized non-<br />
Arsenic copper or<br />
Aluminum<br />
DN 15 to 40 Seamless PE Sch. 80 B 36.10<br />
Carbon <strong>Steel</strong>, ASTM<br />
A106 GR.B<br />
DN 50 to 150 Seamless BE Sch.40 B36.10 ASTM A106 GR.B<br />
DN 200 to 250 Seamless BE Sch.40 B36.10 ASTM A106 GR.B<br />
GS-02