SDL-IDEAS-CAT2022

SDL ~ Ideas-Catalogue 2022 ~
CANTILEVER RACKING Best for Warehouse, Storeroom or Workshop | up to 600kg UDL/arm
82
Heights Widths Depths Construction Application Construction Loadings Loadings
Standard height (mm)
1976
Other available heights (mm)
2432, 2964
Widths (mm)
1000, 1500
Base depths (mm)
Single sided 780, 980, 1180
Double sided 1380, 1780,
2180
Arm Length
600, 800, 1000
Guarantee
£457. 55 CANTILEVER RACK
Arm Load
450
DAYS
KG
Delivery
Frame: Steel
Galvanised
Bracing:Steel
Galvanised,
Blue RAL5015
Arms: Steel
Blue RAL5015
Arm pins: Steel
Our cantilever system is based on modular bays
and fittings to provide cost effective storage of
long and awkward items.
The frames are available in three heights and three depths in
both single and double sided configurations. Each bay comes
complete with three arms per frame and you can add or deduct
the number of levels required.
The arms can be fitted with end stops (at an additional cost
shown) to secure any loose products from falling off. The
frames are spaced 1000mm or 1500mm apart with bolted on
X brace, so you can easily work out your run using the starter
and extension bay.
• Incredible value for money
• Easy to build and reconfigure
• Up to 2200kgs per side
• Arms adjust every 75mm
• Tough epoxy finish
Height
(mm)
Max Load/Arm*
600kg
Max Load Per Side
Arm
600mm
Arm
800mm
scan for
assembly
storagecatalogue.co.uk
/cantilever
Arm
1000mm
1976mm 2200kg 1900kg 1600kg
2432mm 2200kg 1900kg 1600kg
2964mm 2200kg 1900kg 1100kg
STORAGE DESIGN LTD TEL:01446772614 www.storagedesignltd.com info@storage-design.ltd.uk