uhf tacsat /dama multi-service tactics, techniques ... - UHF-Satcom.com
uhf tacsat /dama multi-service tactics, techniques ... - UHF-Satcom.com uhf tacsat /dama multi-service tactics, techniques ... - UHF-Satcom.com
Figure C-9. DAMA 25-kHz AC Call Menu C-23
q. Terminate 25-kHz AC DAMA calls on completion. The user should terminate a timed or indefinite call so the channel controller can reassign that channel to another terminal in the network. Perform the following procedures to terminate a call: (1) From a service state display indicating ACTIVE and time remaining, press CALL. (2) From SELECT REQUEST TYPE display, select TERMINATE CALL with the up/down arrow keys; press ENT. (3) The TERMINATE CALL request is sent to the channel controller. The channel controller tearsdown the service and the service state of the terminal returns to one of the service states (IDLE, PENDING, or QUEUED), depending on other ongoing requests. r. Send a 25-kHz AC DAMA out-of-service request to the channel controller instead of logging out as in 5-kHz DAMA. In these requests, the duration for being out of service, precedence, and reason code is transmitted. If another station attempts to call the terminal during the out-of-service period, the channel controller can report the reason code and time to be out of service to that user. Perform the following procedures to send an out-of-service request: (1) Press CALL key to bring up SELECT REQUEST TYPE display. (2) Select OUT OF SERVICE and press ENT. (3) Select precedence for out-of-service request and press ENT. (4) Enter two-digit numerical out-of-service code. (5) Enter duration for the out of service period; use 0000 if it is to be indefinite. Press ENT. (6) The out-of-service request is sent to the channel controller. Watch the display for acknowledgement from the channel controller. s. To return to service in 25-kHz AC DAMA operation, send a status report B RCCOW (menu item RETURN TO SERVICE) to the channel controller. This informs the channel controller that the operator has returned. When an operational radio is unmanned, it is not necessary to use this menu item when turning on after a power off. The RCCOW sent to the channel controller when connected notifies the channel controller of return to service. Perform the following procedure to return to service: (1) Press CALL key to bring up SELECT REQUEST TYPE display. (2) Select RETURN TO SERVICE and press ENT. (3) A Status report B RCCOW is sent to the channel controller. t. In 25-kHz UHF AC DAMA, an AN/PRC-117F terminal user can page up to three other terminals. Paging is available only in 25-kHz AC DAMA. Using organization network planners, determine the procedures on responding to pages. See Figure C-10. Perform the following procedure to page: (1) Press CALL key to bring up service request screen of SELECT REQUEST TYPE. (2) Select PAGE and press ENT. C-24
- Page 43 and 44: Radio Item AN/PRC-117F III-2 Table
- Page 45 and 46: III-4 d. AN/ARC-231. (See Appendix
- Page 47 and 48: III-6 i. USC-42(V)1, 2, 3 (mini-DAM
- Page 49 and 50: III-8 Table III-2. OW Key Positions
- Page 51 and 52: . User requirements— (1) Azimuth
- Page 53 and 54: (6) Logging out. (a) For 5-kHz DAMA
- Page 55 and 56: Spectrum Manager MARFORLANT; MARFOR
- Page 57 and 58: Appendix A SATELLITE CHANNEL AUTHOR
- Page 59 and 60: Table A-1. Satellite Channel (Home
- Page 61 and 62: Table A-1. Satellite Channel (Home
- Page 63 and 64: Appendix B Information Request Code
- Page 65 and 66: Table B-1. Information Request Code
- Page 67 and 68: Table B-1. Information Request Code
- Page 69 and 70: Table B-1. Information Request Code
- Page 71 and 72: Table B-2. Configuration Codes Conf
- Page 73 and 74: C-2 Option Table C-2. MIL-STD 188-1
- Page 75 and 76: C-4 Table C-4. UHF SATCOM Programmi
- Page 77 and 78: pointing using the SATCOM receive s
- Page 79 and 80: 5. AN/PSC-117F DAMA UHF SATCOM a. U
- Page 81 and 82: C-10 Table C-7. DAMA Programming Ch
- Page 83 and 84: C-12 Table C-8. DAMA Net Preset Par
- Page 85 and 86: C-14 Figure C-6. DAMA Port Configur
- Page 87 and 88: C-16 Figure C-7. DAMA Destination P
- Page 89 and 90: h. Passive ranging and ephemeris da
- Page 91 and 92: (c) Select the destination to be ca
- Page 93: • ACTIVE—Service request has be
- Page 97 and 98: communications. Slower data rate li
- Page 99 and 100: (d) Select the desired DAMA net by
- Page 101 and 102: completion of the communications. P
- Page 103 and 104: C-32 Figure C-12. MSG Service Call
- Page 105 and 106: C-34 Figure C-14. DAMA Service Stat
- Page 107 and 108: 1. Line of Sight (LOS) Operations A
- Page 109 and 110: k. Enter channel number (009 to 239
- Page 111 and 112: GUARD LIST VIEW 1 64000 ------ ----
- Page 113 and 114: (13) For DASA only, enter time requ
- Page 115 and 116: Message Action A Acquisition Failed
- Page 117 and 118: Message Action Aborted To:xxxx (Rea
- Page 119 and 120: Table D-7. Hot Keys, 5-kHz DAMA Key
- Page 121 and 122: (9) Enter configuration code, if re
- Page 123 and 124: (1) Select over-the-air, if the ter
- Page 125 and 126: 25-kHz AD HOC DAMA SETUP GUIDE - AN
- Page 127 and 128: 5C/D RADIOS 1. The following are re
- Page 129 and 130: Table D-8. 5-kHz DAMA Operations (S
- Page 131 and 132: Table D-8. 5-kHz DAMA Operations (S
- Page 133 and 134: E-2 d. Programming operating modes.
- Page 135 and 136: (12) After pushing the variable pos
- Page 137 and 138: d. radio. Prior to COLD START, pres
- Page 139 and 140: aa. INTKG should flash. Leave as is
- Page 141 and 142: 1. Skyfire Operator Training Append
- Page 143 and 144: The following message appears- F-2
Figure C-9. DAMA 25-kHz AC Call Menu<br />
C-23
Change language