uhf tacsat /dama multi-service tactics, techniques ... - UHF-Satcom.com

B-6
Table B-1. Information Request Codes
Note: If action states contact NCTAMS – the RSSCs may be contacted for assistance.
Code Condition Action
94 Unable to connect parties from different
channels (JMINI sends).
OR
Unable to perform frequency switch
required for this connection (DAMA SAC
sends).
Frequency switching is required to
connect the requested service, but
frequency switching cannot be
accomplished for any of the following
reasons:
• Terminal or terminals that must switch
• Communications and orderwire
channels are not on the same satellite.
• Required frame segment on the
communications and orderwire channels
match.
• Frame timing for the channels may not
be aligned
95 JMINI sends.
Demand assigned activation disabled for
this guard.
This network is activated on a
preassigned basis only. In order for a
user to activate this network, the national
military strategy network management
system operator must check the "Allow
User to Activate" box in the network
definition.
95 DAMA SAC sends.
DASA requests are reserved for guards
only.
The requesting user’s configuration code
indicates a DASA service and the user
have requested connection to another
user or users. Configuration codes 98
and 99 are reserved for DASA services
and only private guards can be assigned
to DASA channels.
Requested a service with a terminal and/or
network address assigned to a different home
channel. Currently, there is no capability to
assign the terminal a different home channelIf
authorized to talk within this network, check
current mode screen to ensure it is set up for
the correct home channel. If not, send an out
of service, make changes or select correct
preset, reenter the DAMA mode on the correct
channel and set up service again.
The JMINI database marked the net guard
address wrong. Contact NCTAMS to correct
the error.
Should not receive this code—contact
NCTAMS.
96 No DASA channel available. Should not receive this code—contact
NCTAMS.