uhf tacsat /dama multi-service tactics, techniques ... - UHF-Satcom.com

(1) On = Activates guard receiver.
(2) Off = Deactivates guard receiver.
(3) Emergency = Disables guard receiver and tunes main receiver to guard
channel.
STEP 1. Press NEXT (P/N) ↓ to scroll down menu to guard field.
STEP 2. Rotate selector control knob to select On, Off, or Emergency.
F-8
LOS-P01 Sq- -30
TK 01 AM VINSN V16K
R378.050 T378.050
GUARD: ON
S/G M/Z D/D P/N X/E
STEP 3. Press ENTER (X/E) ↓.
STEP 4. Begin communications.
11. SATCOM Operations
a. Preset operation.
Note: Unless stated otherwise, all switches and controls called out in this
procedure are on the control indicator (CI). It is assumed proper
COMSEC key material is loaded and system is initialized in PT mode.
STEP 1. Set mode switch on fill panel to CT.
STEP 2. With cursor in the display mode field, rotate selector control knob to
SATCOM and press ENTER (X/E) ↓.
STEP 3. Rotate selector control knob for desired preset (01 to 20) and press ENTER
(X/E) ↓. Radio reconfigures.
SATCOM-P01 Rx-CT-120
TK 01 FSK VINSN V16K
CHANNEL NUMBER: 100
R295.975 T262.375
S/G M/Z D/D P/N X/E
STEP 4. Begin communications.
b. Manual operation.
Note: For manual operation, simply make desired changes to CURRENT MODE
menu (for example, transmit power, channel number, and so forth.). After
making changes, the preset “—P” field changes to “—M” to indicate
manual operation.
STEP 1. Press PREVIOUS/NEXT (P/N) ↓↑ to move to desired field(s) for changes.