uhf tacsat /dama multi-service tactics, techniques ... - UHF-Satcom.com

(3) DAMA CALL REQUEST
(4) CH PREC = ROUTINE
(5) PORT INTKG OR XMODE appears
(6) Use INTKG, press the down arrow button
(7) CALL PREC: ROUTINE appears (This is the call precedence. Press the
down arrow button.)
(8) CONFERENCE CALL? Yes or No
(9) USER 1
(10) Enter the NET number. Press the down arrow button.
(11) Radio emits RCCOW and displays if it is or is not connected.
(12) If the menu states the RCCOW NACKED, go back to the REQUEST CALL
menu and reinitiate.
(13) After completing the use of the circuit, press the ESC or the up arrow
button and scroll until the EXIT PRESET is displayed and press number 4.
8. Fill Procedures Using A KYX-15
a. On the KYX-15, select the desired key to be loaded (1 to 16), then set the switch
to the LD position. On the radio, enter and verify on the display the proper storage
location for the variable. Press and release the STO/RCL button on the radio set’s
keypad and the lamp on the KYX-15 flashes when the button is pressed. The message
KG FILL IN PROGRESS is displayed. To verify correct transfer of the variable,
disconnect the KYX-15. If the fill completed successfully, the message KG FILL
SUCCESSFUL is displayed.
b. Continue with the operating procedures.
9. Key Variable Zeroization
See section 3 above.
E-9