uhf tacsat /dama multi-service tactics, techniques ... - UHF-Satcom.com
uhf tacsat /dama multi-service tactics, techniques ... - UHF-Satcom.com
uhf tacsat /dama multi-service tactics, techniques ... - UHF-Satcom.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
GUARD LIST<br />
VIEW<br />
1 64000 ------ -----<br />
4 ----- ------ -----<br />
7 ----- ------ -----<br />
10 ----- ------ -----<br />
13 ----- ------ -----<br />
Note: 64000 is an<br />
example only. Do<br />
not enter it as a<br />
default setting.<br />
c. Perform the following procedure to enter a DAMA preset.<br />
(1) Press ESC until the main menu is displayed.<br />
(2) Press 3 (set presets).<br />
(3) Press 1 (set mode presets).<br />
(4) Select DAMA..<br />
(5) Enter preset number (1 to 6).<br />
SET PRESET<br />
DAMA -P#<br />
TEK# PSK ANDVT V2400<br />
5 KHz Tpwr 35 dbm<br />
Note: Modulation is not selectable.<br />
(6) Enter the COMSEC key number (1 to 5).<br />
(7) Select encryption type (ANDVT, 3KG-84, 4KG-84).<br />
(8) Select mode (V or D).<br />
(9) Select data rate (75 to 2400).<br />
(10) Select DAMA type (5-kHz).<br />
(11) Enter/select power level (23 to 43 dBm).<br />
(12) Enter channel number (129 to 191, 194 to 239). Corresponding frequencies are<br />
displayed on the next line.<br />
Channel Number: ###<br />
R###.### T###.###<br />
Code:## OW:CT<br />
Normal Range: Active<br />
(13) Enter configuration code.<br />
(14) Select orderwire encryption (PT or CT).<br />
(15) Select mode of operation (normal, EMCON, silent).<br />
(16) Select ranging (passive, active, maintenance).<br />
(17) If passive ranging, enter satellite number (1 to 8).<br />
(18) For 5-kHz DAMA, select log in (preassigned, over-the-air).<br />
(19) If preassigned, select precedence (FO, F, I, P, R).<br />
D-5