Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Step #1:<br />
Paint your paper roll with your green paint. You may need more than one coat, depending<br />
on the thickness of your paint. Set is aside to dry.<br />
Step #2:<br />
Get a piece of white paper and fold it in two. Cut a circle out of the paper, leaving a small<br />
section uncut so the two circles stay attached.<br />
Draw two black pupils in the center of each.<br />
Step #3:<br />
Pick a color of pipe cleaner. Cut out one long length and two short lengths.<br />
Make the long length into a figure 8, then attach the two shorter lengths to either side of<br />
the “8” (the top and bottom of the 8).<br />
Step #4:<br />
Grab a piece of green paper (to match the color of your paper roll). Cut out two hand<br />
shapes.<br />
Make sure these shapes are proportional to the size of your paper roll.<br />
Step #5:<br />
With more construction paper you are now going to make the book for your bookworm.<br />
Cut out a rectangle for the cover (in the color of your choice), cut out two smaller<br />
rectangles from white paper for the pages of your book.<br />
Step #6:<br />
Glue these all together at the folds of the papers. Be sure the colored paper is on the<br />
outside and the paper inside.<br />
Step #7:<br />
Grab your two green hands we cut in step 4, glue one hand on each side of the book.<br />
Set this aside to dry.<br />
Step #8:<br />
Now, once your paper roll is dry, glue on the eyes you made in step 2.<br />
Underneath the eyes, use your black marker to draw a mouth and a tiny nose.