ClearPath IX Systems Installation and Configuration Guide

Installing Windows NT Server, Enterprise Edition (ES5044R, ES5085R, and
ES2024R)
4. Type Y (yes) and press Enter. The drive geometry is now 8GB.
5. Press Esc twice to quit the BIOS Option Utility.
A message appears:
The system will restart.
Press any key to continue.
6. Press Enter and let the system reboot.
Watch the messages on the screen for the ALT-R prompt.
7. Press Alt-R to start the Mylex RAID EzAssist utility.
An EzAssist Menu for configuring RAID logical arrays appears as follows:
----EzAssist Menu----
Configure RAID Drive
View or Modify Controller Configuration
Perform Administration on...
Rescan for New Devices
Advanced Options
8. Use the arrow keys to select the Configure RAID Drive option, then press Enter.
A Configuration Method menu appears:
------Configuration Method-----
Automatic
Assisted
Custom
Note: Unless noted otherwise, use the arrow keys to select menu options
throughout the rest of this procedure.
9. If there are no disks to configure, return to the EzAssist menu (step 7) and select
Advanced Options; then select “clear configuration.” You will then be able to
configure the RAID drive.
10. Select Automatic, then press Enter.
The RAID Configuration Summary window appears:
RAID Configuration Summary
Logical Drive 0
Fault Tolerance: Yes
Spare: No
Optimization: Performance
Logical Drive Count: 1
Total Capacity: 17.0 GB
Chan: 10 Vendor Model Version Capacity (GB) Status
1:00 UNISYS ....... 17.0 Online
1:01 UNISYS ....... 17.0 Online
7850 5104–009 Version 009B (Web Only) 4–5