24.12.2012 Views

ClearPath IX Systems Installation and Configuration Guide

ClearPath IX Systems Installation and Configuration Guide

ClearPath IX Systems Installation and Configuration Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Installing Windows 2000 Advanced Server (ES5044R, ES5085R, <strong>and</strong> ES2024R)<br />

i. Click Next.<br />

A screen appears with the next configurable device: the IBM Netfinity Fault<br />

Tolerance PCI Adapter. The following default components are checked:<br />

• Client for Microsoft Networks<br />

• File <strong>and</strong> Print Sharing for Microsoft Networks<br />

• Internet Protocol (TCP/IP)<br />

Continue by configuring the Netfinity card:<br />

j. Select File <strong>and</strong> Print Sharing <strong>and</strong> click Properties.<br />

A Server Optimization box appears.<br />

k. Select Balance, then click OK.<br />

l. Click Internet Protocol (TCP/IP) to highlight it, then click Properties.<br />

m. Click “Use the following IP address.”<br />

n. In the IP Address field, enter the IP address for the Windows 2000 Advanced node<br />

from Table 2–2, then press Tab.<br />

o. Change the subnet mask to the netmask address from Table 2–2, or skip this field<br />

(accept the default).<br />

p. If you have a gateway (router), tab to the Default Gateway field <strong>and</strong> type the<br />

gateway address from Table 2–2.<br />

q. Click Advanced <strong>and</strong> add any additional gateway entries that the site requires.<br />

r. If the site chooses to implement WINS, click the WINS tab (otherwise skip this<br />

step), then enter WINS information as follows:<br />

1) Click Add <strong>and</strong> type the address from Table 2–2. Click Add again.<br />

2) Enter any additional IP addresses from Table 2–2.<br />

s. Click the DNS tab.<br />

t. If the site has any DNS servers, click Add (otherwise skip this step). In the<br />

window that appears, enter the IP address for the first DNS server from Table 2–2;<br />

then click Add again.<br />

u. If applicable, click Add <strong>and</strong> enter any additional DNS servers.<br />

v. Click to uncheck “Register the connections added in DNS.”<br />

w. Leave the default selections for the DNS suffix as they are. (“Append<br />

primary…<strong>and</strong> append parent….”)<br />

x. Click OK.<br />

y. Click OK.<br />

z. Click Next.<br />

13. A Workgroup or Computer Domain screen identifies the host name of the Windows<br />

2000 node <strong>and</strong> asks whether the node is to participate in a workgroup or domain.<br />

Proceed as follows:<br />

a. Click No.<br />

7850 5104–009 Version 009B (Web Only) 3–25

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!