24.12.2012 Views

ClearPath IX Systems Installation and Configuration Guide

ClearPath IX Systems Installation and Configuration Guide

ClearPath IX Systems Installation and Configuration Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Installing Windows 2000 Advanced Server (ES5044R, ES5085R, <strong>and</strong> ES2024R)<br />

8) Click Next.<br />

A screen appears with the next configurable device: the Intel(R)82559 Fast<br />

Ethernet LAN.<br />

d. Click Internet Protocol (TCP/IP) to highlight it, then click Properties. Configure<br />

the Fast Ethernet network adapter card as follows:<br />

1) Click “Use the following IP address.” In the IP Address field enter the IP<br />

address for the Windows 2000 Advanced node from Table 2–2, then press Tab.<br />

2) Change the subnet mask to the netmask address from Table 2–2, or skip this<br />

field (accept the default).<br />

3) If you have a gateway (router), tab to the Default Gateway field <strong>and</strong> type the<br />

gateway address from Table 2–2. This completes the entering of IP address<br />

information.<br />

4) Click Advanced <strong>and</strong> add any additional gateway entries that the site requires.<br />

5) If the site chooses to implement WINS, click the WINS tab (otherwise skip this<br />

step), then do the following to enter WINS information:<br />

a) Click Add <strong>and</strong> type the address from Table 2–2. Click Add again.<br />

b) Enter any additional IP addresses from Table 2–2.<br />

6) Click the DNS tab.<br />

7) If the site has any DNS servers, click Add (otherwise skip this step). In the<br />

window that appears, enter the IP address for the first DNS server from Table<br />

2–2; then click Add again.<br />

8) If applicable, click Add <strong>and</strong> enter any additional DNS servers.<br />

9) Click to uncheck “Register the connections added in DNS.”<br />

10) Leave the default selections for the DNS suffix as they are. (“Append<br />

primary…<strong>and</strong> append parent….”)<br />

11) Click OK.<br />

12) Click OK.<br />

13) Click Next.<br />

Skip to step 13.<br />

ES5085R server:<br />

The detected device is the Intel[R] PRO/100+ Dual Port Server Adapter #2. These<br />

default components are checked:<br />

• Client for Microsoft Networks<br />

• File <strong>and</strong> Print Sharing for Microsoft Networks<br />

• Internet Protocol (TCP/IP)<br />

You may change these selections as desired. Click components to check or uncheck<br />

them. By default, this adapter is not used by <strong>ClearPath</strong>.<br />

Continue customizing the ES5085R as follows:<br />

3–22 Version 009B (Web Only) 7850 5104–009

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!