ClearPath IX Systems Installation and Configuration Guide

Configuring the FDDI Interconnect
4. Make Host LAN Controller-2 (HLC-2) connections by selecting the Subsystem option
from the System_Connect menu. Then select the HLC-2 to which to make each FDDI
connection. This screen appears as follows:
The HLC-2 Subsystem Connections
HLC-2.FDDIVI
F1 = Help, F2 = Choices, F5 = Parameters, Enter = Choose F12 = Done
5. In that screen, define the channels to which the HLC-2 is connected and specify the
contents of the HLC-2 cabinet as shown in the following screen:
The HLC-2 Subsystem Connections
CU Cabinet Containees
I0CH00 I0CH01
0 0
CU1:FDDIVI
CU2:(optional, your choice)
Tab, Shift/Tab, Esc = Discard Screen Changes, F12 = Done
6. Modify the HLC-2 subsystem media access control (MAC) address and channel address
configuration parameters as appropriate as shown in the following screen. The MAC
address can be read from the HLC-2 maintenance panel menu.
D–4 Version 009B (Web Only) 7850 5104–009