ClearPath IX Systems Installation and Configuration Guide
ClearPath IX Systems Installation and Configuration Guide ClearPath IX Systems Installation and Configuration Guide
Tables of Documentation, Support, and Migration A–10 Version 009B (Web Only) 7850 5104–009
Appendix B Communication Settings Specific to ClearPath IX This appendix describes ClearPath Enterprise Server IX specific communication settings including • Internal FDDI Interconnet IP addresses used by server components, depending on the server configuration (Table B–1). These addresses cannot be used otherwise by customer sites. • TSAM configuration values (Table B–2). • Sample default contents of a hosts file (/etc/hosts) (Example B–1). Caution Integration Expert configuration assistants define the values in Table B–1 by default. ClearPath does not function properly if those values are not used. Note: Other predefined IP addresses and host names also are used, in addition to those listed in Table B–1, whenever a ClearPath IX server is configured as a private network without connection to a public network (see 2.4.2). Table B–1. IP Addresses and Host Names Used by the Private FDDI Interconnect FDDI IP Address Product FDDI Host Name 192.168.57.1 Windows NT/2000 server node 1 fddinttp 192.168.57.2 fddintul 192.168.57.3 fddintsr 192.168.57.21 Windows NT/2000 server node 2 fdd2nttp 192.168.57.22 fdd2ntul 192.168.57.23 fdd2ntsr 192.168.57.41 Windows NT/2000 server node 3 fdd3nttp continued 7850 5104–009 Version 009B (Web Only) B–1
- Page 335 and 336: Verifying the Interconnects and Ach
- Page 337 and 338: Verifying the Interconnects and Ach
- Page 339 and 340: Verifying the Interconnects and Ach
- Page 341 and 342: Verifying the Interconnects and Ach
- Page 343 and 344: Verifying the Interconnects and Ach
- Page 345 and 346: Verifying the Interconnects and Ach
- Page 347 and 348: Section 15 Installing the Remaining
- Page 349 and 350: 15.2.2. Setting Up the TIP Environm
- Page 351 and 352: APP 3 ROLLBACK INITIALIZATION START
- Page 353 and 354: INAP3 MAX PAGES Installing the Rema
- Page 355 and 356: Section 16 Customizing the Site Cus
- Page 357 and 358: Customizing the Site 1. Copy the ne
- Page 359 and 360: Customizing the Site 5. Verify your
- Page 361 and 362: Customizing the Site A dialogue box
- Page 363 and 364: Customizing the Site lan-address la
- Page 365 and 366: 14. Select the Changes menu bar ite
- Page 367 and 368: Customizing the Site b. Select CP_U
- Page 369 and 370: Customizing the Site l. Repeat thes
- Page 371 and 372: 16.6. Testing TCP/IP Communications
- Page 373 and 374: Customizing the Site ClearPath IX50
- Page 375 and 376: Section 17 Installing Optional OS 2
- Page 377 and 378: Appendix A Tables of Documentation,
- Page 379 and 380: Major Hardware or Software Changes
- Page 381 and 382: Major Hardware or Software Changes
- Page 383 and 384: Intel Platform Tables of Documentat
- Page 385: Tables of Documentation, Support, a
- Page 389 and 390: Communication Settings Specific to
- Page 391 and 392: Appendix C SPO/HMP IX Interface Lic
- Page 393 and 394: SPO/HMP IX Interface License Key Re
- Page 395 and 396: Appendix D Configuring the FDDI Int
- Page 397 and 398: INVENTORY_INCLUDE: Limited Comprehe
- Page 399 and 400: The HLC-2 Subsystem Connections FDD
- Page 401 and 402: Appendix E Installing OPE and SysAd
- Page 403 and 404: Glossary A ACID properties The esse
- Page 405 and 406: Glossary central electronics comple
- Page 407 and 408: CSIOP D DAC daemon datagram See cha
- Page 409 and 410: DSA DSPER DTP DUA See directory ser
- Page 411 and 412: H HBA Abbreviation for host bus ada
- Page 413 and 414: Glossary Integration Expert The onl
- Page 415 and 416: Glossary master configuration table
- Page 417 and 418: N NAS NetBIOS See network access se
- Page 419 and 420: Glossary Open/OLTP Pathway An Open/
- Page 421 and 422: Glossary processing complex cabinet
- Page 423 and 424: Glossary SCO UnixWare A popular ver
- Page 425 and 426: Glossary Software Controlled Perfor
- Page 427 and 428: Glossary token ring A type of local
- Page 429 and 430: Glossary URM policy Parameters set
- Page 431 and 432: WWW X X.400 X.500 X/Open See World
- Page 433 and 434: Bibliography 2200 Series Single Poi
- Page 435 and 436: Bibliography OS 2200 Communications
Appendix B<br />
Communication Settings Specific to<br />
<strong>ClearPath</strong> <strong>IX</strong><br />
This appendix describes <strong>ClearPath</strong> Enterprise Server <strong>IX</strong> specific communication settings<br />
including<br />
• Internal FDDI Interconnet IP addresses used by server components, depending on the<br />
server configuration (Table B–1). These addresses cannot be used otherwise by<br />
customer sites.<br />
• TSAM configuration values (Table B–2).<br />
• Sample default contents of a hosts file (/etc/hosts) (Example B–1).<br />
Caution<br />
Integration Expert configuration assistants define the values in Table B–1 by<br />
default. <strong>ClearPath</strong> does not function properly if those values are not used.<br />
Note: Other predefined IP addresses <strong>and</strong> host names also are used, in addition to those<br />
listed in Table B–1, whenever a <strong>ClearPath</strong> <strong>IX</strong> server is configured as a private network<br />
without connection to a public network (see 2.4.2).<br />
Table B–1. IP Addresses <strong>and</strong> Host Names Used by the Private FDDI<br />
Interconnect<br />
FDDI IP Address Product FDDI Host<br />
Name<br />
192.168.57.1 Windows NT/2000 server node 1 fddinttp<br />
192.168.57.2 fddintul<br />
192.168.57.3 fddintsr<br />
192.168.57.21 Windows NT/2000 server node 2 fdd2nttp<br />
192.168.57.22 fdd2ntul<br />
192.168.57.23 fdd2ntsr<br />
192.168.57.41 Windows NT/2000 server node 3 fdd3nttp<br />
continued<br />
7850 5104–009 Version 009B (Web Only) B–1
Change language