ClearPath IX Systems Installation and Configuration Guide

Installing Optional OS 2200 Software from the Package Tapes
3. Because the tape is unlabeled, enter any reel number. Also enter the parameters to
indicate that the tape is to be assigned as a temporary unlabeled file (TJ) and to
indicate the type of cartridge device on which the tape is to be mounted (for example,
HICL or HIC51).
The following message is displayed:
n Enter reel number
n
4. Press Enter to select the default and mount the key tape in the specified drive.
Loading begins, and you are prompted to verify that the unlabeled tape you mounted is
the correct reel.
LOAD CPKEY T40Z0 NORING PP$TAPE - 1 REGPKG
(LOAD CPKEY )(ANY UNASSIGNED CT0899 )
n ANSWER WITH REEL NO ON T40Z0 E,REEL
n CPKEY
The following message appears to indicate that the key tape is registered:
REGPKG FIN
17.2. Product Installation Documentation
Once you have registered the key tape (17.1), you can install optional products or product
features from the package tapes. For information about product interdependencies and
installation procedures, refer to the following documents:
• ClearPath Enterprise Servers Software Products Installation Guide
• ClearPath HMP IX and 2200 Systems Software Planning and Migration Overview.
• Individual product documents (for example, the SCO UnixWare Installation
Handbook).
17–2 Version 009B (Web Only) 7850 5104–009