ClearPath IX Systems Installation and Configuration Guide

Customizing the Site
b. Click the value in the Timeout Period column for the new Intel node name.
A window appears for you to enter the new timeout value.
c. Change the timeout value to 0 (this disables the timeout feature), then click Enter
or OK.
d. Repeat this process for each Intel node and for the renamed SPO server, then
close the Edit UNIX Systems window.
5. Customize 2200 node partitions and OS 2200 system console representations as
follows:
a. In the TopCluster window menu, click Delete, then select the OS 2200 Systems
option.
A window appears, listing the currently configured 2200 node partitions.
b. Select the 2200 partition you want to rename, then click OK.
The 2200 partition is now removed from the configuration.
c. In the TopCluster window menu click Add, then select the OS 2200 Systems
option.
A window for entering the new system appears.
d. Enter the site-defined name of the 2200 node partition, then select OK.
The node is added to the TopCluster diagram (note that the system does not have
a console icon connected at this time).
e. Position the icon where you want it by clicking the icon once, then clicking the
desired position once in the TopCluster window. X and Y coordinates can be
further adjusted by entering coordinates through the Edit Icon Placement window
(the original 2200 node icons were located at X=300,700 and Y=150).
f. In the TopCluster window menu, click Delete, then select the OS 2200 Consoles
option.
A window listing the currently configured 2200 system consoles appears.
g. Select the OS 2200 console, then click OK.
The system console is removed from the configuration.
h. In the TopCluster window menu, click Add, then select the OS 2200 Consoles
option.
A window for entering the new console appears.
i. Enter the site-defined name of the OS 2200 console, then select OK.
The console is added to the TopCluster diagram. A window asks you to identify
the OS 2200 partition to which the console should be connected.
j. Click the name of the new OS 2200 partition (from step d), then select OK.
The console now shows a connection to the new OS 2200 partition.
k. Position the icon where you want it by clicking the icon once, then clicking the
desired position once in the TopCluster window. X and Y coordinates can be
further adjusted by entering coordinates through the Edit Icon Placement window
(the original OS 2200 console icons were located at X=300,700 and Y=350).
16–14 Version 009B (Web Only) 7850 5104–009