ClearPath IX Systems Installation and Configuration Guide

Installing and Configuring SPO Workstation Software
A Start Copying Files window appears.
m. Click Next
The installation continues, and a Setup Complete window appears.
n. Click Finish.
Close Windows Explorer and any windows created by the setup program.
Continue by changing the default Windows password (11.14.3); then proceed to Section 12.
11.15. Logging On to the Windows Workstation
This section describes how to log on to Windows 2000 and Windows NT and how to
change the default password for either Windows 2000 or Windows NT.
11.15.1. Logging On to the Windows 2000 (Professional)
Workstation as the Administrator
Whenever you restart or power on the SPO workstation during installation, if the
workstation is running Windows 2000, the Log On to Windows 2000 window appears. Take
the following steps to log on:
Notes:
• The logon information is case-sensitive.
• If the SPO workstation is part of a domain, you must also enter a domain name.
1. In the logon window, verify that the name in the user-name text box is administrator.
If it is not, enter administrator (deleting any existing user name).
2. In the password text box, enter administrator (the default installation password),
unless you have already changed the password from the default. In that case, enter the
site-specific password.
3. Click OK.
The Welcome to Windows 2000 screen appears on the desktop.
11.15.2. Logging On to the Windows NT Workstation as the
Administrator
Whenever you restart or power on the SPO workstation during installation, if the
workstation is running Windows NT, the Windows NT logo appears and you are prompted
to press Ctrl-Alt-Del to log on. Take the following steps to log on:
Notes:
• The logon information is case-sensitive.
• If the SPO workstation is part of a domain, you must also enter a domain name.
7850 5104–009 Version 009B (Web Only) 11–39