ClearPath IX Systems Installation and Configuration Guide

Installing and Configuring SPO Workstation Software
4. Click I Agree.
You are asked to select the type of ControlIT environment to install. Select Install
Non-Managed Viewer and Host Components.
5. Click Next.
The Installation Wizard screen appears. Make sure Install Agent Viewer is checked
and Install Agent Host is not checked. Under Setup Options, select Advanced.
6. Click Next.
A screen for installing Unicenter TNG Framework appears.
7. Click Next.
The Change Preferences screen appears.
8. Click OK.
A Select Destination Directory screen appears.
9. Click Next to accept the default.
A screen for creating program icons appears.
10. Click Next.
A Ready to Install message appears.
11. Click Finish.
When the installation finishes, click OK.
The following message appears:
Your system must be restarted. Restart now?
12. Remove the CD-ROM from the drive unit, then click Yes.
13. Set the Windows NT path to ControlIT as follows:
a. Click Start, Settings, then Control Panel.
The Control Panel window appears.
b. Double-click the System icon.
c. Click the Environment Tab.
The System Properties window appears.
d. Click Path in the list of system variables.
e. In the Value field, go to end of path and type the following:
;C:\ControlIT
f. Click SET, then click OK to exit.
14. Reboot the SPO workstation.
Continue by installing Winsock RSHD/NT (11.7.3).
11–24 Version 009B (Web Only) 7850 5104–009