ClearPath IX Systems Installation and Configuration Guide

Installing and Configuring SPO Workstation Software
Table 11–1. SPO Workstation Installation Checklist
√ Media or Information Required
Information needed:
IP address _____________________________
Determine the IP address of the Windows NT workstation.
Subnet mask or 255.255.255.0_____________________________
Determine the netmask address, if applicable.
Primary WINS server address _____________________________
Determine the IP address of the primary WINS server, if applicable.
Secondary WINS server address _____________________________
Determine the IP address of the secondary WINS server, if applicable.
Domain name _____________________________
Determine the domain name the site uses for DNS, if applicable.
IP address for DNS _____________________________
Determine the IP address or addresses for as many domain name servers as the site has.
Date/Time Properties screen; Time Zone tab screen
Time zone at the site _____________________________
Daylight saving time: If daylight saving time is being used, check the check box provided on the
Time Zone tab screen.
11.2. Installing Network Services on the Windows NT Workstation
Media needed: Windows NT Workstation CD-ROM—labeled “Microsoft Windows NT Workstation”
11.3. Installing the Latest Service Pack for Windows NT Workstation 4.0
Media needed: Windows NT Service Pack CD-ROMs, numbered 1–n
11.4. Installing Y2K Service Packs on the Windows NT Workstation
Media needed: Windows NT Service Pack CD-ROM
11.6. Installing the Video Driver on the Windows NT Workstation
Media needed: ATI Installation CD-ROM International
11.7.1. Installing and Configuring XVision on the Windows NT Workstation
Media needed: SCO XVision CD-ROM—labeled “SCO Vision 2K”
continued
7850 5104–009 Version 009B (Web Only) 11–5