ClearPath IX Systems Installation and Configuration Guide

Installing SPO Basic Edition and Related Software
Figure 10–2. System Console F3 Utilities Session Menu
Take the following steps.
Note: Switch the monitor concentrator to the first system console position (see 2.5.2).
1. On the system console, press F3 to activate the Utilities menu (Figure 10–2).
2. Select Optional Features and press Enter.
A list of utilities appears, similar to the list in the right-hand panel of Figure 10–2.
3. Select SP Interface Utility and press Enter. An Execute box appears.
4. Press Enter. The Single Point Interface Utility Session window appears (Figure 10–3).
5. Press Esc to get the menu bar and use the arrow keys to select the Hosts File menu bar
item. A list of options appears as follows:
Load
Save
Edit
6. Press Enter to select the Load option. A form appears for selecting the media (see
Figure 10–4).
? Exit Hosts File Routers Subnetwork Changes
Session x - SP Interface Utility
Console [console] [network] Host host device SP Interface [status]
SP Operations Role Status Previous Status
network - name master connection - status Previous - connection - status
network - name master connection - status Previous - connection - status
network - name master connection - status Previous - connection - status
Figure 10–3. Single Point Interface Utility Session Window
7850 5104–009 Version 009B (Web Only) 10–21