ClearPath IX Systems Installation and Configuration Guide

Installing SPO Basic Edition and Related Software
10.11. Installing SPO Basic Edition Software
To install SPO Basic Edition software and related online documentation, take the following
steps at the SPO server:
1. Log on as the root user (user-id root) in character mode (10.15.3).The pound sign (#)
prompt appears indicating that you are the root user.
2. Put the SPO Basic Edition CD-ROM (labeled “SPO/HMP Console for UnixWare
Software level 6.1CP”) in the drive unit of the SPO server.
3. Enter the following command:
pkgadd -d cdrom1 spo-cp.61
A prompt to insert the CD-ROM appears:
Insert CD into SCSI CD-Rom Drive 1.
Type [go] when ready,
or [q] to quite: (default:go)
4. Press Enter.
The installation script now prompts you for the following information to which you
can respond by pressing the Enter key to accept the default:
• The directory where you want to install SPO software (default is /opt/SPO).
• The directory where you want to store your SPO log files (default
is/var/opt/SPO_Log).
• The directory where you want to store your site-dependent data (default is
/var/opt/spo).
In addition, the script automatically configures the following information:
• The Single Point Operations administrator logon name (spadmin).
• The group name for the installation files (spo).
• The operator name for users of SPO Basic Edition (spoper).
After configuring this information, the installation script displays your entries and asks
you to confirm them.
5. Press Enter to confirm your selections.
You are prompted for an administrator password.
Note: The prompts for administrator and operator passwords appear only on
initial installation when the spadmin and spoper user-ids are added to the
system.
6. Type unisys12 and press Enter.
You are prompted for an operator password.
7. Type unisys12 and press Enter.
The script now installs the software according to the information provided and
displays a message when done.
8. Remove the CD from the CD-ROM drive.
7850 5104–009 Version 009B (Web Only) 10–19