ClearPath IX Systems Installation and Configuration Guide

About This Guide
Purpose
Scope
This guide (previously titled ClearPath HMP IX Series Installation and Configuration
Guide) summarizes how to install, configure, and activate the Integrated Operating
Environment (IOE) software for a Unisys e-@ction ClearPath Enterprise Server IX.
Note: This guide contains all information available at the time of publication. The
most recent version of this document is provided in PDF format at this Web site:
http://public.support.unisys.com/os1/txt/web-verity?type=list
Technical corrections not yet incorporated into the Web update are available in
problem list entry (PLE) 17506285. This PLE will be updated as necessary to
reflect the rapid rate of change for Intel configurations. Please monitor the PLE
for the most recent information. Your Unisys representative can provide you
with a copy of the PLE.
This guide describes how to install and configure the following software:
• These operating systems, on Intel nodes of a ClearPath IX server:
− Windows 2000 Advanced Server
− Windows NT Server 4.0
− Windows NT Server, 4.0 Enterprise Edition
− SCO UnixWare 7
• OS 2200 and related IOE software on 2200 nodes
• Single Point Operations Basic Edition for ClearPath IX and related display and control
software that allows full control and monitoring of nodes from a single workstation
Certain Unisys product names have changed, and the new names appear throughout this
guide. These are the name changes:
Previous Name New Name
Open Application Development Environment
(OADE)
PathMate Integration Expert
Programmer’s Workbench for ClearPath OS
2200
continued
7850 5104–009 Version 009B (Web Only) xxi