ClearPath IX Systems Installation and Configuration Guide
ClearPath IX Systems Installation and Configuration Guide ClearPath IX Systems Installation and Configuration Guide
Installing SPO Basic Edition and Related Software The entry appears in the /etc/hosts Configuration. Repeat steps 8(a) through 8(c) for each additional console, workstation, and Intel node. 9. To modify an entry, do the following: a. Click the entry to highlight it, then click the Modify button. A Modify Entry window appears. b. Change the fields as needed. c. Click OK. Repeat steps a through c as needed. 10. To delete an entry, do the following: a. Click the entry to highlight it. b. Click the Delete button. 11. Click OK to close the /etc/hosts Configuration window. 12. Click the Host menu and select Exit from the pull-down menu to close the Network Client Manager window. 13. Click the file menu and select Exit from the pull-down menu to close the System Administration window. 14. If you changed the node name of the SPO server, enter the following commands to rebuild the kernel and reboot the system: /etc/conf/bin/idbuild init 6 Continue with the steps in 10.2.4. 10.3.4. Changing the Date and Time Zone Follow these steps to change the date and time zone. 1. If you are not already logged on, log on in graphical mode (10.15.2). 2. Open the SCO Admin window. 3. Scroll to the System folder and double-click. 4. Double-click System Time Manager. 5. Click Host. 6. Click Change Time Zone. 7. Select the appropriate country and time zone and click OK. 8. After reading the time zone change message, click OK. 9. Click Host. 10. Click Set Time. 11. Enter the correct time and date. Click OK. 10–6 Version 009B (Web Only) 7850 5104–009
Installing SPO Basic Edition and Related Software 12. Click OK when the message appears saying the system time will change. 13. In the upper left-hand side of the window, click Host. 14. Click Exit. 15. In the SCO Admin window, click File and then Exit. Continue by following the procedure in 10.12 to create a 2200-console hosts-file diskette. 10.4. Installing UnixWare 7.1.1 on the SPO Server If you are required to install the UnixWare operating system, enter the information shown in Table 10–2 in response to disk slicing prompting messages. Table 10–2. Boot Disk (Disk 0) Required Configuration Values File System Description Type Size / Root File System vxfs Remaining space /dev/swap Swap Slice slice /stand Boot File System bfs /usr usr File System off /home User File System vxfs /dev/dump Dump Slice off /var Add-ons File System off /home2 Second User File System /tmp Temporary File System vxfs 2048 MB memfs 100MB /dev/volprivate Private Volume slice 1 /var/tmp Temporary File System ALTS TABLE Alt/Sector Slice slice memfs 50 MB 7850 5104–009 Version 009B (Web Only) 10–7
- Page 191 and 192: 7.1.16. Installing ess Software Com
- Page 193 and 194: Completing Windows Installation An
- Page 195 and 196: Completing Windows Installation Whe
- Page 197 and 198: Completing Windows Installation 5.
- Page 199 and 200: Completing Windows Installation A s
- Page 201 and 202: Section 8 Installing UnixWare 7 Thi
- Page 203 and 204: Table 8-1. UnixWare 7 Installation
- Page 205 and 206: 8.2. Steps to Take If Software Is P
- Page 207 and 208: 8.3. Configuring the RAID Controlle
- Page 209 and 210: Installing UnixWare 7 7. Use the ar
- Page 211 and 212: Installing UnixWare 7 17. Change th
- Page 213 and 214: 5. Kill Drive 6. Backup/Restore Con
- Page 215 and 216: Installing UnixWare 7 9. Select the
- Page 217 and 218: Installing UnixWare 7 6. Select the
- Page 219 and 220: Installing UnixWare 7 • Var File
- Page 221 and 222: Installing UnixWare 7 39. Press any
- Page 223 and 224: 8.4.3. Installing the Drivers Updat
- Page 225 and 226: Installing UnixWare 7 12. Enter the
- Page 227 and 228: Installing UnixWare 7 3. Insert the
- Page 229 and 230: 8.9. Retrieving and Applying Fixes
- Page 231 and 232: Installing UnixWare 7 Console outpu
- Page 233 and 234: Installing UnixWare 7 • Use the u
- Page 235 and 236: Section 9 Installing the ClearPath
- Page 237 and 238: Section 10 Installing SPO Basic Edi
- Page 239 and 240: Installing SPO Basic Edition and Re
- Page 241: Installing SPO Basic Edition and Re
- Page 245 and 246: Installing SPO Basic Edition and Re
- Page 247 and 248: Installing SPO Basic Edition and Re
- Page 249 and 250: Installing SPO Basic Edition and Re
- Page 251 and 252: Installing SPO Basic Edition and Re
- Page 253 and 254: Installing SPO Basic Edition and Re
- Page 255 and 256: Installing SPO Basic Edition and Re
- Page 257 and 258: Installing SPO Basic Edition and Re
- Page 259 and 260: Installing SPO Basic Edition and Re
- Page 261 and 262: Installing SPO Basic Edition and Re
- Page 263 and 264: Installing SPO Basic Edition and Re
- Page 265 and 266: 2. At the password prompt, enter un
- Page 267 and 268: Section 11 Installing and Configuri
- Page 269 and 270: SPO Server SPO Basic Edition SPO Wo
- Page 271 and 272: Installing and Configuring SPO Work
- Page 273 and 274: Installing and Configuring SPO Work
- Page 275 and 276: Installing and Configuring SPO Work
- Page 277 and 278: Installing and Configuring SPO Work
- Page 279 and 280: Installing and Configuring SPO Work
- Page 281 and 282: • RPC configuration • Server
- Page 283 and 284: Installing and Configuring SPO Work
- Page 285 and 286: Installing and Configuring SPO Work
- Page 287 and 288: • Installing the SPO Basic Editio
- Page 289 and 290: Installing and Configuring SPO Work
- Page 291 and 292: Installing and Configuring SPO Work
Installing SPO Basic Edition <strong>and</strong> Related Software<br />
12. Click OK when the message appears saying the system time will change.<br />
13. In the upper left-h<strong>and</strong> side of the window, click Host.<br />
14. Click Exit.<br />
15. In the SCO Admin window, click File <strong>and</strong> then Exit.<br />
Continue by following the procedure in 10.12 to create a 2200-console hosts-file diskette.<br />
10.4. Installing UnixWare 7.1.1 on the SPO Server<br />
If you are required to install the UnixWare operating system, enter the information shown<br />
in Table 10–2 in response to disk slicing prompting messages.<br />
Table 10–2. Boot Disk (Disk 0) Required <strong>Configuration</strong><br />
Values<br />
File System Description Type Size<br />
/ Root File System vxfs Remaining<br />
space<br />
/dev/swap Swap Slice slice<br />
/st<strong>and</strong> Boot File System bfs<br />
/usr usr File System off<br />
/home User File System vxfs<br />
/dev/dump Dump Slice off<br />
/var Add-ons File System off<br />
/home2 Second User File<br />
System<br />
/tmp Temporary File<br />
System<br />
vxfs 2048 MB<br />
memfs 100MB<br />
/dev/volprivate Private Volume slice 1<br />
/var/tmp Temporary File<br />
System<br />
ALTS TABLE Alt/Sector Slice slice<br />
memfs 50 MB<br />
7850 5104–009 Version 009B (Web Only) 10–7
Change language