ClearPath IX Systems Installation and Configuration Guide

Installing SPO Basic Edition and Related Software
The entry appears in the /etc/hosts Configuration.
Repeat steps 8(a) through 8(c) for each additional console, workstation, and Intel
node.
9. To modify an entry, do the following:
a. Click the entry to highlight it, then click the Modify button.
A Modify Entry window appears.
b. Change the fields as needed.
c. Click OK.
Repeat steps a through c as needed.
10. To delete an entry, do the following:
a. Click the entry to highlight it.
b. Click the Delete button.
11. Click OK to close the /etc/hosts Configuration window.
12. Click the Host menu and select Exit from the pull-down menu to close the Network
Client Manager window.
13. Click the file menu and select Exit from the pull-down menu to close the System
Administration window.
14. If you changed the node name of the SPO server, enter the following commands to
rebuild the kernel and reboot the system:
/etc/conf/bin/idbuild
init 6
Continue with the steps in 10.2.4.
10.3.4. Changing the Date and Time Zone
Follow these steps to change the date and time zone.
1. If you are not already logged on, log on in graphical mode (10.15.2).
2. Open the SCO Admin window.
3. Scroll to the System folder and double-click.
4. Double-click System Time Manager.
5. Click Host.
6. Click Change Time Zone.
7. Select the appropriate country and time zone and click OK.
8. After reading the time zone change message, click OK.
9. Click Host.
10. Click Set Time.
11. Enter the correct time and date. Click OK.
10–6 Version 009B (Web Only) 7850 5104–009