ClearPath IX Systems Installation and Configuration Guide

Completing Windows Installation
8. Enter a value equal to the maximum size listed, then click OK.
9. (ES2045R only) You receive a warning message that the partition may not be
accessible to some operating systems, and you are asked to confirm. Click Yes.
10. Right-click the unformatted segment of Disk 0 to present the menu.
11. Left-click “Commit changes now.”
12. Click Yes.
13. Click OK to continue.
14. Right-click the same unformatted segment of Disk 0 again.
15. Left-click “Assign drive letter.”
16. Specify F as the new drive letter, then click OK.
17. Click Yes to the message asking if you want to continue.
18. Right-click the same unformatted segment of Disk 0 again.
19. Left-click Format.
20. Select NTFS file system, and the default allocation size.
21. Click Start, then OK.
Disk formatting proceeds.
22. Click OK, then Close.
23. (ES2045R and DR/2 only) Right-click CD-ROM and assign drive letter D.
Note: Drive letter D may already be assigned. If it is, skip steps 25 through 27.
24. Right-click CD-ROM 0.
25. Left-click Assign Drive Letter.
26. Specify D as the assigned drive letter and click OK.
27. Close the Disk Administrator window.
Continue by reapplying the latest service pack (7.1.15).
7.1.15. Reapplying the Latest Service Pack
The final configuration step is to reapply the service pack. This subsection gives the
procedure.
Notes:
• For the DR/2, this is the first installation of the service pack. For the ES5085R,
ES5044R, ES2024R, and ES2045R, it is a reinstallation.
• The service pack medium supplied provides 40-bit security only. If your site
requires 128-bit security, download it from the Microsoft Web site.
• If you have an Install icon for Service Pack n, you can double-click the icon instead
of using the CD to install the service pack.
7850 5104–009 Version 009B (Web Only) 7–17