ClearPath IX Systems Installation and Configuration Guide

SCSI 0, Bus 1, Id 5, Lun 0 ARCHIVE PYTHON 02779-XXX
10. Click OK, then close the Backup window.
11. Remove the CD-ROM from the drive.
Continue with the steps in 7.1.11.
7.1.11. Setting Balanced Server Priorities
Completing Windows Installation
To set up the Windows NT node for balanced file and application server priorities, take the
following steps:
1. If you are not currently logged on, power on or restart the Windows NT node and log
on as the administrator.
2. Click Start > Settings > Control Panel.
3. Double-click the Network icon.
4. Click the Services tab, and in the window that opens set the properties as follows:
a. Click the Server line to select it.
b. Click Properties.
c. Click the Balance option to select it.
d. Click OK to apply the selection and close the window.
5. In the Network window, click Close to apply the changes and close the window.
6. Close the Control Panel window.
7. Click YES to reboot the server.
Continue by configuring the FTP service (7.1.12).
7.1.12. Configuring the FTP Service
To configure the the FTP service, take the following steps:
1. If you are not currently logged on, power on or restart the Windows NT node and log
on as the administrator.
2. Click Start > Programs > Microsoft Internet Server (common) > Internet Services
Manager.
3. In the Computer column, double-click the icon associated with the FTP service (FTP
listed in Service column).
A tabbed FTP Service Properties screen opens.
4. Click the Directories tab and configure access as follows:
a. Select the drive:\InetPub\ftproot (alias ) directory by clicking on it. The
drive may be C or D.
b. Click Edit Properties.
7850 5104–009 Version 009B (Web Only) 7–15