ClearPath IX Systems Installation and Configuration Guide

Completing Windows Installation
3. Click Next to Internet Explorer Active Setup.
A License Agreement screen appears.
4. Click Accept and then click Install.
A prompt appears, asking whether you want to select which Internet Explorer
components are installed.
5. Select Standard Installation and click Next..
A prompt appears, asking whether you want to install the Windows Desktop update.
Select No and click Next.
6. For the Active Channel selection, scroll to the top and select NONE. Click Next.
7. Click Next for Default Folder Location.
8. When Internet Explorer Active Setup has finished installing components, click OK to
finish the installation.
9. Remove the CD-ROM and click OK to restart your computer.
10. When the reboot is complete, log on as the administrator again. Microsoft Internet
Explorer Setup runs.
A window saying Welcome to Windows NT appears.
11. Close the Welcome - Microsoft Internet Explorer window.
Depending on your server, continue with the steps in 7.1.8 (ES2045R, ES5085R, or
ES2024R) or 7.1.9 (DR/2).
7.1.8. Installing the Active Server Pages Upgrade for IIS
(ES2045R, ES5085R, or ES2024R)
Follow these steps to install the Active Server Pages update for IIS with Windows NT
Server, Enterprise Edition (ES2045R, ES5085R, or ES5024R):
1. If you are not currently logged on, power on or restart the Windows NT node and log
on as the administrator.
2. Click Start, then select Programs > Administrative Tools > Enterprise Edition Installer.
A Microsoft Windows NT Server, Enterprise Edition Installer window appears.
Note: If Enterprise Edition Installer is not present, do the following:
a. Click Start, then select Run.
b. Type the following command.
NHLOADER
c. Click OK.
3. Click Continue.
4. Highlight the following (but do not check the box):
Internet Information Server 3.0 Upgrade
7850 5104–009 Version 009B (Web Only) 7–11