ClearPath IX Systems Installation and Configuration Guide

Completing Windows Installation
4. In the dialog box type the following, then click OK:
A:setup
A Welcome screen appears.
5. Click Next.
A user information window appears.
6. Click Next.
After you have reviewed the ReadMe information, close this window.
7. Select Power Console PLUS and click Next.
8. Select Standalone and click Next.
9. It is OK to install to the default directory. Click Next.
10. It is OK to use the default program folder. Click Next.
11. When prompted, insert disk 2 and click OK.
The Setup Complete window appears.
12. Click Finish, then remove the diskette.
13. Right-click on the MegaRAID taskbar icon and click Close.
You can now run the Power Console PLUS utility software when desired by selecting Start,
Programs, MegaRaid, then MegaRAID Power Console.
Note: You cannot back up the MegaRAID configuration, but you can print a listing of
the configuration for future reference. Run the RAID utility software, then click
the printer icon under Configuration.
Installing and Configuring RAID for an ES5044R, ES5085R, ES2045R, or
ES2024R Node
These are the steps for installing and configuring the Global Array Manager (GAM) utility
software for the ES5044R, ES5085R, ES2045R, or ES2024R, servers, using the Mylex
eXtremeRAID 1100 Controller.
1. If you are not currently logged on, power on or restart the Windows NT node and log
on as administrator.
2. Insert the CD labeled "Mylex Solutions Software Kit x.xx" into the CD-ROM drive.
A Mylex Solutions window appears.
3. Click Install Global Array Manager
A Welcome window appears.
4. Click Next.
A Select Components window appears.
5. Click Global Array Manager Client and Server for installation. Click Next.
A Choose Destination Folder window appears.
7–8 Version 009B (Web Only) 7850 5104–009