ClearPath IX Systems Installation and Configuration Guide

6.5. Logging On As the Administrator
Installing Windows NT Server 4.0 (DR/2)
Caution
To prevent unauthorized access to the Windows NT node following initial
installation, the site must change the default password (administrator) to a
different password.
Whenever you restart or power on the Windows NT node during installation, the Windows
NT Server logo appears and you are prompted to press Ctrl-Alt-Del to log on. Take the
following steps to log on:
Notes:
• The logon information is case-sensitive.
• If the Windows NT node is part of a domain, you must also enter a domain name.
1. Press Ctrl-Alt-Del.
A logon screen appears.
2. Enter the following information on that screen:
a. User name—Enter administrator.
b. Press the Tab key to advance to the password field.
c. Password—Enter administrator (the installation password).
d. Click OK.
A Welcome to Windows NT window appears.
3. Close the welcome window.
Following logon, you can complete Windows NT installation as described in Section 7.
7850 5104–009 Version 009B (Web Only) 6–23