ClearPath IX Systems Installation and Configuration Guide

• Communications
Installing Windows NT Server 4.0 (DR/2)
• Multimedia
Note: You can also select Windows Messaging and Games if the site wishes.
11. Click Next to proceed.
The Windows NT Setup screen indicates that installing Windows NT networking is
about to begin.
12. Click Next to proceed to the next screen.
A screen appears with the option Computer will Participate in Network selected. The
following check boxes also appear:
• Wired to the network
• Remote access to the network
13. Select Wired to the network, then click Next.
A screen appears with a check box labeled Install Microsoft Internet Information
Server already checked.
14. Click Next.
A screen for selecting network adapters appears.
15. Select network adapters as follows:
a. Click Select from list.
Scroll to the SysKonnect SK-NET FDDI PCI adapter.
b. Click OK.
c. Click Select from list.
d. Click Have disk.
e. Insert the following diskette in the drive:
NT 4.0 Supplemental Driver disk 02 of 03
You will be asked for the path name of the driver. Enter A:\Intelpro
f. Click OK.
The window should now display the selected item:
Intel Ether Express Pro Adapter
g. Click OK.
Both adapters should now be listed.
h. Click Next.
A Network Protocols screen appears.
Note: The only required protocol is the TCP/IP protocol. The NWLink IPX/SPX
compatible transport and NetBEUI Protocol are not required for initial
installation, but they may be selected if required by the site.
16. Click NWLink IPX/SPX compatible transport to deselect it.
7850 5104–009 Version 009B (Web Only) 6–17