ClearPath IX Systems Installation and Configuration Guide

Installing Windows NT Server 4.0 (DR/2)
Table 6–1. Windows NT Server 4.0 Installation Checklist
√ Media or Information Required
6.5. Installing and Configuring Windows NT Server 4.0
Media needed:
• Setup diskettes—labeled “Microsoft Windows NT Server Setup Disk x” (where x is 1, 2, and 3)
• Windows NT CD-ROM—labeled “Microsoft Windows NT Server”
• RAID drivers diskette—labeled “NT 4.0 Supplemental Drivers Diskette"
• Video drivers diskette—labeled “NT 4.0 Supplementary Drivers Diskette”
• Blank 3-1/2 inch diskette (label this diskette “Emergency Repair Disk”)
• DR/2 drivers diskette—labeled “Mylex Solution Software Kit 2.01 NT/NW Drivers Diskette"
6.5.2. Configuring Windows NT Server 4.0
Information needed:
Name and Organization screen
Name __________________________
Determine the name the site wants identified with the Windows NT node (for example, the
administrator’s name or the Windows NT owner name).
Organization _____________________________
Determine the organization name the site wants identified with the Windows NT node.
Registration screen
CD-KEY ______________________________________
To register Windows NT, you need the key number printed on a label on the back of the Windows
NT CD-ROM jewel case or on the Certificate of Authentication.
SNMP Properties screen
System administrator name __________________________
Phone number __________________________
Location (room number) __________________________
Date/Time Properties screen; Time Zone tab screen
Time zone at the site _____________________________
Daylight saving time: If daylight saving time is being used, check the check box provided on the
Time Zone tab screen.
7850 5104–009 Version 009B (Web Only) 6–3