ClearPath IX Systems Installation and Configuration Guide

Installing Windows NT Server, Enterprise Edition (ES2045R)
17. Click Next.
A screen for selecting Network services appears. The following networking
components are listed in the list box by default:
• Microsoft Internet Information Server 2.0
• Remote procedure call (RPC) configuration
• Network Basic Input/Output System (NETBIOS) Interface
• Workstation
• Server
In addition, the following network services also are required:
• Simple TCP/IP service
• Simple Network Management Protocol (SNMP) service (the SNMP agent package
is needed for SysAdmin).
18. Add the additional services to the list as follows:
a. Click Select from list . . .
b. Scroll down the list of services (use the scroll bar) and highlight Simple TCP/IP
Service.
c. Click OK.
The service is added to the list of services already in the list box.
d. Repeat steps a, b, and c for SNMP Service.
e. Review the list of services to ensure that it contains the following:
• Microsoft Internet Information Server 2.0
• Remote procedure call (RPC) configuration
• Network Basic Input/Output System (NETBIOS) Interface
• Workstation
• Server
• Simple TCP/IP service
• SNMP service
f. Click Next to proceed.
A Windows NT Server Setup screen indicates that Windows NT is now ready to install
networking components.
19. Click Next.
A screen for setting FDDI parameters appears.
20. Click Continue to accept the defaults.
Intel PROSet adapter information is displayed.
7850 5104–009 Version 009B (Web Only) 5–21