24.12.2012 Views

ClearPath IX Systems Installation and Configuration Guide

ClearPath IX Systems Installation and Configuration Guide

ClearPath IX Systems Installation and Configuration Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Installing Windows NT Server, Enterprise Edition (ES2045R)<br />

Then the following message appears:<br />

Windows NT Server Setup<br />

=======================<br />

Please insert the disk labeled<br />

SYMBIOS PCI HIGH PERFORMANCE DRIVER<br />

into Drive A:<br />

*Press ENTER when ready<br />

22. Insert the diskette labeled “DRIVER-SDMS PCI SCSI NT 896 Driver,” then press Enter<br />

to continue.<br />

Setup begins copying files. When the files are copied, a message asks you to remove<br />

the diskette in preparation for rebooting.<br />

23. Remove the diskette <strong>and</strong> the CD-ROM from the drives, then press Enter.<br />

Two reboots occur. First Windows NT boots using the file allocation table (FAT) file<br />

system. Then the FAT file system is converted to the desired NTFS <strong>and</strong> Windows NT<br />

reboots again.<br />

Following reboot, the Windows NT Setup GUI screen appears. Continue by configuring<br />

Windows NT as described in 5.4.2.<br />

5.4.2. Configuring Windows NT Server, Enterprise Edition<br />

Note: This procedure follows immediately after, <strong>and</strong> is continuous with, the<br />

installation procedure in 5.4.1.<br />

After the Windows NT operating system reboots (5.4.1), a Windows NT Setup screen<br />

appears with a message box saying to insert the Windows NT CD-ROM. Take the<br />

following steps:<br />

1. Insert the Windows NT CD-ROM (labeled “Microsoft Windows NT Server Disc 1”) into<br />

the drive, then click OK.<br />

If you click OK before the drive is ready, a prompt indicates files are needed from the<br />

Windows NT Server CD-ROM. A scroll box identifies the directory from which they<br />

will be copied. Click OK in the box if this occurs.<br />

After a few seconds, a Windows NT Setup screen indicates that setup includes<br />

• Gathering information about your computer<br />

• Installing Windows NT networking<br />

• Finishing setup<br />

2. Click Next to proceed to the next screen.<br />

A Name <strong>and</strong> Organization screen appears.<br />

3. Enter the name <strong>and</strong> organization responsible for the node as follows:<br />

a. Name field—Enter the name of the person responsible for the node.<br />

b. Press the Tab key to advance to the Organization field.<br />

c. Organization field—Enter the organization responsible for the Windows NT node.<br />

5–18 Version 009B (Web Only) 7850 5104–009

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!