ClearPath IX Systems Installation and Configuration Guide

Contents
Section 12. Configuring Intel Nodes for Monitoring by SPO
12.1. Starting the Single Point Configuration Routine ....... 12–1
12.2. Creating a Custom SPO Basic Edition
Configuration ......................................................... 12–2
12.3. Configuring and Installing the URM Agent for the
SPO Server and UnixWare Nodes ......................... 12–4
12.4. Transferring the SPO Windows Agent ....................... 12–6
12.5. Configuring Windows Intel Nodes for ControlIT ......... 12–7
12.6. Exiting from the Single Point Configuration Routine . 12–8
12.7. Starting Normal SPO Console Operations ................. 12–8
12.8. Installing the SPO Windows Agent ............................. 12–11
12.9. Running the Console Output Redirection Script ........ 12–12
Section 13. Installing the Basic OS 2200 IOE
13.1. Read-and-Reply Message Format ............................. 13–2
13.2. Performing the Initial Boot ........................................ 13–3
13.2.1. Initial Boot Steps If Boot Partition Is Not Activated ... 13–3
13.2.2. Initial Boot Steps If Partition Is Up and Exec Is
Running ........................................................... 13–4
13.2.3. Completing the Boot Procedure ............................. 13–4
13.3. Installing Products from Tape HMP-FLD ................... 13–6
13.4. Establishing the Performance Level (IX6000,
IX5000, and IX4800 Servers Only) ....................... 13–7
13.5. Installing Products from Tape HMP-OE1 ................... 13–9
Section 14. Verifying the Interconnects and Achieving
Hardware RFU
14.1. Verifying Interconnect Communications ................... 14–2
14.2. Installing Microcode .................................................. 14–2
14.2.1. Installing HLC-2 Microcode .................................... 14–3
14.2.2. Installing Channel Adapter Microcode (CSIOP) ......... 14–4
14.3. Installing the CC or CEC Tape ................................... 14–6
x Version 009B (Web Only) 7850 5104–009