ClearPath IX Systems Installation and Configuration Guide
ClearPath IX Systems Installation and Configuration Guide ClearPath IX Systems Installation and Configuration Guide
Installing Windows NT Server, Enterprise Edition (ES2045R) MegaRAID BIOS Configuration Utility Ver 1.20 Oct 10, 1995 Adapter-1 ID 0 1 2 3 4 5 6 6 Logical Drives Configured LD RAID Size #Stripes #StrpSz Drive-State 1 1 4096 2 8KB OPTIMAL Logical Drive 1 RAID=1 Size = 4096 Advanced Menu Accept Choose RAID Level For This Logical Drive Use cursor keys to navigate, ENTER to select an option and ESC to go back Figure 5–2. Logical Drives Configured Screen 11. Select RAID= in the Logical Drive 1 menu, then press Enter. A list of available RAID levels appears. 12. Select RAID level 1, then press Enter. Note: Do not change any settings in the Advanced Menu. The default parameters are acceptable for RAID level 1. 13. Select Accept, then press Enter (press Enter twice). The Logical Drives Configured window shows the configuration (Figure 5–2). The following prompt appears: Save Configuration? YES NO 14. Highlight YES, then press Enter. The configuration is saved. 15. Press Enter. 16. Press Esc to return to the Management Menu. 5–12 Version 009B (Web Only) 7850 5104–009 4 5 6
Installing Windows NT Server, Enterprise Edition (ES2045R) 17. Select Initialize, then press Enter. A screen appears showing the logical drives configured. Also, a Logical Drives menu appears as follows: ----Logical Drives---- Logical Drive 1 18. Press the space bar to select Logical Drive 1 (if it is not already selected), then press F10 to initialize it. Note: When selected, the highlighted color switches from gray to yellow. The following prompt appears: ----Initialize Drives?---- YES NO 19. Select YES, then press Enter. A bar graph message shows progress of the initialization (takes about 15 minutes). 20. When initialization is complete, press any key to continue. The logical drives configured screen reappears. 21. Press the Esc key twice to exit. The following prompt appears: --EXIT?-- YES NO 22. Select YES, then press Enter. The following prompt appears: Configuration has changed. Press Ctrl-Alt-Del to reboot. 23. Before pressing Ctrl-Alt-Del to reboot, insert the Windows NT Setup diskette 1 and the Windows NT CD-ROM Disc 1 in the drives. 24. Press Ctrl-Alt-Del to reboot. 7850 5104–009 Version 009B (Web Only) 5–13
- Page 83 and 84: Installing Windows 2000 Advanced Se
- Page 85 and 86: Installing Windows 2000 Advanced Se
- Page 87 and 88: Installing Windows 2000 Advanced Se
- Page 89 and 90: Installing Windows 2000 Advanced Se
- Page 91 and 92: Installing Windows 2000 Advanced Se
- Page 93 and 94: Installing Windows 2000 Advanced Se
- Page 95 and 96: Section 4 Installing Windows NT Ser
- Page 97 and 98: Installing Windows NT Server, Enter
- Page 99 and 100: Installing Windows NT Server, Enter
- Page 101 and 102: Installing Windows NT Server, Enter
- Page 103 and 104: Installing Windows NT Server, Enter
- Page 105 and 106: Installing Windows NT Server, Enter
- Page 107 and 108: Installing Windows NT Server, Enter
- Page 109 and 110: Installing Windows NT Server, Enter
- Page 111 and 112: Installing Windows NT Server, Enter
- Page 113 and 114: Installing Windows NT Server, Enter
- Page 115 and 116: Installing Windows NT Server, Enter
- Page 117 and 118: Installing Windows NT Server, Enter
- Page 119 and 120: Installing Windows NT Server, Enter
- Page 121 and 122: Installing Windows NT Server, Enter
- Page 123 and 124: Section 5 Installing Windows NT Ser
- Page 125 and 126: Installing Windows NT Server, Enter
- Page 127 and 128: Installing Windows NT Server, Enter
- Page 129 and 130: Installing Windows NT Server, Enter
- Page 131 and 132: Installing Windows NT Server, Enter
- Page 133: ID 0 1 2 3 4 5 6 Installing Windows
- Page 137 and 138: Installing Windows NT Server, Enter
- Page 139 and 140: Installing Windows NT Server, Enter
- Page 141 and 142: Installing Windows NT Server, Enter
- Page 143 and 144: Installing Windows NT Server, Enter
- Page 145 and 146: Installing Windows NT Server, Enter
- Page 147 and 148: Installing Windows NT Server, Enter
- Page 149 and 150: Section 6 Installing Windows NT Ser
- Page 151 and 152: Installing Windows NT Server 4.0 (D
- Page 153 and 154: Installing Windows NT Server 4.0 (D
- Page 155 and 156: Installing Windows NT Server 4.0 (D
- Page 157 and 158: Installing Windows NT Server 4.0 (D
- Page 159 and 160: Installing Windows NT Server 4.0 (D
- Page 161 and 162: Installing Windows NT Server 4.0 (D
- Page 163 and 164: Installing Windows NT Server 4.0 (D
- Page 165 and 166: • Communications Installing Windo
- Page 167 and 168: Installing Windows NT Server 4.0 (D
- Page 169 and 170: Installing Windows NT Server 4.0 (D
- Page 171 and 172: 6.5. Logging On As the Administrato
- Page 173 and 174: Section 7 Completing Windows Instal
- Page 175 and 176: 7.1. Completing Windows NT Installa
- Page 177 and 178: Completing Windows Installation 14.
- Page 179 and 180: Completing Windows Installation To
- Page 181 and 182: Completing Windows Installation 6.
- Page 183 and 184: Completing Windows Installation 3.
Installing Windows NT Server, Enterprise Edition (ES2045R)<br />
17. Select Initialize, then press Enter.<br />
A screen appears showing the logical drives configured. Also, a Logical Drives menu<br />
appears as follows:<br />
----Logical Drives----<br />
Logical Drive 1<br />
18. Press the space bar to select Logical Drive 1 (if it is not already selected), then press<br />
F10 to initialize it.<br />
Note: When selected, the highlighted color switches from gray to yellow.<br />
The following prompt appears:<br />
----Initialize Drives?----<br />
YES<br />
NO<br />
19. Select YES, then press Enter.<br />
A bar graph message shows progress of the initialization (takes about 15 minutes).<br />
20. When initialization is complete, press any key to continue.<br />
The logical drives configured screen reappears.<br />
21. Press the Esc key twice to exit.<br />
The following prompt appears:<br />
--EXIT?--<br />
YES<br />
NO<br />
22. Select YES, then press Enter.<br />
The following prompt appears:<br />
<strong>Configuration</strong> has changed. Press Ctrl-Alt-Del to reboot.<br />
23. Before pressing Ctrl-Alt-Del to reboot, insert the Windows NT Setup diskette 1 <strong>and</strong> the<br />
Windows NT CD-ROM Disc 1 in the drives.<br />
24. Press Ctrl-Alt-Del to reboot.<br />
7850 5104–009 Version 009B (Web Only) 5–13
Change language