ClearPath IX Systems Installation and Configuration Guide

Installing Windows NT Server, Enterprise Edition (ES5044R, ES5085R, and
ES2024R)
4) If you have a gateway (router), click Advanced (otherwise skip this step) and
take the following steps:
a) Click Add.
b) In the New Gateway field, type the gateway address from Table 2–2.
c) Click Add.
The address appears in the Installed gateways: list box.
d) Repeat these steps for each additional gateway required, then click OK
when done.
d. If the site chooses to implement WINS, click the WINS Address tab (otherwise
skip this step), then enter the following WINS information:
Note: Be sure the Ethernet adapter is selected, and not the FDDI adapter.
WINS should not be used on the FDDI interconnect.
1) In the Primary WINS Server field, type the address from Table 2–2, then press
Tab.
2) If applicable, type the IP address of the Secondary WINS Server from Table
2–2.
e. Click the DNS tab and take the following steps:
1) Enter the IP address for the first DNS server from Table 2–2, if the site has any
DNS servers.
2) Click Add.
The DNS address is added to the search order list box.
3) Repeat these steps for each additional DNS server.
4) Enter a domain (Internet) name to which the server belongs, for proper
operation of the IIS services.
f. If you are installing an ES5085R, use the scroll bar to select the second port of the
Intel Ether Express Pro adapter Bus 3 slot 5 from the drop-down list of adapters.
Then repeat steps 25(c) through 25(e) above.
g. For both server types, click OK and continue with step 29 when finished.
29. Click YES.
A screen appears that allows you to confirm the network bindings.
30. Click Next to proceed.
A screen appears indicating that Windows NT is ready to start the network.
31. Click Next to proceed.
32. A setup screen identifies the host name of the Windows NT node and asks whether the
node is to participate in a workgroup or domain.
Click Workgroup, enter a workgroup name of CLEARPATH, then click Next to
proceed.
You can enter a different workgroup name if the client site requirements are different.
The Windows NT Setup screen indicates it is ready to finish the setup.
4–24 Version 009B (Web Only) 7850 5104–009