TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ...

J-8
x
25
SLSF-15: probe for slots. Max. depth: 15 mm
SLSF-10-1.5: probe for slots. Max. depth: 10 mm,
min. width: 1.5 mm
SLSF-20: probe for slots. Max. depth 20 mm
(on request)
Surface Roughness Testing
Ø8.0
X = 15 mm, type SLSF-15 No. 06960014
X = 10 mm, type SLSF-10-1.5 No. 06960015
X = 20 mm, type SLSF-20 No. 06960016
Additional accessories
max. 20 mm
LASF
RASF
26
Ø 3.5
LASF, angled, left-hand side model, 20 mm
RASF, angled, right-hand side model, 20 mm
LASF-10, angled, left-hand side model, 10 mm
(No. 06960019)
RASF-10, angled, right-hand side model, 10 mm
(No. 06960020)
7
Type LASF No. 06960017
Type RASF No. 06960018
06960021 29935 EX100 Extension, 100 mm (for STS probe only)
06960022 29936 RS-3 Roughness specimen, nominal value Ra = 3 μm, 3% (as standard)
06960023 29937 RS-0.8 Reference specimen, nominal value Ra = 0.7-0.8 μm, 8%
06960024 29938 RSGM Roughness specimen in glass, nominal value Ra = 0.5-2.5 μm
06960025 29939 RSGH Roughness specimen in glass, nominal value Ra > 2.51 μm
06960026 29976 RSGL Roughness specimen in glass, nominal value Ra < 0.49 μm
06960027 29977 MESU Measuring support, complete with granite plate
06960028 29978 AMU Adapter for both S and SF drive units
06960029 29979 CP90 Connector, 90°
06960030 29980 PR-20 Thermal paper roll, 20 items
AMU
MESU
300
ca. 75
195
Ø 8
250 (optional 500)