TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ...
TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ... TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ...
8 1 25 Ø3.5 Probe for measuring concave or convex surfaces (radius from 3 mm, lc = 0.08 mm, lt = 0.48 mm) 4.5 Surface Roughness Testing Ø 8 Type CCS No. 06960004 Type SLS No. 06960005 27.0 Ø3.5 Ø 8 15 4 27 Ø3.5 Probe for measuring grooves (with contact skids for depth up to 15 mm) 2 27 10 Ø4.3 ca. 1.5 Standard probe Probe for checking gear tooth flanks (module from 1,5) Ø 3.5 27 Type STS No. 06960006 Type TFS No. 06960007 Ø 7.0 90 18 S / SF Type TRS No. 06960008 Transverse probe 17 1 8 9 13 Tangent from 4 mm diameter Ø3.5 28 ca. 140 Type CBS No. 06960010 Ø8.0 Ø 8 b = 13 mm 22 Probe for depth measurement Ø3.5 ca. 128 Type BAS No. 06960009 Probes without contact skids (for use with the SF drive unit) Ø 8 1 Ø 3.5 Type AKSF No. 06960011 Type BOSF-1.5 No. 06960012 Type BOSF-1.0 No. 06960013 Transverse chisel probe. Measures small shafts (max. diameter: 1.0 mm), sharp edges etc. 1 / 0.6 26 Ø 3 BOSF-1.5: probe for small bores and gear tooth flanks, module from 0.75, 1.5 mm diameter BOSF-1.0: probe for small bores and gear tooth flanks, module from 0.5, 1.0 mm diameter 14 Ø 8 Ø 8 Ø 8 Ø 8 J-7
J-8 x 25 SLSF-15: probe for slots. Max. depth: 15 mm SLSF-10-1.5: probe for slots. Max. depth: 10 mm, min. width: 1.5 mm SLSF-20: probe for slots. Max. depth 20 mm (on request) Surface Roughness Testing Ø8.0 X = 15 mm, type SLSF-15 No. 06960014 X = 10 mm, type SLSF-10-1.5 No. 06960015 X = 20 mm, type SLSF-20 No. 06960016 Additional accessories max. 20 mm LASF RASF 26 Ø 3.5 LASF, angled, left-hand side model, 20 mm RASF, angled, right-hand side model, 20 mm LASF-10, angled, left-hand side model, 10 mm (No. 06960019) RASF-10, angled, right-hand side model, 10 mm (No. 06960020) 7 Type LASF No. 06960017 Type RASF No. 06960018 06960021 29935 EX100 Extension, 100 mm (for STS probe only) 06960022 29936 RS-3 Roughness specimen, nominal value Ra = 3 μm, 3% (as standard) 06960023 29937 RS-0.8 Reference specimen, nominal value Ra = 0.7-0.8 μm, 8% 06960024 29938 RSGM Roughness specimen in glass, nominal value Ra = 0.5-2.5 μm 06960025 29939 RSGH Roughness specimen in glass, nominal value Ra > 2.51 μm 06960026 29976 RSGL Roughness specimen in glass, nominal value Ra < 0.49 μm 06960027 29977 MESU Measuring support, complete with granite plate 06960028 29978 AMU Adapter for both S and SF drive units 06960029 29979 CP90 Connector, 90° 06960030 29980 PR-20 Thermal paper roll, 20 items AMU MESU 300 ca. 75 195 Ø 8 250 (optional 500)
- Page 1 and 2: J-2 TESA RUGOSURF 10G Surface rough
- Page 3 and 4: J-4 Surface Roughness Testing Summa
- Page 5: J-6 Technical Data Surface Roughnes
- Page 9 and 10: J-10 Surface Roughness Testing Pock
- Page 11 and 12: J-12 Battery Operated Surface Rough
8<br />
1<br />
25<br />
Ø3.5<br />
Probe for measuring concave or convex surfaces<br />
(radius from 3 mm, lc = 0.08 mm, lt = 0.48 mm)<br />
4.5<br />
<strong>Surface</strong> Roughness Testing<br />
Ø 8<br />
Type CCS No. 06960004 Type SLS No. 06960005<br />
27.0<br />
Ø3.5<br />
Ø 8<br />
15<br />
4<br />
27<br />
Ø3.5<br />
Probe for measuring grooves (with contact skids for<br />
depth up to 15 mm)<br />
2<br />
27<br />
10 Ø4.3<br />
ca. 1.5<br />
Standard probe Probe for checking gear tooth flanks<br />
(module from 1,5)<br />
Ø 3.5<br />
27<br />
Type STS No. 06960006 Type TFS No. 06960007<br />
Ø 7.0<br />
90<br />
18<br />
S / SF<br />
Type TRS No. 06960008<br />
Transverse probe<br />
17<br />
1<br />
8<br />
9<br />
13<br />
Tangent from 4 mm diameter<br />
Ø3.5<br />
28<br />
ca. 140<br />
Type CBS No. 06960010<br />
Ø8.0<br />
Ø 8<br />
b = 13 mm<br />
22<br />
Probe for depth measurement<br />
Ø3.5<br />
ca. 128<br />
Type BAS No. 06960009<br />
Probes without contact skids (for use with the SF drive unit)<br />
Ø 8<br />
1<br />
Ø 3.5<br />
Type AKSF No. 06960011 Type BOSF-1.5 No. 06960012<br />
Type BOSF-1.0 No. 06960013<br />
Transverse chisel probe. Measures small shafts<br />
(max. diameter: 1.0 mm), sharp edges etc.<br />
1 / 0.6<br />
26<br />
Ø 3<br />
BOSF-1.5: probe for small bores and gear tooth<br />
flanks, module from 0.75, 1.5 mm diameter<br />
BOSF-1.0: probe for small bores and gear tooth<br />
flanks, module from 0.5, 1.0 mm diameter<br />
14<br />
Ø 8<br />
Ø 8<br />
Ø 8<br />
Ø 8<br />
J-7