TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ...
TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ...
TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
J-6<br />
Technical Data<br />
<strong>Surface</strong> Roughness Testing<br />
Measured <strong>roughness</strong> parameters Ra, Rz DIN, Rmax, R3z, Rt, Rq RMS with output of the bearing portion<br />
curve tp<br />
Measuring ranges Ra, Rq 0 ÷ 20.00 μm 0 ÷ 800 µin<br />
Rz, Rmax, R3z, Rt 0 ÷ 200.0 μm 0 ÷ 2000 µin<br />
Resolution Ra, Rq 0.01 μm 1 µin<br />
Rz, Rmax, R3z, Rt 0.1 μm 1 µin<br />
Cut-off lc (mm) 0.08 0.25 0.8 2.5<br />
Traversing length lt (mm) 0.48 1.50 4.8 15.0<br />
Total length lm (mm) 0.4 1.25 4.0 12.5<br />
Roughness Gage Assembly<br />
1 2 3 4 5 6<br />
IBM PC 486<br />
6<br />
Ra 2.72 μm<br />
lt 0.8 lc 4.8<br />
<strong>RUGOSURF</strong> 100<br />
7 8 9 10 11<br />
3<br />
4<br />
Ø3.5 28<br />
Optional Accessories for <strong>RUGOSURF</strong> 100<br />
1 Mains adapter/Battery charger<br />
2 Cover plate<br />
3 Thermal paper<br />
4 <strong>RUGOSURF</strong> 100 housing<br />
5 STS standard probe<br />
6 Supporting shoe<br />
7 Computer (optional)<br />
8 Connection cable<br />
9 Setting screw (calibration)<br />
10 S (SF) drive unit<br />
11 Control button<br />
12 Auxiliary probes (optional)<br />
Probes with contact skids (for use with either of both S or SF<br />
drive units)<br />
Ø 8<br />
1<br />
Ø 6<br />
Ø2<br />
2<br />
15 10<br />
Type AKS No. 06960002 Type BOS No. 06960003<br />
Transverse chisel probe. Measures small shafts<br />
(max. diameter: 1.0 mm), sharp edges etc.<br />
Probe for measuring small shafts (with diameter<br />
from 2.5 mm)<br />
Ø3.5<br />
Ø 8
Change language