TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ...

J-12
Battery Operated
Surface Roughness Testing
Probe Variety
A variety of probes are easily interchangeable, increasing the gage’s capability
for a wide range of applications, such as flats, O.D.s, I.D.s (including small
bores), sharp edges, inside “O” ring grooves, short lands and shoulders.
Built-in Digital Output
With built-in digital output, the Pocket Surf gage
is designed for SPC applications and is compatible with most major SQC data
collection systems. Although it provides powerful flexibility for a portable surface
finish gage, the Pocket Surf gage uses a regular, consumer-type, 9 volt
alkaline battery. Data can be output through an RS-232 port and printed on a
Brown & Sharpe SPC printer.
Portable Vee Fixture
The Portable Vee Fixture simplifies the
measurement of small outside diameter
parts up to 1" (25mm). This optional
accessory comes complete with a
PS-145 setting pin.
599-4000-2421 26841
Swivel Fixture for Mounting on
Height Gage DP.
For added flexibility, the Swivel Fixture
allows the Pocket Surf to be moved
and locked into position at any angle.
Complete with a T-Bar attachment
fixture, the Swivel Fixture will work
with most standard column gages and
height stands.
599-4000-2500 26899
Height Stand
Compact and convenient, an optional
height stand with bracket is available as
a holding fixture for the Pocket Surf gage.
This optional accessory holds the Pocket
Surf both horizontally and vertically,
making it easy to take measurements
on a surface plate or on any suitable,
flat working surface.
599-4000-2496 26843
Height Stand with Swivel Fixture
For maximum convenience and flexibility,
purchase the Height Stand together
with the Swivel Fixture. This complete
set will give you a fully functional holding
fixture for your Pocket Surf gage, allowing
you to position the tool horizontally,
vertically, or at any angle in between.
599-4000-2596 88239
Built-in
Digital
Output