TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ...
TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ...
TESA RUGOSURF 10G Surface roughness gage TESA - Swiss ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
J-2<br />
<strong>TESA</strong> <strong>RUGOSURF</strong> <strong>10G</strong><br />
<strong>Surface</strong> <strong>roughness</strong> <strong>gage</strong><br />
<strong>TESA</strong> –TECHNOLOGY<br />
Genuine <strong>Swiss</strong> Made<br />
Quality<br />
<strong>RUGOSURF</strong> <strong>10G</strong> is a portable and versatile<br />
<strong>roughness</strong> <strong>gage</strong> that can be used in the<br />
workshop, for incoming inspection or in the<br />
laboratory. This heavy-duty hand-held tool<br />
offers a wide range of accessories and can<br />
be used in a number of applications that’s<br />
virtually unlimited.<br />
<strong>Surface</strong> Roughness Testing<br />
Technical Data<br />
Table of measured <strong>roughness</strong> parameters<br />
International Standards<br />
ISO 4287 Ra Rq Rt Rz Rp Rv Rc RSm Rδc Rpc<br />
1997 Rk Rpk Rvk Mr1 Mr2<br />
Pa Pq Pt Pp Pv Pc Psm Pδc Ppc<br />
Din Rmax R3z R3zm<br />
ISO 12085 R AR Rx Rke Rpke Ryke<br />
Measuring range 0 + 300 µm / 0 + 12 µin<br />
Resolution 0.005 µm / 0.02 µin<br />
Cut-offs (Ic in in) 0.01 in 0.03 in 0.1 in<br />
Total length<br />
(Im in in) 0.05 in 0.15 in 0.5 in<br />
Traversing length<br />
(Ic in in) 0.06 in 0.18 in 0.6 in<br />
Possible selection of 2,3,4 or 5 cut-offs<br />
for the measurement (length from 0.75 to 16 mm)
<strong>TESA</strong> RUGOSOFT <strong>10G</strong><br />
Order No. EDP No.<br />
06930011 24720<br />
<strong>Surface</strong> Roughness Testing<br />
<strong>TESA</strong> RUGOSOFT Software<br />
Complete with:<br />
- CD ROM for installation in 5 languages<br />
- RS 232 Connection Cable<br />
- On-line instruction Manual (included on installation CD)<br />
Order No. EDP No.<br />
06960034<br />
Optional Probes<br />
23126<br />
SB10 - For regular surface finish and bores.<br />
External diameters > .4"/10mm and internal diameters from 25"/6mm<br />
Order No. EDP No.<br />
06960036 23128<br />
SB20 - For slots with depths up to .2"/5mm max.<br />
Order No. EDP No.<br />
06960037 23129<br />
SB30 - For small bores with a 15"/4mm minimum diameter,<br />
.8"/20mm in depth.<br />
Order No. EDP No.<br />
06960038 23130<br />
SB40 - With a prismatic contact skid for<br />
measuring cables. External diameters > 04"/1mm.<br />
Order No. EDP No.<br />
06960039 231331<br />
SB50 - With front mounted contact skid for inspecting<br />
concave surfaces.<br />
Ideal for measuring through to 90°.<br />
Order No. EDP No. Price<br />
06960040 23132 $719.00<br />
Standard Accessories<br />
Support with Granite Base, 15.75" x 9.85" (400mm x 200mm)<br />
Order No. EDP No.<br />
06960035 23127<br />
Roughness Specimen, Ra = 117 µin/2.97 µm<br />
Order No. EDP No.<br />
06960041 23133<br />
External Control Switch<br />
Order No. EDP No.<br />
06960042 23134<br />
Additional accessories available upon request<br />
J-3
J-4<br />
<strong>Surface</strong> Roughness Testing<br />
Summary of Roughness Parameters<br />
Commonly Used<br />
Arithmetical mean deviation of the profile Ra (ISO 4287, DIN 4768)<br />
The arithmetical mean deviation Ra is the mean value of the absolute value<br />
of the profile departure y within the reference length l.<br />
Max. profile valley depth Rmax (DIN 4768)<br />
Among the existing single <strong>roughness</strong> depths Zi, the max. profile valley depth<br />
Rmax counts for the most significant within the total measuring length lm.<br />
According to ISO 4288 and DIN 4287 - Part 1, this parameter is also<br />
specified as Ry max.<br />
Mean <strong>roughness</strong> depth Rz DIN (DIN 4768)<br />
The mean <strong>roughness</strong> depth Rz is the arithmetical mean of the single <strong>roughness</strong><br />
depths of successive sampling lengths le.<br />
According to ISO 4287 and DIN 4762, the parameter Rz DIN is also<br />
specified as Ry5.<br />
Because Rz is named differently in DIN 4768 and ISO 4287, this para mater is<br />
also specified as Rz DIN or Rz ISO.<br />
When the parameter Rz is measured according to DIN, it is generally admitted<br />
that the extreme value ISO is also matched providing that<br />
Rz ISO is not exceeding Rz DIN .<br />
Application of Roughness Comparison Specimens<br />
These specimens for testing the surface finish quality have long proven their<br />
value in practical use.<br />
They serve for touch and/or sight comparisons with the surface of the workpieces<br />
that are manufactured using the same method. Condition is that<br />
materials have to be comparable.<br />
The comparison of the <strong>roughness</strong> of the<br />
workpiece surface is not quantitatively<br />
expressed. The extent to which the surfaces<br />
of both the specimen and the workpiece are<br />
matched is appreciated subjectively only.<br />
Sight comparison requires optimum light<br />
source angle. For small surfaces, the use of<br />
a magnifying glass with up to 8x magnification<br />
is recommended.<br />
Touch comparison is made using the finger<br />
nail or a small copper piece like a coin, for<br />
instance.<br />
Z1<br />
Pre-course<br />
Ie<br />
Z2<br />
l t<br />
Z3<br />
Rmax<br />
5 x l e = lm<br />
Z4<br />
Z5<br />
R a<br />
0<br />
y<br />
m<br />
Post-course<br />
l<br />
x
✓<br />
Probe system:<br />
Hall Effect<br />
Technology,<br />
analogue with high-linear<br />
output signal.<br />
90° diamond stylus,<br />
radius 5 μm<br />
25 mm contact skid<br />
(<strong>TESA</strong> standard<br />
probe STS)<br />
Stylus<br />
force<br />
in static<br />
measuring: < 0,5 mN<br />
(DIN 4772)<br />
Resting force on contact<br />
skids: < 0,15 mN<br />
Class 1 (± 5%)<br />
as per DIN 4772<br />
Linearity: < 2% throughout<br />
the measuring range,<br />
temperature compensation<br />
from 0 to 60 °C<br />
Probing speed:<br />
0,8 mm/s<br />
Reverse speed:<br />
approx. 2,0 mm/s<br />
Rechargeable<br />
batteries with μP<br />
controlled check<br />
Thermal printer<br />
for all measured<br />
values plus<br />
curve tp<br />
RS-232<br />
digital output<br />
80%, with no condensation<br />
10 °C to 40 °C<br />
130 x 78 x<br />
245 mm<br />
700 g<br />
✓<br />
Suited plastic case<br />
Declaration of<br />
conformity<br />
<strong>Surface</strong> Roughness Testing<br />
<strong>TESA</strong> <strong>Surface</strong> Roughness Gage<br />
<strong>RUGOSURF</strong> 100<br />
Versatile <strong>roughness</strong> gauge designed for measuring <strong>roughness</strong> parameters<br />
according to ISO 4287/1, DIN 4768, 4772, 4777 or CNOMO (ISO 12085).<br />
A wide variety of interchangeable probes allows you to solve specific<br />
applications, such as <strong>roughness</strong> measurements on surfaces of grooves, small<br />
bores, cylinders, steel balls etc.<br />
Measured parameters: Ra, Rz DIN, Rmax, R3z, Rt, Rq RMS along with<br />
printed profile bearing portion tp.<br />
Integrated thermal printer.<br />
Choice of cut-offs from 0.08 to 2.5 mm.<br />
Traversing length lt from 0.48 to 15.0 mm.<br />
RS-232 digital output compatible with PC.<br />
Possible storage of the last 50 measured values.<br />
Drive unit with or without contact skids.<br />
Easily interchangeable probes (Hall Effect Technology).<br />
Roughness Gages<br />
06930000 29527 Rugosurf 100 S, for probes with contact skids<br />
06930001 29910 Rugosurf 100 SF, for probes without contact skids<br />
06930002 29911 Rugosurf 100 S-CNOMO, for probes with contact skids<br />
06930003 29912 Rugosurf 100 SF-CNOMO, for probes without contact skids<br />
<strong>RUGOSURF</strong> 100 consists of:<br />
<strong>RUGOSURF</strong> 100<br />
CNOMO<br />
S SF S SF<br />
Control unit ● ●<br />
CNOMO control unit ● ●<br />
S type measuring unit<br />
SF type measuring unit<br />
● ●<br />
Battery charger, 90 - 230 Vac + Adapter EU/US ● ●<br />
<strong>TESA</strong> standard probe STS ● ● ● ●<br />
Connecting cable ● ● ● ●<br />
Roughness specimen, nominal value Ra = 2,95 µm ● ● ● ●<br />
Screwdriver for socket head screw ● ● ● ●<br />
Carrying and storage case ● ● ● ●<br />
User’s guide ● ● ● ●<br />
J-5
J-6<br />
Technical Data<br />
<strong>Surface</strong> Roughness Testing<br />
Measured <strong>roughness</strong> parameters Ra, Rz DIN, Rmax, R3z, Rt, Rq RMS with output of the bearing portion<br />
curve tp<br />
Measuring ranges Ra, Rq 0 ÷ 20.00 μm 0 ÷ 800 µin<br />
Rz, Rmax, R3z, Rt 0 ÷ 200.0 μm 0 ÷ 2000 µin<br />
Resolution Ra, Rq 0.01 μm 1 µin<br />
Rz, Rmax, R3z, Rt 0.1 μm 1 µin<br />
Cut-off lc (mm) 0.08 0.25 0.8 2.5<br />
Traversing length lt (mm) 0.48 1.50 4.8 15.0<br />
Total length lm (mm) 0.4 1.25 4.0 12.5<br />
Roughness Gage Assembly<br />
1 2 3 4 5 6<br />
IBM PC 486<br />
6<br />
Ra 2.72 μm<br />
lt 0.8 lc 4.8<br />
<strong>RUGOSURF</strong> 100<br />
7 8 9 10 11<br />
3<br />
4<br />
Ø3.5 28<br />
Optional Accessories for <strong>RUGOSURF</strong> 100<br />
1 Mains adapter/Battery charger<br />
2 Cover plate<br />
3 Thermal paper<br />
4 <strong>RUGOSURF</strong> 100 housing<br />
5 STS standard probe<br />
6 Supporting shoe<br />
7 Computer (optional)<br />
8 Connection cable<br />
9 Setting screw (calibration)<br />
10 S (SF) drive unit<br />
11 Control button<br />
12 Auxiliary probes (optional)<br />
Probes with contact skids (for use with either of both S or SF<br />
drive units)<br />
Ø 8<br />
1<br />
Ø 6<br />
Ø2<br />
2<br />
15 10<br />
Type AKS No. 06960002 Type BOS No. 06960003<br />
Transverse chisel probe. Measures small shafts<br />
(max. diameter: 1.0 mm), sharp edges etc.<br />
Probe for measuring small shafts (with diameter<br />
from 2.5 mm)<br />
Ø3.5<br />
Ø 8
8<br />
1<br />
25<br />
Ø3.5<br />
Probe for measuring concave or convex surfaces<br />
(radius from 3 mm, lc = 0.08 mm, lt = 0.48 mm)<br />
4.5<br />
<strong>Surface</strong> Roughness Testing<br />
Ø 8<br />
Type CCS No. 06960004 Type SLS No. 06960005<br />
27.0<br />
Ø3.5<br />
Ø 8<br />
15<br />
4<br />
27<br />
Ø3.5<br />
Probe for measuring grooves (with contact skids for<br />
depth up to 15 mm)<br />
2<br />
27<br />
10 Ø4.3<br />
ca. 1.5<br />
Standard probe Probe for checking gear tooth flanks<br />
(module from 1,5)<br />
Ø 3.5<br />
27<br />
Type STS No. 06960006 Type TFS No. 06960007<br />
Ø 7.0<br />
90<br />
18<br />
S / SF<br />
Type TRS No. 06960008<br />
Transverse probe<br />
17<br />
1<br />
8<br />
9<br />
13<br />
Tangent from 4 mm diameter<br />
Ø3.5<br />
28<br />
ca. 140<br />
Type CBS No. 06960010<br />
Ø8.0<br />
Ø 8<br />
b = 13 mm<br />
22<br />
Probe for depth measurement<br />
Ø3.5<br />
ca. 128<br />
Type BAS No. 06960009<br />
Probes without contact skids (for use with the SF drive unit)<br />
Ø 8<br />
1<br />
Ø 3.5<br />
Type AKSF No. 06960011 Type BOSF-1.5 No. 06960012<br />
Type BOSF-1.0 No. 06960013<br />
Transverse chisel probe. Measures small shafts<br />
(max. diameter: 1.0 mm), sharp edges etc.<br />
1 / 0.6<br />
26<br />
Ø 3<br />
BOSF-1.5: probe for small bores and gear tooth<br />
flanks, module from 0.75, 1.5 mm diameter<br />
BOSF-1.0: probe for small bores and gear tooth<br />
flanks, module from 0.5, 1.0 mm diameter<br />
14<br />
Ø 8<br />
Ø 8<br />
Ø 8<br />
Ø 8<br />
J-7
J-8<br />
x<br />
25<br />
SLSF-15: probe for slots. Max. depth: 15 mm<br />
SLSF-10-1.5: probe for slots. Max. depth: 10 mm,<br />
min. width: 1.5 mm<br />
SLSF-20: probe for slots. Max. depth 20 mm<br />
(on request)<br />
<strong>Surface</strong> Roughness Testing<br />
Ø8.0<br />
X = 15 mm, type SLSF-15 No. 06960014<br />
X = 10 mm, type SLSF-10-1.5 No. 06960015<br />
X = 20 mm, type SLSF-20 No. 06960016<br />
Additional accessories<br />
max. 20 mm<br />
LASF<br />
RASF<br />
26<br />
Ø 3.5<br />
LASF, angled, left-hand side model, 20 mm<br />
RASF, angled, right-hand side model, 20 mm<br />
LASF-10, angled, left-hand side model, 10 mm<br />
(No. 06960019)<br />
RASF-10, angled, right-hand side model, 10 mm<br />
(No. 06960020)<br />
7<br />
Type LASF No. 06960017<br />
Type RASF No. 06960018<br />
06960021 29935 EX100 Extension, 100 mm (for STS probe only)<br />
06960022 29936 RS-3 Roughness specimen, nominal value Ra = 3 μm, 3% (as standard)<br />
06960023 29937 RS-0.8 Reference specimen, nominal value Ra = 0.7-0.8 μm, 8%<br />
06960024 29938 RSGM Roughness specimen in glass, nominal value Ra = 0.5-2.5 μm<br />
06960025 29939 RSGH Roughness specimen in glass, nominal value Ra > 2.51 μm<br />
06960026 29976 RSGL Roughness specimen in glass, nominal value Ra < 0.49 μm<br />
06960027 29977 MESU Measuring support, complete with granite plate<br />
06960028 29978 AMU Adapter for both S and SF drive units<br />
06960029 29979 CP90 Connector, 90°<br />
06960030 29980 PR-20 Thermal paper roll, 20 items<br />
AMU<br />
MESU<br />
300<br />
ca. 75<br />
195<br />
Ø 8<br />
250 (optional 500)
✓<br />
Measuring principle<br />
of the contact<br />
system, piezoelectric<br />
3-digit LC display<br />
0.01 μm<br />
1 μin<br />
See adjoining<br />
table<br />
Class 2<br />
(± 10%)<br />
according to DIN 4772<br />
Cut-off: 0.03 in /<br />
0.8 mm<br />
(ANSI 2RC filter)<br />
The total measuring<br />
length lm may be set<br />
for 1, 3, or 5<br />
cut-off lengths<br />
Feed rate<br />
Vt: 5 mm / s<br />
15 mN<br />
RS-232<br />
9V alkaline battery,<br />
IEC 6F22<br />
≈ 3000 h<br />
Durable cast<br />
aluminum<br />
housing<br />
50°F to 113°F<br />
- 4°F to 149°F<br />
Basic instrument<br />
without probe:<br />
5.5 x 3 x 1 in<br />
Basic instr. without<br />
probe: ≈435 g<br />
Plastic case<br />
Declaration<br />
of conformity.<br />
Available upon request:<br />
reference standard<br />
No. 81.60000 with<br />
calibration certificate<br />
<strong>Surface</strong> Roughness Testing<br />
Pocket Surf ® Gage<br />
The Pocket Surf <strong>gage</strong> is a pocket-sized, economically priced, completely<br />
portable instrument for performing traceable surface <strong>roughness</strong> measurements<br />
on a wide variety of surfaces (including small inside diameters). The Pocket<br />
Surf <strong>gage</strong> is solidly built with a durable cast aluminum housing to provide<br />
years of accurate, reliable surface finish gaging. Designed for use in a shop<br />
environment or in the laboratory, the Pocket Surf works on both horizontal and<br />
vertical surfaces. It can be used at any angle and can even be held upsidedown.<br />
For even greater versatility, it operates in four probe positions – closed<br />
or with the probe at 90˚, 180˚ or 270˚. Use the Pocket Surf for flat surfaces of<br />
both, inside and outside diameters, as well as many difficult-to-<strong>gage</strong> surfaces.<br />
Capabilities<br />
The Pocket Surf can measure any one of four switch-selectable parameters.<br />
Ra Average Roughness<br />
Ry Maximum Roughness Depth<br />
Rmax Maximum Roughness Depth (DIN)<br />
Rz Mean Roughness Depth (DIN), also called Rtm<br />
Rmax and Ry are convenient “burr” and “scratch” control parameters and valuable<br />
additions to Ra and Rz. The <strong>gage</strong>’s digital display is conveniently located<br />
on the top of the unit for optimum visibility. The easy-to-read LCD readout<br />
presents the measured <strong>roughness</strong> value, in microinches or micrometers, within<br />
half a second after the surface is traversed. Out-of-range (high or low) and<br />
“battery low” signals are also displayed.<br />
Selectable Traverse Length<br />
1, 3, or 5 cutoffs of .030" (0.8 mm) each, permit checking surface lands as short<br />
as .075" (1.9 mm). The start switch is centrally located for optimum stability.<br />
4 possible measuring positions of the stylus<br />
270°<br />
180°<br />
90°<br />
closed<br />
J-9
J-10<br />
<strong>Surface</strong> Roughness Testing<br />
Pocket Surf Measurement Parameters<br />
Ra — Roughness Average<br />
The arithmetic average height of <strong>roughness</strong> irregularities measured from<br />
a mean line within the evaluation length (L).<br />
Rmax — Maximum Roughness Depth (per DIN)<br />
The largest of the 5 maximum peak-to-valley <strong>roughness</strong> depths in 5 successive<br />
sampling lengths. In the illustration below, Rmax (DIN) = Ry 4<br />
Rz — Mean Roughness Depth (per DIN),<br />
also known as Rtm<br />
The mean of 5 maximum peak-to-valley <strong>roughness</strong> depths in 5 successive<br />
sampling lengths<br />
Note: To fully meet the requirements of DIN 4768 for Rmax and Rz, probes<br />
having a stylus radius of .0002" (5 µm) are available.<br />
Ry — Maximum Roughness Depth<br />
For the evaluation length equaling one cutoff, it is the vertical distance between<br />
the highest peak and the deepest valley within the sampling length. For the<br />
evaluation length equaling 3 cutoffs, it is the largest of the 3 maximum<br />
peak-to-valley <strong>roughness</strong> depths in 3 successive sampling lengths.<br />
Traverse Length<br />
in / mm<br />
Evaluation Length<br />
in / mm<br />
Number of Cutoffs/<br />
Switch Position<br />
Ra / Ry .075 / 2.0 .030 / 0.8 1<br />
.135 / 3.5 .090 / 2.4 3<br />
Ra / Rz / Rmax .195 / 5.0 .150 / 4.0 5
<strong>Surface</strong> Roughness Testing<br />
Pocket Surf Kit Models<br />
A Pocket Surf kit is furnished complete in a<br />
plastic storage case and includes:<br />
Pocket Surf unit<br />
A general purpose probe<br />
125µ" (3.2µm) (nominal)<br />
certified specimen<br />
Standard 9 volt alkaline battery<br />
Riser plate, for calibrating the <strong>gage</strong><br />
with the certified specimen<br />
599-4000-311 26814 Pocket Surf Gage furnished with a 599-4000-90101 Certified<br />
Specimen and .0004" probe.<br />
599-4000-321 26815 Pocket Surf Gage furnished with a 599-4000-90101 Certified<br />
Specimen and .0002" probe.<br />
Optional Accessories<br />
599-4000-2421 26841 Vee Fixture<br />
599-4000-2496 26843 Height Stand<br />
599-4000-2500 26899 Swivel Fixture<br />
599-4000-2596 88239 Height Stand w/Swivel Fixture<br />
64.90000 27171 SPC Printer<br />
47.61051 26993 Cable for Printer<br />
47.68035 27005 Optional Printer Battery<br />
Specifications<br />
Overall Dimensions Approx. 5 1/2" x 3" x 1"<br />
(140 mm x 76 mm x 25 mm)<br />
Weight Approx. 14 oz. (435g)<br />
Measuring Ranges Ra - 1μ" to 250μ" (0.03μm to 6.35μm)<br />
Ry - 8μ" to 999μ" (0.2μm to 25.3μm)<br />
Rmax* - 8μ" to 999μ" (0.2μm to 25.3μm)<br />
Rz* - 8μ to 999μ" (0.2μm to 25.3μm)<br />
Display Resolution 1μ" (0.01μm)<br />
Measurement Accuracy Meets ANSI-B46.1, ISO, DIN standards<br />
and MIL specifications<br />
Digital Readout LCD; 3 digit; “Battery low” signal “H”<br />
and “L” (out-of-range measured values)<br />
Traverse Speed .2" (5.08 mm) per second<br />
Cutoff .030" (0.8 mm) ANSI 2RC filter<br />
Probe Type Piezoelectric<br />
Maximum Stylus Force 1500mfg/15.0mN<br />
Power 9 volt consumer-type alkaline battery<br />
Battery Capacity Approx. 3000 measurements,<br />
depending on frequency of<br />
use and output option<br />
Operating Temperature 50˚ to 113˚F (10˚ to 45˚C)<br />
Storage Temperature -4˚ to 149˚F (-20˚ to 65˚C)<br />
* per DIN 4768. Note that the .0002" (5μm) stylus radius must be used to<br />
measure these parameters<br />
J-11
J-12<br />
Battery Operated<br />
<strong>Surface</strong> Roughness Testing<br />
Probe Variety<br />
A variety of probes are easily interchangeable, increasing the <strong>gage</strong>’s capability<br />
for a wide range of applications, such as flats, O.D.s, I.D.s (including small<br />
bores), sharp edges, inside “O” ring grooves, short lands and shoulders.<br />
Built-in Digital Output<br />
With built-in digital output, the Pocket Surf <strong>gage</strong><br />
is designed for SPC applications and is compatible with most major SQC data<br />
collection systems. Although it provides powerful flexibility for a portable surface<br />
finish <strong>gage</strong>, the Pocket Surf <strong>gage</strong> uses a regular, consumer-type, 9 volt<br />
alkaline battery. Data can be output through an RS-232 port and printed on a<br />
Brown & Sharpe SPC printer.<br />
Portable Vee Fixture<br />
The Portable Vee Fixture simplifies the<br />
measurement of small outside diameter<br />
parts up to 1" (25mm). This optional<br />
accessory comes complete with a<br />
PS-145 setting pin.<br />
599-4000-2421 26841<br />
Swivel Fixture for Mounting on<br />
Height Gage DP.<br />
For added flexibility, the Swivel Fixture<br />
allows the Pocket Surf to be moved<br />
and locked into position at any angle.<br />
Complete with a T-Bar attachment<br />
fixture, the Swivel Fixture will work<br />
with most standard column <strong>gage</strong>s and<br />
height stands.<br />
599-4000-2500 26899<br />
Height Stand<br />
Compact and convenient, an optional<br />
height stand with bracket is available as<br />
a holding fixture for the Pocket Surf <strong>gage</strong>.<br />
This optional accessory holds the Pocket<br />
Surf both horizontally and vertically,<br />
making it easy to take measurements<br />
on a surface plate or on any suitable,<br />
flat working surface.<br />
599-4000-2496 26843<br />
Height Stand with Swivel Fixture<br />
For maximum convenience and flexibility,<br />
purchase the Height Stand together<br />
with the Swivel Fixture. This complete<br />
set will give you a fully functional holding<br />
fixture for your Pocket Surf <strong>gage</strong>, allowing<br />
you to position the tool horizontally,<br />
vertically, or at any angle in between.<br />
599-4000-2596 88239<br />
Built-in<br />
Digital<br />
Output
✓<br />
Transport<br />
packing<br />
<strong>Surface</strong> Roughness Testing<br />
Probes<br />
General Purpose Probes<br />
A 90˚ conical diamond stylus, .0004" (10μm)<br />
radius per ANSI–B46.1, ISO, and MIL specs.<br />
599-4000-1019 26834<br />
A 90˚ conical diamond stylus, .0002"<br />
(5μm) radius per DIN 4768 and certain<br />
ISO specs. This probe is identified by<br />
yellow dot at end of connector.<br />
599-4000-1026 26838<br />
Transverse Chisel Probe (Optional extra)<br />
A 90˚ sapphire chisel, .0004" (10μm)<br />
radius. Gages sharp edges or small<br />
O.D.s where probe is aligned with<br />
(in 180˚or closed position) axis of traverse.<br />
599-4000-1020-1 26835<br />
Small Bore Probe (Optional extra)<br />
A 90˚ conical diamond stylus, .0004"<br />
(10μm) radius. Gages small bores<br />
(1/8" [3.2 mm] min I.D.) up to a depth<br />
of 3/4" (19 mm).<br />
Note: Small Bore Probes can only be<br />
used in the “180˚ position” with the<br />
Pocket Surf unit supported in a height<br />
stand or other fixture.<br />
599-4000-1021 26837<br />
Parallel Chisel Probe (Optional extra)<br />
A 90˚ sapphire chisel, .0004" (10μm)<br />
radius. Gages sharp edges or small<br />
O.D.s where probe is perpendicular<br />
(in 90˚ or 270˚ position) to axis of traverse.<br />
Also for O.D.s smaller than .25" (6.35 mm)<br />
staged on 599-4000-2421 Vee Fixture.<br />
599-4000-1020-2 26836<br />
Groove Bottom Probe (Optional extra)<br />
A 90˚ conical diamond stylus, .0004"<br />
(10μm) radius. Gages grooves,<br />
recesses and holes to depths of .25"<br />
(6.35 mm). Also used for short lands<br />
and shoulders.<br />
Note: Groove Bottom Probes can only<br />
be used in the “180˚ position” with the<br />
Pocket Surf unit supported in a height<br />
stand or other fixture.<br />
599-4000-1028 26840<br />
Small Bore Probe (Optional extra)<br />
A 90˚ conical diamond stylus, .0002"<br />
(5μm) radius. Gages small bores<br />
(1/8" [3.2 mm] min I.D.) up to a depth<br />
of 3/4" (19 mm).<br />
Note: Small Bore Probes can only be<br />
used in the “180˚ position” with the<br />
Pocket Surf unit supported in a height<br />
stand or other fixture.<br />
599-4000-1027 26839<br />
J-13