EN-US | Product Range | Goeweil

PRICE PRODUCT LIST 2022/2023 RANGE 

GÖWEIL Maschinenbau GmbH

GÖWEIL Maschinenbau GmbH 

Davidschlag 11 / 4202 Kirchschlag / Austria 

Tel: +43 (0) 7215 2131-0 / Fax: +43 (0) 7215 2131-9 

office@goeweil.com / www.goeweil.com 

2022/2023 price list valid from September 1 st , 2022 

• All prices are excluding value-added tax. 

• This price list supersedes all previous price lists. 

• All specified information is without obligation. 

• We reserve the right to make changes to prices and designs. 

CONTACT PERSON FOR SALES IN THE UNITED STATES: 

Philip KIESER 

Mobile U.S: (309) 750-5639 

E-Mail: philip.kieser@goeweil.com 

Office (EU): +43 7215 21 31 - 746 

Mobile (EU): +43 664 357 1057 

2

ROUND BALER 

G-1 F125 Page 6 

BALER WRAPPER COMBINATIONS 

G-1 F125 Kombi Page 12 

G5050 Kombi Page 16 

BALER WRAPPER COMBINATIONS 

LT-Master F115 Page 21 

ROUND BALE WRAPPERS 

G1015 Page 34 

G2020 Page 36 

G3010 Page 38 

G3010 Farmer Page 40 

G3010 Profi Page 42 

SQUARE BALE WRAPPERS 

G3010 Q Page 54 

G3010 Q Farmer Page 56 

G3010 Q Profi Page 58 


VARIO-Master V140 Page 27 

G5010 Page 44 

G5012 Page 46 

G5020 Page 48 

G5020 Inliner Page 50 



PALLET WRAPPER 

G1010 Page 68 

BALE TRANSPORT DEVICES 

TDE, TDD Page 72 

BTGME Page 73 

BTGHA, DTR Page 74 

RBG Page 76 

BTGQU, GFM Page 77 

BALE OPENING DEVICES 

BTGHY Page 75 RBS Page 80 

RBA Page 81 

HIGH LIFT BUCKETS 

GHU 06 Mini Page 86 

GHU 08 Page 88 



GHS 10 Forklift Page 94 

GHS 12 Forklift Page 96 

GHK Page 98 

BLADE SHARPENER 

MS 100 Page 102 

EXHIBITION 

STANDS 

Page 103 

DRAWBAR 

TERMS AND 

EYE TYPES TIRES 

ATTACHMENTS CONDITIONS 

Page 104 Page 105 Page 106 Page 112 

3

G-1 F125 ROUND BALER 

BASIC MODEL 

Hydraulic system 

Load sensing (can also be operated in conjunction with tractors without load sensing pump) 

Pick-Up 

Camless pendulum Pick-Up, DIN rake width: 7’ 2”, rows of tines: 6, tine spacing: 2”, plastic strippers, 

twin rollers, touch wheels with pneumatic tires 

Feeding system 

6-star rotor; hydraulic drop floor; cutting unit with 30 twin blade reversible knives; 

cutting length: 1 3/8” ; hydraulic bar safety device 

Bale chamber 

18 steel rollers (4 mm) reinforced on the inside (including cleaning & starter roller); 

double-row pendulum roller bearings 

Binding unit 

Net binding, hydraulically adjustable brake roller; automatic monitoring 

Drawbar: rigid drawbar 

Chassis & tires 

Single axle; tires: 500/60-R22.5 FL630 Plus; 

brake system: dual-line air brake system 

Drive 

PTO speed: 1,000 rpm, AFC Auto Flow Control: split drive concept, 

overload safeguard with 2 cam switch couplings; chains: main drive – bale chamber: 

24 OH, secondary drive of bale chamber: 100 HSP; rotor: 80 HSP Triplex, Pick-Up: 80 HSP 

Maintenance: Fully automatic central lubricator for grease and oil 

Control: Fully automatic program control ISOBUS (without terminal) 

6

Tailgate of the G-1F125 

TECHNICAL DATA // BASIC MODEL 

ISOBUS program control 

Weight 12,300 lbs Height – single binding unit 8’ 10” 

Length 15’ 6” Height – dual binding unit 9’ 4” 

Width (500/60-R22.5) 

Width with drive axle 

Oil requirement 

8’ 5” 

8’ 10” 

Bale diameter 48” 

starting at 10 gpm at 200 bar - optimum: starting at 17 gpm at 200 bar 

2700 

(8‘ 10“) 

2850 

(9‘ 4“) 

4735 (15‘ 6“) 

G-1 with single binding unit 

4735 (15‘ 6“) 

G-1 with dual binding unit 

2550 (8‘ 5“) 

All specifications in mm 

(and feet & inch) 

REQUIRED CONNECTIONS 

• Load Sensing connection (for LS mode) or one pressure connection and one depressurized return for the supply of the 

round baler 

• Electrical power supply to the machine via ISOBUS connector or the included wiring harness 

• 7-pin socket for the entire lighting system (except work lights) 

7

G-1 F125 

ROUND BALER 

FILM & NET BINDING 

BALE CATCHER 

7,0“ TERMINAL 

4,3“ TERMINAL 

BALE CHAMBER 

Cleaning roller 

PENDULUM PICK-UP 

150 mm (6“) 

AFC AUTO FLOW CONTROL 

Drive 

bale chamber 

Starter roller 

Drive 

Rotor 

8

ADDITIONAL EQUIPMENT 

Tires 600/50-R22.5 Flotation Trac (extra charge added to standard tires) 

Width altered to 9’ 1” | With drive axle: Width altered to 9’ 6” 

Tires 710/40-R22.5 Flotation Trac (extra charge added to standard tires) 

Width altered to 9’ 9” 

Swiveling touch wheels: extra charge added to basic model “Touch wheels with pneumatic tires” 

Bale ramp 

A bale ramp can be used to deposit the bale outside of the swivel range of the tailgate. Resetting 

the machine is not necessary. 

Bale catcher – allows for easier bale dropping in slope positions 

Attention! Cannot be used in combination with the bale ramp. 

Film binding unit with camera system 

2 cameras for monitoring binding and bale deposit, including color monitor 

Dual binding unit 

The bale is wrapped simultaneously in two nets or wide films. 

This cuts the binding time for the bale in half. 

Hydraulic articulated drawbar 

Hydraulic articulated drawbar with two double-acting cylinders 

Hydraulic articulated drawbar with suspension 

Hydraulic articulated drawbar affords the operator an exceptionally smooth ride 

Drive axle, complete 

Hydraulic drive uphill, automatic braking function downhill, ABS system 

Automatic regulation, parameters can be set on the terminal 

Only in combination with tires 500/60-R22.5 and 600/50-R22.5 

Terminal ISOBUS S (4.3”) with 8 buttons and encoder 

Terminal ISOBUS L (7.0”) with 12 buttons and encoder 

ISOBUS-capable power supply for tractor 

Wiring harness is required if ISOBUS is not available on the tractor 

LED work lights 

Camera system 

2 cameras for monitoring binding and bale deposit, including color monitor 

Silage additive dosage 

Dosistar control unit, pump with filter, electronic flow meter, 

various nozzles, 26 gal tank 

Cleaning kit with air pressure 

Consisting of compressed air hose and air gun, used for cleaning the round baler. 

Only in conjunction with air brake system! 

Drawbar eye types: A, C, D, F (for an overview, see page 104) – please specify when placing 

your order! 

as given in overview 

COUNTRY-SPECIFIC EQUIPMENT 

Dual-line hydraulic brake system - with emergency brake valve and accumulator 

Extra charge added to basic model 

Rotating light (height – single binding unit: 9’ 5” // height – dual binding unit: 9’ 7” mm) 

Freight costs net 

Training net 

9

G-1 F125 

SILAGE ADDITIVE DOSING UNIT 

BENEFITS / FEATURES: 

ROUND BALER 

• Dosing device for lactic acid bacteria 

• Suitable for minimally corrosive acids 

• Self-priming pump with filter, flow meter & 

electrical speed controller 

• Two spray nozzles 

• The dosing unit is switched on or off via the Pick-Up 

and / or the infeed roller 

• Inspection glass for quantity control 

• Display for quantity indication l/h, day quantity counter 

• Dosing adjustment via electric speed controller 

• Can be calibrated for acids of different viscosity 

• Technical data: 

Dosing capacity: 5 - 40 gal/hr 

Drive: 12 volt (DC) 

Tank size: 26 gal, with complete emptying 

DRIVE AXLE 


• Maximum safety and maximum comfort in every position 

– uphill and downhill 

• The sensor system integrated in the drawbar 

controls the operating states of the drives 

– Neutral – brake is completely autonomous. 

• The driver can concentrate fully on the work 

• A clearly organized display continuously informs the 

driver of all relevant parameters 

• The system enables maximum traction with 100 % 

soil protection 

Display 

Tractor 

12 V power supply 

Control signals V/N/R/B 

Electronic 

control 

LS TL 

P 

SYSTEM REQUIREMENTS IMPOSED ON THE TOWING VEHICLE: 

• Pressurized oil supply starting from Power-Beyond (LS) 

• Oil delivery capacity for G-1 F125 Kombi: optimum starting at 27 gpm 

• Oil delivery capacity G-1 F125: optimum starting at 17 gpm 

• Operating pressure: 200 bar 

• 12-volt signal from the reverse gear 

• 12-volt signal from the brake light 

• 12-volt power supply 

• Yoke / ball-type hitch (K80) 

10

G-1 F125 KOMBI BALER-WRAPPER COMBINATION 

BASIC MODEL 

Hydraulic system 

Load sensing (can also be operated in conjunction with tractors without load sensing pump) 

Pick-Up 

Camless pendulum Pick-Up, DIN rake width: 7’ 2”, rows of tines: 6, tine spacing: 

2 ”, plastic strippers, twin rollers, touch wheels with pneumatic tires 

Feeding system 

6-star rotor; hydraulic drop floor; cutting unit with 30 twin blade reversible knives; 

cutting length: 1 3/8 “ ; hydraulic bar safety device 

Bale chamber 

18 steel rollers (4 mm) reinforced on the inside (including cleaning & starter roller); 

double-row pendulum roller bearings 

Binding unit with camera system 

Film and net binding, hydraulically adjustable brake roller, automatic monitoring 

2 cameras for monitoring film binding and bale deposit, including color monitor 

Drawbar: rigid drawbar 

Chassis & tires 

Tandem axle chassis; tires: 560/45-R22.5 Flotation Trac; 

brake system: dual-line air brake system 

Drive 

PTO speed: 1,000 rpm, AFC Auto Flow Control: split drive concept, 

overload safeguard with 2 cam switch couplings; 

chains: main drive – bale chamber: 24 OH, secondary drive of bale chamber: 100 HSP 

Rotor: 80 HSP Triplex, Pick-Up: 80 HSP 

Maintenance: Fully automatic central lubricator for grease and oil 

Control: Fully automatic program control ISOBUS (without terminal) 

Wrapping machine 

Twin wrapping arm; hydraulically actuated wrapping table; bale deposit backwards; 

4 bale conveyor belts including belt guide; 4 bale guide rollers; film pre-stretcher for 30 “ 

film cutter; film monitoring unit; single-film mode; hydraulically lowering, closed film storage for 14 

rolls of film and 2 rolls of wide film 

or netting; LED work lights; additional roller for wrapping table 

12

Bale deposit 

ISOBUS program control 


Weight 19,800 lbs Height – single binding unit 9’ 3” 

Length 24’ 4” Height – dual binding unit 9’ 3” 

Width (560/45-R22.5) 9’ 10” Bale diameter 48” 


starting at 21 gpm at 200 bar - optimum: starting at 27 gpm at 200 bar 

2820 

(9‘ 3“) 

2820 

(9‘ 3“) 

7420 (24‘ 4“) 7420 (24‘ 4“) 

G-1F125 Kombi with single binding unit 

G-1F125 Kombi with dual binding unit 

3000 (9‘ 10“) 

All specifications in mm 

(and feet & inch) 


• Load Sensing connection (for LS mode) or one pressure connection and one depressurized return for the supply of the 

round baler 

• Electrical power supply to the machine via ISOBUS connector or the included wiring harness 

• 7-pin socket for the entire lighting system (except work lights) 

13

G-1 F125 KOMBI 

SILAGE ADDITIVE DOSING UNIT 

BALER-WRAPPER COMBINATION 


• Dosing device for lactic acid bacteria 

• Suitable for minimally corrosive acids 

• Self-priming pump with filter, flow meter & 

electrical speed controller 

• Two spray nozzles 

• The dosing unit is switched on or off via the Pick-Up 

and / or the infeed roller 

• Inspection glass for quantity control 

• Display for quantity indication l/h, day quantity counter 

• Dosing adjustment via electric speed controller 

• Can be calibrated for acids of different viscosity 

• Technical data: 

Dosing capacity: 5 - 40 gal/hr 

Drive: 12 volt (DC) 

Tank size: 26 gal, with complete emptying 

DRIVE AXLE 


• Maximum safety and maximum comfort in every position 

– uphill and downhill 

• The sensor system integrated in the drawbar 

controls the operating states of the drives 

– Neutral – brake is completely autonomous. 

• The driver can concentrate fully on the work 

• A clearly organized display continuously informs the 

driver of all relevant parameters 

• The system enables maximum traction with 100 % 

soil protection 

Display 

Tractor 

12 V power supply 

Control signals V/N/R/B 

Electronic 

control 

LS TL 

P 

SYSTEM REQUIREMENTS IMPOSED ON THE TOWING VEHICLE: 

• Pressurized oil supply starting from Power-Beyond (LS) 

• Oil delivery capacity for G-1 F125 Kombi: optimal starting at 27 gpm 

• Oil delivery capacity G-1 F125: optimal starting at 17 gpm 

• Operating pressure: 200 bar 

• 12-volt signal from the reverse gear 

• 12-volt signal from the brake light 

• 12-volt power supply 

• Yoke / ball-type hitch (K80) 

14


Tires 650/40-R22.5 Vredestein Flotation Trac (extra charge added to standard tires) 


Tires 710/35-R22.5 Nokian Country King (extra charge added to standard tires) 


Swiveling touch wheels (extra charge added to basic model “Touch wheels with pneumatic tires”) 

Dual binding unit 

The bale is wrapped simultaneously in two nets or wide films. 

This cuts the binding time for the bale in half. 





Drive axle, complete 

Hydraulic drive uphill, automatic braking function downhill, ABS system 

Automatic regulation, parameters can be set on the terminal 

Film pre-stretcher combined 

For film widths between 20” and 30” ; the overlap can be adjusted as well 

Additional bale turn 

When the wrapping process is complete, the bale will keep turning to allow the film 

to make better contact 

Bale drop mat 

For a gentle bale drop onto the field 

Bale tipper 

When the wrapping process is complete, the bale is positioned on its right front side 

with the direction of travel 


Dosistar control unit, pump with filter, electronic flow meter, 

various nozzles, 26 gal tank 

Cleaning kit with air pressure 

Consisting of compressed air hose and air gun, used for cleaning the round baler – 

only in combination with air brake system! 

Terminal ISOBUS S (4.3") with 8 buttons and encoder 

Terminal ISOBUS L (7.0") with 12 buttons and encoder 



Drawbar eye types: A, C, D, F (for an overview, see page 104) – please specify when placing 

your order! 




Extra charge added to basic model 

Rotating light (height – single & dual binding unit: 9’ 11”) 


Training net 

15

G5050 KOMBI 



Weight 11,900 - 17,000 lbs Bale diameter 36” - 60” 

Total length 25’ 9” When bales are loaded through without wrapping process (hay, straw) up to 78” 

Total width 9’10” Oil requirement starting at 16 gpm at 190 bar 

Total height 9’ 3” - 11’ Bale weight up to 4,000 lbs 

BASIC MODEL (without round baler) 

Load sensing 

Can also be operated in conjunction with tractors without load sensing pump 

Twin wrapping arm 

Hydraulically actuated wrapping table 

Additional roller for wrapping table 

4 bale conveyor belts including belt guide and 4 bale guide rollers 

Bale deposit backwards 

Film pre-stretcher 30” 

Film cutter 

Film monitoring unit 

Single-film mode 

Hydraulically lowerable film storage for up to 10 rolls of film 

Height-adjustable drawbar for high and low hitch 

Tandem axle chassis with tires 560/45-R22.5 Flotation Trac 

Dual-line air brake system 

Attachment parts for round baler AGCO (Fendt & MF) 130F, 160V, 180V 

Paint option of blue or baler color 


Fully automatic program control ISOBUS (without terminal) 

16


Tires 650/40-R22.5 Vredestein Flotation Trac (extra charge added to standard tires) 


Tires 710/35-R22.5 Nokian Country King (extra charge added to standard tires) 



For film widths between 20” and 30”; the overlap can be adjusted as well 





Additional bale turn 



Bale drop mat: for a gentle bale drop onto the field 

Bale tipper 

When the wrapping process is complete, the bale is positioned on its right front side with 

the direction of travel 

Drawbar – long version: 8” longer than standard drawbar 

PTO shaft may have to be extended 

Camera system – Required connection: 12 volt hybrid connector DIN ISO 4165 

Terminal ISOBUS S (4.3”) with 8 buttons and encoder 

Terminal ISOBUS L (7.0”) with 12 buttons and encoder 



Drawbar eye types: A, B, C, D, F (for an overview, see page 104) – please specify when 

placing your order! 




(extra charge added to basic model) 

Hydraulic brake system 

(alternative to dual-line air brake system) 

Rotating light (height plus 8”) 


Training net 


1 pressure connection and 1 depressurized return for the supply of the wrapper 

Load Sensing connection (required for LS mode only) 

Electrical power supply to the machine via ISOBUS connector or the included wiring harness 

7-pin socket for the entire lighting system (except work lights) 

17

LT-MASTER F115 

NEW 

Baler-Wrapper combination 

21



BASIC MODEL 


Hydraulically driven bale chamber for bale diameters of 48” 

Dual binding unit for net and film 

On-board hydraulic system with oil cooler 

Refeed to prevent possible crumbling losses 

Integrated Multicrop feeder (working width 11’ 6”) 



Bale drop towards the front via hydraulic bale delivery ramp 

Height-adjustable drawbar 

Film pre-stretcher 20” and 30” combined with overlap adjustment 

Film cutter 



Tandem axle chassis with suspension and tires 385/55 R22.5 




Variable bale size (only for film binding) 

infinitely variable bale size from 24” - 48” 

Camera system 

The four cameras are positioned such that they afford you a clear view of the top of 

the bale chamber, the sloping conveyor, the wrapping table and the rear of the machine (on the 

right in direction of travel) at all times. 

Water injection for bale chamber 

Consists of solenoid valve, tubing, and adjustable nozzles. For mixing water into dry materials 

Radio hand-held transmitter for bale deposit 

Automatic central lubrication system for oil and grease 

Fully automatic program control PROFI 

The execution of all work cycles is fully automatic


Weight 

32,600 lbs 

Length 38’ 

Width 8’ 4” 

Height 13’ 2” 

Bale diameter from 24” - 48” 

POWER REQUIREMENT OF THE TOWING VEHICLE 

Oil requirement pivoting drawbar 2.5 gal at 200 bar 

Power requirement 

at least 120 hp 

TRANSPORT POSITION 

WORK POSITION 

490 - 1200 

(1‘ 6“ - 3‘ 9“) 

(10‘ 8“) 3251 1093 1472 

6450 (21‘ 2“) (3‘ 7“) (5‘) 

(12‘ 2“) 

3700 

30° 

3500 

(11‘ 6“) 

11850 

(39‘) 

30° 

14170 

(46‘ 6“) 

(13‘ 2“) 

4000 

(13‘) 

3940 

2550 6130 

(8‘ 4“) 

(20‘ 1“) 


1 double-acting and 1 single-acting control device for the pivoting drawbar 


The electrical power supply for the machine is provided through the ISOBUS socket or the supplied wiring harness 

23




Electric drive 

Consists of a 120 hp electric motor with soft starter. Complete with switch cabinet, wiring, 

base with forklift slings, emergency switch and main switch 

Required connection for electric motor: 400 V / 50 Hz, CEE 125 A, protection class IP55 

Weighing system, non-calibrated 

Consists of weighing table, display and label printer with GÖWEIL logo or customer logo 

Price only valid when purchased together with LT-Master 

Weighing system, calibrated 


Bale delivery ramp with bale tipper 

The bale can be set down gently on the face side (left or right), or forward 


Dosistar control unit, pump with filter, electronic flow meter, various nozzles, 

suction hose for external container. 

Attention! Tank not included 

Silage additive tank 

120 gal stainless steel tank mounted on the machine 

Voltage converter ABS 

12V to 24V 

24V Lighting 

Consists of 15-pin to 13-pin and 2x 7-pin to 13-pin Spiral Cables 

Drawbar eye types: A, B, C, D, E, G (for an overview, see page 104) 

Please specify when ordering! 




Rotating light 


Training net 

ATTENTION! 

All prices referring to baler-wrapper combination LT-Master are quoted as net prices!


Terminal PROFI plus L 


Silage additive dosage and Silage additive tank 

15 

13 

Spiral Cable - Semi-truck 24V 15-pin to 13-pin 12V 

7 

13 

Spiral Cable - Semi-truck 24V 2x 7-pin to 13-pin 12V 

7 

25

VARIO-MASTER V140 

Baler-Wrapper combination with variable bale chamber 

for bale diameters between 32“ - 55“ in 2“ steps 

27



BASIC MODEL - WITH EU type-approval for up to 80 km/h 


Hydraulically driven variable bale chamber for bale diameters between 32” - 55” 

Dual binding unit for net and film 

On-board hydraulic system with oil cooler 

Two belts for a high compression of the material 

Refeed to prevent possible crumbling losses 

Integrated Multicrop feeder (working width 11’ 6”) 



Bale drop towards the front via hydraulic bale delivery ramp 

Height-adjustable drawbar 

Film pre-stretcher 20” and 30” combined with overlap adjustment 

Film cutter 



Tandem axle chassis with suspension and tires 385/55 R22.5 




Camera system 

The four cameras are positioned such that they afford you a clear view of the top of 

the bale chamber, the sloping conveyor, the wrapping table and the rear of the machine (on the 

right in direction of travel) at all times. 

Water injection for bale chamber 

Consists of solenoid valve, tubing, and adjustable nozzles. For mixing water into dry materials 

Radio hand-held transmitter for bale deposit 

Automatic central lubrication system for oil and grease 


The execution of all work cycles is fully automatic 

28


Weight 

34,830 lbs 

Length 38’ 8” 



Bale diameter from 32” - 55” 

POWER REQUIREMENT OF THE TOWING VEHICLE 

Oil requirement pivoting drawbar 2.5 gal at 200 bar 

Power requirement 

at least 120 hp 

TRANSPORT POSITION 

WORK POSITION 

(12‘ 2“) 

3700 

490 - 1200 

6450 

(10‘ 32518“) 

1093 1472 

(21‘ 2“) (3‘ 7“)(4‘ 10“) 

30° 

3500 

11780 (38‘ 8“) 

30° 

(46‘ 6“) 

14170 

4000 

4375 

(13‘ 2“) 

(11‘ 7 “) 

(1‘ 7“ - 4“) 

2550 6130 

(8‘ 4“) 

(20‘ 1“) 


1 double-acting and 1 single-acting control device for the pivoting drawbar 


The electrical power supply for the machine is provided through the ISOBUS socket or the supplied wiring harness 

29





Consists of a 120 hp electric motor with soft starter. Complete with switch cabinet, wiring, 

base with forklift slings, emergency switch and main switch 


Weighing system, non-calibrated 


Price only valid when purchased together with LT-Master 

Weighing system, calibrated 



The bale can be set down gently on the face side (left or right), or forward 


Dosistar control unit, pump with filter, electronic flow meter, various nozzles, 

suction hose for external container. 

Attention! Tank not included 

Silage additive tank 

120 gal stainless steel tank mounted on the machine 

Voltage converter ABS 

12V to 24V 

24V Lighting 

Consists of 15-pin to 13-pin and 2x 7-pin to 13-pin Spiral Cables 

Drawbar eye types: A, B, C, D, E, G (for an overview, see page 104) 

Please specify when ordering! 



Dual-line hydraulic brake system - with emergency brake valve and accumulator - 

WITHOUT EU type-approval 



Training net 

ATTENTION! 

All prices referring to baler-wrapper combination VARIO-Master are quoted as net prices! 

30


Terminal PROFI plus L 


Silage additive dosage and Silage additive tank 

15 

13 

Spiral Cable - Semi-truck 24V 15-pin to 13-pin 12V 

7 

13 

Spiral Cable - Semi-truck 24V 2x 7-pin to 13-pin 12V 

7 

31

G1015 

ROUND BALE WRAPPER 


Weight 

2,170 lbs 


Width 5’ 11” 


Roller opening width 5’ 9” 

Bale diameter 36” - 63” 


starting at 5 gpm at max. 190 bar 

Bale weight 

up to 2,600 lbs 

Program control STANDARD 

1750 mm 

BASIC MODEL 

Load sensing 

Can also be operated in conjunction with tractors without load sensing pump 

Single wrapping arm 

Cat. II and Cat. III three-point linkage 

Hydraulically swiveling roller arms for picking up and depositing the bales 

2 bale guide rollers 


Film cutter 

Storage for 1 roll of film 


Program control STANDARD with radio remote control 

Bale pick-up and deposit are controlled using the electronic joystick. The cycles “wrapping 

process” and “film cutting” start automatically. 

34





Stops the wrapping process if film tears or runs out 

Connections for hydraulic upper linkage 

The hydraulic upper linkage is controlled directly using the program control 

of the wrapper 

Support roller 

Length changes to: 7’ 9” / height changes to: 8’ 3” 

Bale tipper 

Operation via program control 

Counterweight 

Approx. 130 lbs 

Battery supply cable 17 ft 2 x 6 mm² with 3-pin power socket 

LED Light and indicator system 

PTO drive shaft (without hydraulic oil) 

Including gearbox with hydraulic pump, slip-on tractor PTO drive shaft, return filter 

and 8 gal hydraulic oil tank 

Possible attachments (without installation): 

Euro-attachment 

Merlo, Merlo ZM3, SMS, MX 

Dieci/New Holland, Dieci Dedalus, Manitou, JCB Q-Fit, JCB Compact Tool Carrier, Weidemann 

hydraulic, Kramer, Schäffer up to 3550, Schäffer from 3550T, Atlas, Claas Scorpion, 

Zettelmeyer 402, Zettelmeyer 602, CAT 907H / Liebherr L507, Faresin, Faucheux, Bobcat, 

CAT TH 407 C, Giant, Skid Steer, Fendt Cargo T955/Sennebogen 

Other attachments - 

Overview of attachments with dimensions - see page 106 



Training net 


1 pressure connection and one depressurized return for the supply of the wrapper 

Load Sensing connection (required for LS mode only) 

3-pin socket for electrical supply with direct supply to the battery (12V/30A) - wire cross section 2x6 mm² 

35

G2020 



BASIC MODEL 


Hydraulically tilting wrapping table 


Bale pick-up and bale deposit backwards 


Film cutter 

Storage for 4 rolls of film 

Trailer drawbar (height-adjustable) 

Tires 380/55-17AW 




Bale pick-up and deposit are controlled using the electronic joystick. The cycles “wrapping 

process” and “film cutting” start automatically. 


Weight 2,500 lbs *Bale diameter 36” – 60” with standard wrapping arm 

Length 12’ 9” *Bale diameter 36” – 53” (height altered to 2,760 mm) 

Width 8’ Oil requirement starting at 5 gpm at max. 190 bar 

Height 9’ 11” Bale weight up to 3000 lbs 

*Please specify when ordering! 

36






Additional bale guide roller (each) – maximum 2 items 


Including gearbox with pump, return filter and 8 gal hydraulic oil tank 

Wide-angle cardan shaft (one-sided) 


Drawbar eye option: B (overview on page 97) 




Training net 


1 pressure connection and one depressurized return for the supply of the wrapper (not applicable for PTO drive shaft) 



37

G3010 



Weight 1,900 lbs Bale diameter 36” - 63” 

Length 8’ 11” Oil requirement starting at 5 gpm at max. 190 bar 

Width 5’ 8” Bale weight up to 4,000 lbs 


BASIC MODEL 




Bale deposit to the left and the right 


Film cutter 

Three-point linkage Cat. II 



The cycles “wrapping process” and “film cutting” start automatically, 

while “bale drop” starts at the push of a button 


1 pressure connection and 1 depressurized return for the supply of the wrapper (not applicable for PTO drive shaft) 


38


Fully automatic PROFI program control 

The execution of all work cycles is fully automatic. 

Extra charge for Standard control 

Radio remote control 

Only in combination with fully automatic program control PROFI 

Required connection: 3-pin socket for electrical supply of the hand-held terminal (12V/10A) 

Bale pick-up 

Bale pick-up on the right with or against the direction of travel 

Bale deposit on the left (on the right, only possible in bale pick up) 

Width altered to 6’ 

Bale weight: up to 2,400 lbs 


For film widths between 20” and 30”; the overlap can be adjusted as well. 


Stops the wrapping process if film tears or runs out. 


LED Light and indicator system – Required connection: 7-pin socket for the entire lighting 

system (except work lights) 

Electric drive (without hydraulic oil) – tractor operation still possible 

5 hp electric motor, return filter and 8 gal hydraulic oil tank, fully assembled 



Including gearbox with hydraulic pump, slip-on tractor PTO drive shaft, return filter and 

8 gal hydraulic oil tank 

1-cylinder Honda gasoline engine (without hydraulic oil) – tractor operation still possible 

11 hp gasoline engine with battery, electric starter, return filter and 8 gal hydraulic oil tank 




Training net 

39

G3010 FARMER 



BASIC MODEL (without hydraulic oil) 




Bale deposit on the left and the right 


Film cutter 

Hydraulically adjustable lift axle 

Removable, hydraulic articulated drawbar 


Tires 300/80-15.3 AW 

1-cylinder Honda gasoline engine (without hydraulic oil) 





The cycles “wrapping process” and “film cutting” start automatically, while “bale drop” starts at the push 

of a button 

40 



Length 17’ 3” Oil requirement Self-sufficient oil supply 


Height 

9’ 10” with the lift axle extended


Tires 380/55-17 AW 







2.5 gal spare fuel can including bracket 

Lower linkage link 

Drawbar eye types: A, B, D, H (for an overview, see page 104) – Please specify when placing 

your order! 





Hydraulic brake without accumulator and breakaway quick-closing device 



Training net 



41

G3010 PROFI 


Program control PROFI 



Length 18’ 5” Oil requirement Self-sufficient oil supply 


Height 

10’ with the lift axle extended 





Bale deposit on the left and the right 


Film cutter 




Tires 380/55-17 AW 

3-cylinder diesel engine Kubota (without hydraulic oil): 23 hp diesel engine, water cooled, battery, 

electric starter, hours counter, return filter and 12 gal hydraulic oil tank 



Fully automatic program control PROFI with radio remote control 


42


Tires 520/50-R17 FLT 

Width altered to 8’ 5”, height altered to 10’ 2” (with lift axle extended) 






Diesel engine speed control 

Automatically switches to idle speed after the wrapping process or extended intervals 

Axle suspension 




your order! 








Training net 



3-pin socket for electrical supply of the hand-held terminal (12V / 10A) 

43

G5010 



BASIC MODEL 




Bale pick-up from the front, bale deposit backwards 


Film cutter 


Hydraulically controlled pivoting drawbar with manual control and lower linkage link 

Tires 380/55-17 AW 




“Bale pick-up” is controlled manually using the electronic joystick. The cycles “wrapping 

process” and “film cutting” start automatically, while “bale drop” starts at the 

push of a button. 



Length 12’ 9” *Bale diameter 36” – 53” height altered to 9’ 2” 


Height 10’ Bale weight up to 4,000 lbs 


44


Tires 480/45-17 AW 







Including gearbox with pump, return filter, hydraulic oil tank 

and lower linkage link 

Cardan shaft 


Prevents the bale from dropping off the wrapping table in steep terrain 

Bale drop mat (including additional roller) 


Bale tipper (including additional roller) 




Drawbar eye type: H (for an overview, see page 104) – Please specify when placing your 

order! 







Hydraulically controlled, telescoping pivoting drawbar with lower linkage link 

Length altered to 15’ 6” 

NOT available in combination with PTO drive shaft 


Training net 



1 double-acting control device for controlling the pivoting drawbar 



45

G5012 



BASIC MODEL 






Film cutter 


Hydraulically controlled pivoting drawbar with manual control and lower linkage link 

Tires 380/55-17 AW 




“Bale pick-up” is controlled manually using the electronic joystick. The cycles “wrapping 

process” and “film cutting” start automatically, while “bale drop” starts at the push of a button. 







46


Tires 480/45-17 AW 







Including gearbox with pump, return filter, hydraulic oil tank 

and lower linkage link 

Cardan shaft 



Bale drop mat (including additional roller) 







order! 











Training net 



1 double-acting control device for controlling the pivoting drawbar 



47

G5020 



BASIC MODEL 






Film cutter 


Hydraulically controlled pivoting drawbar with lower linkage link 

Tires 380/55-17 AW 





48 




Width 9’ Oil requirement 

starting at 7 gpm with standard hydraulics at max. 190 bar 

starting at 17 gpm with LS hydraulics at max. 190 bar 






7-pin socket for the entire lighting system (except work lights)


Tires 480/45-17 AW – width altered to 9’ 5” 


Required connection: 3-pin socket for electrical supply of the hand-held terminal (12 V / 10 A) 

Load sensing: Oil pressure and oil quantity are adjusted to consumption. This boosts 

energy efficiency and speed. The machine can also be operated in conjunction with tractors 

without load sensing pump. Load sensing connection required 



Film monitoring unit with single-film mode: 


Automatically switches to “single-film mode” as soon as one roll 

runs out. During this process the feed rate is reduced to ensure an overlap of 50 %. 


Including gearbox with pump, return filter, hydraulic oil tank and lower linkage link 

PTO drive shaft Load Sensing (without hydraulic oil) 

Including gearbox with pump, return filter, hydraulic oil tank and lower linkage link 

Cardan shaft 

Extra bale rotation 





Bale drop mat (including additional roller): For a gentle bale drop onto the field 

Bale tipper (including additional roller): When the wrapping process is complete, the bale is 

positioned on its right front side with the direction of travel 



order! 











Training net 

49

G5020 INLINER 






Width 9’ Oil requirement 

starting at 7 gpm with standard hydraulics at max. 190 bar 

starting at 17 gpm with LS hydraulics at max. 190 bar 


BASIC MODEL 






Film cutter 

Film monitoring unit with single-film mode 



Tires 380/55-17 AW 









50 

*Please specify when ordering!


Tires 480/45-17 AW – width altered to 9’ 5” 



Load sensing: Oil pressure and oil quantity are adjusted to consumption. This boosts 

energy efficiency and speed. The machine can also be operated in conjunction with tractors 

without load sensing pump. Load sensing connection required 



Extra bale rotation 





Bale drop mat (including additional roller): For a gentle bale drop onto the field 




Camera system – Required connection: 12 volt hybrid connector DIN ISO 4165 



order! 








Training net 

51

G3010 Q 

SQUARE BALE WRAPPER 


BASIC MODEL 


Hydraulically tilting wrapping table with mechanical belt length adjustment 

Wide, continuous bale conveyor belt with belt guide and 2 bale guide rollers 


Combined film pre-stretcher 20” and 30” 

Film cutter 

Feed rate shut-off valve 

This ensures that the film will overlap accurately for rectangular bales 







1 pressure connection and one depressurized return for the supply of the wrapper (not applicable for PTO drive shaft) 


54


Weight 2,490 lbs For all bale dimensions up to 48” x 56” 

Length 8’ 11” Bale length up to 63” 

Width 5’ 8” Round bale diameter 36” – 60” 

Height 9’ Oil requirement starting at 5 gpm at max. 190 bar 

Bale weight round / square 

max. 4,000 / 2,200 lbs 




Extra charge for Standard control 


Only in combination with fully automatic program control PROFI 


Bale pick-up for square and round bales 

Bale pick-up on the right against the direction of travel 

Bale deposit on the left 

Width altered to 1,820 mm 



Additional bale guide roller 

LED Light and indicator system – Required connection: 7-pin socket for the entire lighting 

system (except work lights) 

Electric drive (without hydraulic oil) – tractor operation still possible 

5 hp electric motor, return filter and 8 gal hydraulic oil tank, fully assembled 



Including gearbox with hydraulic pump, slip-on tractor PTO drive shaft, return filter and 30 l 

hydraulic oil tank 

1-cylinder Honda gasoline engine (without hydraulic oil) – tractor operation still possible 





Training net 

55

G3010 Q FARMER 









Film cutter 




Tires 300/80-15.3 AW 

1-cylinder Honda gasoline engine (without hydraulic oil) 









56




Width 6’ 5” Round bale diameter 36” – 60” 

Height 10’ 4” with the lift axle extended Oil requirement self-sufficient oil supply 


max. 4,000 / 2,200 lbs 


Tires 380/55-17 AW 





2.5 gal spare fuel can including bracket 



your order! 








Training net 



57

G3010 Q PROFI 









Film cutter 




Tires 380/55-17 AW 


electric starter, hours counter, return filter and 12 gal hydraulic oil tank 







58




Width 8’ Round bale diameter 36” – 60” 

Height 10’ 6” with the lift axle extended Oil requirement self-sufficient oil supply 


max. 4,000 / 2,200 lbs 



Width altered to 8’ 4”, 

Height altered to 10’8” (with the lift axle extended) 










your order! 








Training net 



3-pin socket for electrical supply of the hand-held terminal (12 V / 10 A) 

59

G3020 Q PROFI 






Height 10’ 6” with the lift axle extended Oil requirement starting at 5 gpm at max. 190 bar 

BASIC MODEL 





Bale pick-up on the right hand side with the direction of travel 

Bale deposit to the left 


Film cutter 


Rigid drawbar for lower linkage link 


Tires 380/55-17 AW 







60 



max. 4,000 / 2,200 lbs



Width altered to 8’ 4”, 

Height altered to 10’ 8” (with the lift axle extended) 






3-cylinder diesel engine Kubota (without hydraulic oil): 23 hp diesel engine, water cooled, 

battery, electric starter, hours counter, return filter and 12 gal hydraulic oil tank 


Switches automatically to idle speed after the wrapping process or extended intervals – 

Only in combination with 3-cylinder diesel engine Kubota 






your order! 








Training net 





61

G4010 Q PROFI 




Load-sensing 




Bale deposit to the left with the direction of travel 


Film cutter 



Hydraulic support foot 

Height-adjustable drawbar with hydraulic support foot for wheel loader operation, 

can be controlled via radio remote control 


Tires 380/55-17 AW 


electric starter, hours counter, pressure & return filter and 12 gal hydraulic oil tank 




2 LED work lights 



62


Weight 7,000 lbs For all bale dimensions from 32” x 32” to 48” x 56” 

Length 22’ 3” Single/double bales with a length of up to 78” 


Height 11’ 6” to 12’ 2” depending on position of upper part Oil requirement self-sufficient oil supply 

with the lift axle extended Bale weight round / square max. 4,000 / 3,300 lbs 



Width altered to 8’ 4”, height altered to 12” – 12’ 4” depending on position 

of upper part, with lift axle extended 







Bale drop mat 

Hydraulically lowerable rubber mat that can be controlled via radio remote control 



Drawbar eye types: A, B, C, D, G, H (for an overview, see page 104) – Please specify 

when placing your order! 






25 mph design in accordance with road traffic regulations 

Special permit only in conjunction with dual-line air brake system 



Training net 



3-pin socket for electrical supply of the hand-held terminal (12 V / 10 A) 

63

G4020 Q PROFI 



Weight 8,100 lbs For all bale dimensions from 32” x 32” to 48” x 56” 

Length 21’ Single / double bales with a length of up to 78” 

Width 8’ Round bale diameter 36” - 63” 

Height 12’ 2” with the lift axle extended Oil requirement starting at 21 gpm at max. 190 bar 


Load-sensing: can also be operated in conjunction with tractors without load sensing pump 





Bale pick-up on the right hand side with the direction of travel 

Bale deposit to the left 


Film cutter 


Lower linkage link drawbar 

Storage for up to 16 rolls of film 

Tires 380/55-17 AW 

Feed rate shut-off valve – This ensures that the film will overlap accurately for rectangular bales 


2 LED work lights 



64 



max. 4,000 / 3,300 lbs



Width altered to 8’ 4”, height altered to 12’ 4” 



Hydraulic support foot 

Height-adjustable drawbar with hydraulic support foot for wheel loader operation. 

Can be controlled via radio remote control – no PTO drive shaft possible 

Only in conjunction with 3-cylinder diesel engine Kubota 






Including gearbox with pump, return filter and 60 l hydraulic oil tank 

Not combinable with 3-cylinder diesel engine Kubota 

Cardan shaft 

3-cylinder diesel engine Kubota (without hydraulic oil): 23 hp diesel engine, water cooled, 

battery, electric starter, hours counter, return filter and 12 gal hydraulic oil tank. 


Switches automatically to idle speed after the wrapping process or extended intervals – 

Only in combination with 3-cylinder diesel engine Kubota 



Drawbar eye types: A, B, C, D, G, H (for an overview, see page 104) – Please specify when 

placing your order! Only in conjunction with additional equipment “hydraulic support foot” 






25 mph design in accordance with road traffic regulations 

Special permit only in conjunction with dual-line air brake system 



Training net 



Load sensing connection (for LS operation) – (not applicable for PTO drive shaft) 



65

G1010 

PALLET WRAPPER 



Weight 1,670 lbs Maximum pallet size 53” x 53” 

Length 6’ 6” Maximum pallet height 67” 

Width 4’ 7” Oil requirement starting at 6 gpm at max. 190 bar 

Height 7’ 4” Pallet weight up to 4,400 lbs 

BASIC MODEL (without attachment) 

Load sensing 

can also be operated in conjunction with tractors without load sensing pump 


Hydraulically folding film cutter 



Hydraulically actuated film pre-stretcher 

Height adjustment: 2’ 

Standardized fork tine mount: ISO 3B 

Fork tines - Length: 55” 



All work steps can be performed manually and in fully automatic fashion 

68






Fork tines - Length: 86” 

Extra charge added to fork tines 55” (basic model) 

Telescopic forks: 51” long with 35” extension 

Extra charge added to fork tines 55” (basic model) 


Camera system 

For a better overview in the area of the fork tines and film cutter 

Required connection: 12 volt hybrid connector DIN ISO 4165 

Splash guard 

Especially for operation with wheel loader or telescopic loader 



SMS, MX 

Dieci/New Holland, Amkodor, Manitou, JCB Q-Fit, JCB Compact Tool Carrier, Weidemann 

hydraulic, Kramer, Schäffer up to 3550, Schäffer 3550T or higher, Atlas, Claas Scorpion, 

Zettelmeyer 602, Volvo BM, CAT 907H / Liebherr L507, Liebherr L514, Faresin, Faucheux, Bobcat, 

Skid Steer, Fendt Cargo T955/Sennebogen 

Cat. II and Cat. III three-point linkage 





Training net 



Load Sensing connection (for LS mode) 


69


TDE – Bale Transport Spike Single 

For transporting unwrapped round bales. 

Base frame with Cat. I and II three-point linkage 


Reinforced tines | Ø: 1.5”, length: length 43” 

Tine protection for road transport 

Weight: 165 lbs 

Bale weight: max. 3,300 kg 

Support foot (Fig. 1) 


Adapter Weiste triangle Cat. II 




Fig. 1 Fig. 2 

72 

TDD – Bale Transport Spike Double 

For transporting two unwrapped round bales (max. bale 

diameter 63”) or square bales at the same time 



Reinforced tines | Ø: 1.5”, length: 43” 

Tine protection for road transport 


Payload: max. 5,500 lbs 

Support foot (Fig. 1) 

Square bale attachment (Fig. 2) 





Freight costs net

Fig. 1 

BTGME – Round Bale Transport Fork 

mechanical 

For transporting wrapped or unwrapped round bales. 


Large fork pipes / Ø: 4.3” 

Quick-release fastener for width adjustment 

For bale diameters of 39” – 72” 


Bale weight: max. 3,300 lbs 

Hydraulic width adjustment (Fig. 1) 

Double-acting hydraulic control device required 

Kit for conversion to bale transport spike double (Fig. 2) 

For transporting two unwrapped round bales (max. bale 

diameter 63”) or square bales at the same time / reinforced 

tines (Ø: 1.5”, length 43”) 







Fig. 2 

Fig. 2 

73


BTGHA – Round Bale Transport Fork 

For transporting and tipping wrapped or unwrapped 

round bales 


Large fork pipes / Ø: 4.3” 

Mechanically adjustable fork pipes with quick-release 

fastener 

Two hydraulic cylinders for unlocking the fork pipes 

For bale diameters of 39” - 72” 

Max. operating pressure: 200 bar 



Single-acting hydraulic control device required 

Hydraulic width adjustment 







DTR – Double Transport Frame 

For attaching two BTGME or BTGHA round bale transport 

forks in order to transport two bales at once with a 

diameter of up to 63”. 

Base frame with Cat. II three-point linkage 

Hydraulically movable transport carriage 

WITHOUT BTGME/BTGHA bale transport forks 


Weight (without transport fork): 480 lbs 








74

BTGHY – Round Bale Transport Fork 

hydraulic 

For transporting and stacking round bales 


Ball bearing mounted, rotatable fork pipes 

Hydraulic cylinder for width adjustment 

Support foot 

For bale diameters of 36” - 72” 





Pressure relief valve including check valve 

(telescopic / wheel loaders require an operating pressure 

greater than 200 bar) 

Kit for conversion to bale transport spike 

Tine design same as for bale transport spike single 

Possible attachments (without installation): up to model year 2013 


Hauer B 

Manitou, JCB Q-Fit, JCB Compact Tool Carrier, 

Weidemann hydraulic 


Possible attachments (without installation): starting with model year 2013 


Hauer B, Merlo, SMS, MX 

Dieci/New Holland, Dieci Dedalus, Amkodor, Manitou, JCB 

Q-Fit, JCB Compact Tool Carrier, Weidemann hydraulic, 

Kramer, Schäffer up to 3550, Schäffer from 3550T, Atlas, 

Claas Scorpion, Zettelmeyer 402, Volvo BM, Hydrema, 

Faucheux, Bobcat, CAT 907H / Liebherr L507, 

CAT TH 407 C, Giant, Skid Steer, 

Fendt Cargo T955/Sennebogen 





75


RBG – Round Bale Grabber 

For loading and stacking bales of any kind 

(silage, hay, and straw) 

Base frame with Euro-attachment 

Large, rounded gripper arms with swivel compensator 

Hydraulic cylinder for bale securing 

Bale diameters of 43” - 63” 





Small bale adapter 

For transporting smaller bales (Ø of 36” – 55”) 

RBG 140 – Round Bale Grabber 

RBG option for bale diameters of 32” - 55” 


For transporting smaller bales (Ø of 28” - 47”) 



(telescopic & wheel loaders require an operating pressure 



Cat. I and Cat. II three-point linkage 

Hauer B, Merlo, Merlo ZM3, SMS, MX 

Dieci/New Holland, Dieci Dedalus, Amkodor, Manitou, JCB 

Q-Fit, JCB Compact Tool Carrier, Weidemann hydraulic, 

Kramer, Schäffer up to 3550, Schäffer from 3550T, Atlas, 

Claas Scorpion, Zettelmeyer 402, Zettelmeyer 602, 

Volvo BM, CAT 907H / Liebherr L507, Liebherr L514, Faresin, 

Avant, Faucheux, Bobcat, CAT TH 407 C, Giant, Skid Steer, 



Requires three-point linkage 




76

BTGQU – Square Bale Grabber 

For transporting / stacking round & square bales 

For square bales of up to 84” and round bales of up to 78” 



Large, rounded gripper arms 

Hydraulic cylinder for bale securing 

Low-maintenance gripper arm guides 

Pressure relief valve incl. check valve 





Merlo, MX 

Dieci/New Holland, Manitou, JCB Q-Fit, Weidemann 

hydraulic, Kramer, Schäffer from 3550T, Claas Scorpion, 

Volvo BM, Hydrema, Faucheux, Bobcat, Merlo ZM3 




GFM – Film Storage 

For transporting 16 rolls of film or 14 rolls of film 

and two rolls of net / wide film 


Hydraulic cylinder for lowering the film storage 



Lighting kit 

4 LED work lights and 2 marker lights 

can be controlled via hand-held transmitter 



Merlo ZM3 

Dieci/New Holland, Dieci Dedalus, Kramer, Schäffer 

up to 3550, Schäffer from 3550T, Zettelmeyer 602, 

CAT 907H / Liebherr L507, Bobcat, Faucheux, JCB Q-Fit, 

Weidemann hydraulic, Liebherr L514, Faresin, 

CAT TH 407 C, Giant, Skid Steer 





77


RBS – Round Bale Slicer 

For cutting and transporting bales of any kind (silage, 

hay, and straw), 5 reinforced tines (Ø: 1.5”, length: 39”), 

scraper bar of HARDOX 500, Double-acting hydraulic 

control device required 

Max. opening area: 60” 

Cat. I and Cat. II three-point linkage 

Max. operating pressure: 200 bar, weight: 970 lbs 



(telescopic / wheel loaders require an operating pressure 


Film holder for RBS 

Film / net are separated from the bale without 

the need to climb down from the tractor 

Fixes the net and the film in place across the 

entire width by means of 8 hooks – machines 

made in 2002 or later can be retrofitted with 

the film holder, weight: 115 lbs 

Two additional tines 



Hauer B, Merlo, Merlo ZM3, SMS, MX 

Dieci/New Holland, Dieci Dedalus, Amkodor, Manitou, 

JCB Q-Fit, JCB Compact Tool Carrier, Weidemann 

hydraulic, Kramer, Schäffer up to 3550, Schäffer from 

3550T, Claas Scorpion, Zettelmeyer 602, Volvo BM, 

CAT 907H / Liebherr L507, Faucheux, Bobcat, Atlas, 

CAT TH 407 C, Giant, Skid Steer 





80

RBA – Round Bale Unroller 

BASIC MODEL 

Basic device without three-point linkage 

Scraper floor with curved path-controlled pick-up 

SHORTENED VERSION // The width is reduced by 12” 

BASIC MODEL 

Basic device without three-point linkage 

Scraper floor with curved path-controlled pick-up 


Weight 

1,150 lbs 


Width 6’ 11” 


Bale weight 

TECHNICAL DATA // DEVICE WITH LOADING 

ARM AND STACKER COLLET 

Weight 

1,675 lbs 




up to 2,200 lbs 


1 pressure connection and 1 depressurized return 

81


Figure 1 – Cat. II three-point linkage with stacker collet 

Figure 2 – Hydraulic loading arm 

Figure 3 – Spreader attachment 

Figure 4 – Electric drive 

Figure 5 – Chassis with drawbar 

Figure 6 – Chassis with swivel wheels 


Adapter Weiste triangle Cat. II – Only in combination with three-point attachment 



82

RBA 


Cat. II three-point linkage with stacker collet (Fig. 1) 

Hydraulic loading arm (Fig. 2) 

With 2 load cylinders and 1 telescopic cylinder (loading arm can be reattached on the opposite 

side with a few hand movements). Double-acting hydraulic control device required. 

Spreader attachment (Fig. 3) 

Fixture for evenly spreading straw 

Hydraulic swivel device for spreader attachment 

Quantity control valve for spreader attachment 

Only in combination with quantity control valve RBA 

Quantity control valve RBA 

For adjusting the speed of the scraper floor and of the pick-up 

Electric drive (Fig. 4) 

Composed of 5 hp electric motor with hydraulic pump, return filter and hydraulic oil tank as 

well as control device for scraper floor 

Chassis height-adjustable including drawbar (Fig. 5) 

Drawbar combined with drawbar eye D40 and tractor linkage drawbar; 

Mechanical support for bale pick-up 

Double-acting hydraulic control device required. 

Chassis height-adjustable including swivel wheels (Fig. 6) 

Double steering wheels (for operation in conjunction with smaller tractors), 

only in conjunction with three-point linkage, top link bolt must be attached with 

a chain, not suitable for articulated steering tractors! 

Double-acting hydraulic control device required. 

Feed chute 

Hand control slide valve 2 functions 



Radio remote control 2 sections 

Solenoid valve, radio remote control for the load arm and scraper floor functions. 

Radio remote control with joystick, 3 sections 

Solenoid valve, radio remote control for the load arm, chassis, and scraper floor functions. 

1 pressure connection and 1 depressurized return required 



83


RADIO REMOTE CONTROL 


2 sections 

Radio remote control with joystick 

3 sections 


• The control unit is mounted on the basic device. 

• Only the operating unit with radio control is in the tractor 

No longer the control together with device hoses 

• For operation with a wheel loader or telescopic loader, 

a single-acting control unit with free return, as well as 

a 12-volt connection are required 

• With the radio remote control you can also operate 

the round bale pulper outside of the tractor 

(e.g. when removing film and net) 

• Can be retrofitted on existing round bale pulpers 

HAND CONTROL SLIDE VALVE 

Control device on the round bale pulper 

For operation from the tractor cab 

Depending on equipment 2, 3, and 4 times 

1 x notch for scraper floor 

84


GHU 06 MINI 

BASIC MODEL 

From 8 – 20 kW (~ 10 – 25 HP) // payload up to 1,500 lbs 

Double-acting 2-stage telescopic cylinder, upright in three-point frame 

Three-point linkage Cat. 0 / Cat. I 

Flat bucket bottom with welded-on scraper bar made from HARDOX 500 

Removable swing gate 

STANDARD SIZES 

Bucket depth: 24” I Front / side wall height: 14” 

Model Bucket width Weight 

GHU 06/920 40” 270 lbs 

GHU 06/1200 48” 286 lbs 

GHU 06/1400 55” 300 lbs 

86


Swivel device 

Straightforward installation, can be fitted and removed with 

ease and without the use of tools, increases the height of the front 

panel by 12”, can still be used as a bucket extension 


Adapter Weiste triangle Cat. 0 Communal 





87


GHU 08 

BASIC MODEL 

10 – 45 kW (~ 15 – 60 HP) // payload up to 5,300 lbs 

Single or double-acting 2-stage telescopic cylinder, upright in three-point frame 

Three-point linkage Cat. I 

Torsion spring for quick lowering into end position including automatic end position 

locking in single-acting version 






GHU 08/1200 48” 520 lbs 

GHU 08/1400 55” 545 lbs 

GHU 08/1550 61” 562 lbs 

GHU 08/1700 67” 580 lbs 

GHU 08/1850 72” 600 lbs 

GHU 08/2000 78” 615 lbs 

GHU 08/2200 86” 640 lbs 

88


Swivel device 

Straightforward installation (can be fitted and removed with ease 

and without the use of tools), increases the height of the front 


Sidewall extension 

Consisting of 2 side panels, front panel and one holder 

for the swing gate 

Additional height of 14” 

Additional swing gate 

Bucket width: 48” mm - 72” 

Bucket width: 78”, 86” 

Connecting strips 

For connecting the additional rear panel with standard 

rear panel 

Plug stanchions (1 pair) 

Height: 20” 

Simple installation (can be slipped on or removed without 

the use of tools) 


Hauer B 


Euro attachment including Cat. II attachment 

Straightforward installation thanks to bolted attachment 

three-point attachment remains fully usable 

2-stage locking lugs effect an improved tilt angle, allowing 

for picking up larger amounts of bulk solids 

Weidemann hydraulic, Skid Steer 

Adapter Weiste triangle Cat. 0 Communal, 


Hauer B 





89


GHU 10 

BASIC MODEL 


Single or double-acting 2-stage telescopic cylinder, upright in three-point frame 

Three-point linkage Cat. I and Cat. II 

Torsion spring for quick lowering into end position 

including automatic end position locking in single-acting version 






GHU 10/1400 55” 700 lbs 

GHU 10/1700 67” 735 lbs 

GHU 10/1850 72” 750 lbs 

GHU 10/2000 78” 850 lbs 

GHU 10/2200 86” 875 lbs 

90


Swivel device 


and without the use of tools), increases the height of the front panel 

by 18”, can still be used as a bucket extension 






Bucket width: 55”, 67”, 72” 



For connecting the additional swing gate with standard swing gate 


Height: 20” 



Hauer B 


Euro attachment 





Weidemann hydraulic, Skid Steer 

Weiste triangle Cat. II 

Hauer B 





91


GHU 12 

BASIC MODEL 

Starting at 60 kW (~ 80 HP) // payload up to 11,000 lbs 


Three-point linkage Cat. II and Cat. III 






GHU 12/2000 78” 1,160 lbs 

GHU 12/2200 86” 1,200 lbs 

GHU 12/2350 92” 1,235 lbs 

GHU 12/2500 98” 1,250 lbs 

92


Swivel device 


and without the use of tools), increases the height of the front panel 

by 18”, can still be used as a bucket extension 











Height: 20” 



Hauer B 







Weidemann hydraulic, Manitou, Kramer, CAT 907H / Liebherr L507, 

Liebherr L514 

Weiste triangle Cat. II 

Hauer B 





93


GHS 10 

FOR FORKLIFTS 

BASIC MODEL 


Double-acting 2-stage telescopic cylinder 



Stacker attachment via fork tines 




GHS 10/1400 55” 600 lbs 

GHS 10/1700 67” 645 lbs 

GHS 10/1850 72” 665 lbs 

GHS 10/2000 78” 760 lbs 

GHS 10/2200 86” 790 lbs 

(2.5“) 

65 mm 

150 mm 

(6“) 

94


Swivel device 









Bucket width: 55”, 67”, 72” 





Height: 20” 





NOTICE: The delivery time for GHS is up to 8 weeks. 

95


GHS 12 

FOR FORKLIFTS 

BASIC MODEL 

starting at 60 kW (~ 80 HP) // payload up to 11,000 lbs 

Double-acting 3-stage telescopic cylinder 



Stacker attachment via fork tines 




GHS 12/2000 78” 1,015 lbs 

GHS 12/2200 86” 1,060 lbs 

GHS 12/2350 92” 1,090 lbs 

GHS 12/2500 98” 1,110 lbs 

(2.5“) 

65 mm 

150 mm 

(6“) 

96


Swivel device 














Height: 20” 





NOTICE: The delivery time for GHS is up to 8 weeks. 

97


GHK 

BASIC MODEL 

starting at 75 kW (~ 100 HP) // payload up to 15,000 lbs 


three-point attachment Cat. II and Cat. III 

Flat bucket bottom with bolted scraper bar made from HARDOX 500 





GHK/2200 86” 1,400 lbs 

GHK/2500 98” 1,4710 lbs 

98


Swivel device 









Bucket width: 86” 

Bucket width: 98” 




Height: 20” 

Simple installation (can be slipped on or removed without the use 

of tools) 





2-stage locking lugs effect an improved tilt angle, allowing for 

picking up larger amounts of bulk solids 

Weidemann hydraulic, Manitou, Kramer, CAT 907H / Liebherr L507, 

Liebherr L514 

Adapter Weiste triangle, Cat. II 

Hauer B adapter 





99

MS 100 

BLADE SHARPENER 

BASIC MODEL 

Basic model with mobile base frame 

1.5 hp electric motor – available with 230 V, 400 V (50 Hz) or 120 V (60 Hz) 

Please specify when ordering (plug not included) 

Special cup with coarse grain size 

TECHNICAL DATA 

L x W x H 36.5” x 26.5” x 57” 

Weight 


Replacement cup wheel 

Cup wheel: coarse grain size (included with the scope of delivery) 

Cup wheel: fine grain size, for increased service life 

Linear grinding unit 

Adapter for sharpening straight blades 

Cooling unit 

Prevents the blade from heating up while being sharpened 



152 lbs 

102

EXHIBITION STANDS 

TECHNICAL DATA (specifications without transport devices, high lift buckets or G1015) 

BASIC MODEL (price does not include equipment) 

Exhibition stand for 4 attachments (transport devices and high lift buckets) 

or 1 attachment (wrapper G1015) 

Eyes for transport 

Transport devices, high lift buckets 

Weight 750 lbs 550 lbs 

Length 8’ 1” 7’ 5” 

Width 3’ 1” 4’ 10” 

Height 9’ 4’ 2” 

G1015 

Holder for mounting a flagpole with a diameter of 3.5” 

net price, without discount 

Exhibition stand for transport devices 

Exhibition stand for G1015 

Exhibition stand for high lift buckets 

103

DRAWBAR EYE TYPES 

A K80 drawbar eye 

Ball coupling 

B Standard drawbar eye D40 mm 

Acc. to DIN 11026, ISO 5692-2 

C Ring drawbar eye D50 mm 

Rotatable (hitch ring) 

DIN similar to 9678, ISO similar to 5692-1 

D Ring drawbar eye D50 mm 

Rigid (hitch ring) 

DIN similar to 9678, ISO similar to 20019 

E Standard drawbar eye D50 mm 

Truck drawbar eye 


F Standard drawbar eye D40 mm, moved downward 

42 mm thick 


F Standard drawbar eye D40 mm, moved downward for G-1 

42 mm thick 


G Standard drawbar eye D40 mm 

Truck drawbar eye 

30 mm thick 


H USA drawbar eye D33 mm 

Rigid 

104

TIRES 

Complete wheel 300/80-15.3 

10PR/6 hole / ET0 / Diagonal, AW 

Complete wheel 380/55-17 

10PR/6 hole / ET0 / Diagonal, AW 

Complete wheel 480/45-17 

10PR/6 hole / ET-35 / Diagonal, AW 

Complete wheel 500/60-R22.5 

155D/8 hole/ET+50 BKT/Radial, FL630 Plus 

Complete wheel 520/50-R17 

147D/6 hole / ET-35 / Radial, Vredestein Flotation Trac 


152D/8 hole / ET0 Radial, Vredestein Flotation Trac 


159D/8 hole / ET0 Radial, Vredestein Flotation Trac 


156D/8 hole / ET-35 Radial Vredestein Flotation Trac 


161D/8 hole / ET-50 Radial Vredestein Flotation Trac 


157D/8 hole / ET-65 Radial, Nokian Country King 

105

ATTACHMENTS 

Volvo BM 

Faucheux 

Avant 

Manitou 


Hauer B 

Faresin 

SMS 

Please check whether the attachment is available for your desired product. 

106

Dieci/New Holland 

Dieci Dedalus 

JCB Q-Fit 

CAT 907 H & Liebherr L507 

JCB Compact Tool Carrier 

Hydrema 

Kramer 

Merlo ZM3 

Merlo 

107


Atlas 

MX 

Liebherr L514 

Amkodor 

Weidemann, hydraulic 

Zettelmeyer 602 

Claas Scorpion 

Zettelmeyer 402 

Please check whether the attachment is available for your desired product. 

108

Adapter Weiste triangle Cat. O Communal 


CAT TH 407 C 

Bobcat 

Schäffer up to 3550 

Schäffer from 3550T 

Giant 

Skid Steer 

109



110 

Please check whether the attachment is available for your desired product.

111

TERMS AND CONDITIONS 

Excerpt from the Terms and Conditions (available at https://www.goeweil.com/en/terms-and-conditions/ 

Terms of sale and delivery 

• Sale and delivery will only be performed in accordance with the general terms of delivery applicable to agricultural 

machinery and vehicles. 

• Our liability only applies to the use of original parts and is voided by any modifications or repairs performed on 

the delivery item by the purchaser or a third party without our prior written approval. 

• Claims can only be accepted if filed within the first 8 days. 

• In warranty cases, the manufacturer must be notified in writing before any repairs are made. 

Terms of payment – default interest 

• As a basic principle, we will only accept such terms of payments as have been granted by us or are specified on the 

invoice. Banking default interest plus cost and expenses will be charged from the day of maturity. 

• The goods will remain our property until payment has been received in full. 

Goods on consignment 

• The purchaser is liable for any loss or damage of goods stored by the purchaser as well as for any consequences 

resulting from improper storage. 

• The manufacturer must be notified immediately in case the goods are sold! Any commissioning or transfer (lending) 

is subject to the manufacturer's approval. 

Place of performance and jurisdiction 

• The place of performance and jurisdiction for the delivery, payment, and all other mutual obligations is A-4020 Linz. 

• The legal relationships are governed by the laws of Austria. 

112

NOTES 

113

114

115

116

117

118

119

Art. no. 86,01034H 86,01033I / ENGLISH US 

GÖWEIL Maschinenbau GmbH 

Davidschlag 11 / 4202 Kirchschlag / Austria 

Tel: +43 (0)7215 2131-0 / Fax: +43 (0)7215 2131-9 

office@goeweil.com / www.goeweil.com

EN-US | Product Range | Goeweil

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?