Glass Adjustable Partitions MilTech - catalogue EN

Technical description of partitions
Partition wall systems MILT (selected)
Convertible interior partition walls MilTech
Structure: The partition is made of visible aluminum profiles,
internal concealed thin-walled steel profiles, solid and full
glass fillings.
Inter-pane louvers: Horizontal, wheel-controlled, cord (bed
chain), electrically controlled, possibility of the remote central
control, wand + stringline.
Connection of two solid
modules by vertical aluminum
profile width 35 mm
– system MilTech
Connection of two glass
modules with vertical aluminum
profile width 35 mm
– system MilTech
Aluminum profiles: Natural anodized finish or RAL, metallic
paints Tiger.
Solid fillings: plasterboard or fermacell boards with adhesive
laminated vinyl foil Durafort® (250 colours), laminate boards
(pastel colours and woody plant decoration), veneered
boards, metallic surfaces with the internal sound insulation.
Full glass fillings: Clear pane-glass set or single glass unit.
The possibility of sandblasted fillings, matte or colour foil coating,
glass with electroluminescent white or colour diodes.
Fittings: On client’s request, divided stainless steel rosette
fitting HOLAR, handle-handle, as the standard.
Lock: HOBES lock as the standard, or electromechanical
lock Abloy or electrical door opener Befo as required by the
client.
Partition fixing: partitions are anchored between the floor
and lowered coffered or plasterboard ceiling (and/or directly
in the ceiling structure) - see CAD details on the previous
page.
Connection of two solid
modules (without profiles)
– system MilTech
Connection of solid
and glass module
– system MilTech
Connection of two glass
modules (without vertical
aluminum column)
– system MiltDesign
Connection of glass
module with door module
– system MilTech
Door: Single-wing or double-wing door, openable (with the
head-door panel), sliding manually or controlled by a photocell,
swinging. Standardized production, atypical also
available.
Modules: Wall: standard solid and full glass modules, widths
600, 1,000, 1,200 mm; up to 1,500 mm may be requested,
for glass walls with horizontal division up to 3,000 mm.
On client’s request. Door modules: axial width of the module
930 mm (800 mm clear width) for single-wing doors; axial
width of the module 1,750 mm (1,600 mm clear width)
for double-wing doors.
Module connection: Modules are connected by a concealed
vertical thin-walled profile V-Beam and visible vertical
aluminum profile width 35 mm. To reinforce the solid module
internal structure, vertical V-Beams are completed with
the internal concealed H-Beams.
Spread of sound throughout
secondary routes
• Where higher demands are placed on sound
insulation, a sound crosstalk (vertical barrier) must
be installed at the interface between the contact
of the partition, suspended ceilings, and double
floors to eliminate sound transmission throughout
secondary routes - see the previous page.
Technical details (CAD)
• Documents showing standardized designs
and details are available upon request from our
technical library.
Corner of partitions
– connection of solid
and glass module
– system MilTech
Standards, Optimum wall design
Connection of two solid
modules - wall with higher
sound insulation R w = 48 dB
– system MilTech
Corner of partitions
– connection of two glass
walls – system MilTech
or MiltDesign
Switches on the partitions
Next to the door, a solid module, width 100–180 mm, to mount switches, sockets,
and air-conditioning control panel
The switch is mounted on the
aluminum column next to the
door frame
Minimum required sound insulation of dividing wall structures in the buildings:
• standard office spaces and work rooms with technical activities R´w=37 dB
• meeting rooms, classrooms, management offices, lecture rooms R´w= 47 dB
Where higher demands are placed on sound insulation, a sound crosstalk (vertical barrier) must be installed
at the interface between the contact of the partition, suspended ceilings, and double floors to eliminate sound
transmission throughout secondary routes.
Parameters of convertible partition walls
solid partitions
glass partitions
Module width 100–1200 mm 100–1200 mm (up to 2500 mm)
Partition wall height < 4500 mm (up to 7000 mm) < 4500 mm (up to 6000 mm)
Partition wall thickness
100 mm
Sound insulation R w (dB) 44 dB, 46 dB, 48 dB (up to 56 dB *) 42 dB, 45 dB **
Vertical connection of modules with visible aluminum profile Yes Yes
Vertical connection between modules without
aluminum column
possible possible ***
* partitions thickness 170–250 mm; ** depending on the type of used glass; *** technical solution upon request
22 | 23