MagFil Datasheet
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MAGFIL-300EX filtration unit is the world’s first mobile ATEX<br />
certified self-cleaning magnetic filtration unit, designed for on-site<br />
filtration for the oil and petrochemical industries in both up, mid &<br />
downstream production and storage terminals.<br />
With a maximum capacity of 350 m³/hr and a patented ‘’PREMAG’’ treatment, this stainless-steel ATEX<br />
magnetic unit is designed to effectively remove ferrous particulate contamination to sub-micron level, including<br />
black powder.<br />
(Black powder is the industry name for the abrasive particulates present in all gas and hydrocarbon fluid<br />
transmission lines due to corrosion and erosion of pipeline walls)<br />
Filtration using the MAGFIL-300EX filtration unit is a cleanable, reusable technology that offers a sustainable<br />
alternative to disposable cartridge/bag media filtration.<br />
Magnetic filtration technology can remove contamination to sub-micron level with minimal flow restriction,<br />
maximizing efficiency and avoiding pressure drop.<br />
With both “PREMAG” and 19 pieces of strong neodymium magnets combined, the MAGFIL-300EX filtration unit<br />
is powerful enough to filter both ferrous and (some) non-ferrous contamination to sub-micron level.<br />
Filtration is also possible in the suction side, avoiding contaminated product entering rotating equipment like<br />
pumps and compressors.<br />
The MAGFIL-300EX is equipped with an on-board industrial PLC for stand-alone operations. Depending on the<br />
rate of pollution the MAGFIL-300EX is automatically drained and rinsed at a configurable frequency using a fully<br />
integrated spray cleaning system.<br />
In the matrix of contaminant filtered out, numerous non-magnetic particles like Sulphur, Aluminum and Silicon<br />
can be found.<br />
For more information please feel free to contact us at info@magfil.com or + 31 (0)181- 760062<br />
DATA<br />
SHEET<br />
Type : MAGFIL-300EX - 20ft container skid<br />
Ex classification : II 3G IIB Ex h T3<br />
Nominal capacity : 300 m³/hr<br />
Maximal capacity : 350 m³/hr<br />
Induced magn. flux density : 1.28 Tesla (12800 Gauss)<br />
Effective magn. flux density : 0.6 Tesla (6000 Gauss)<br />
Maximum load FE (dry weight) : 54 kg<br />
Volume : 0.140 m³ including PREMAG<br />
Drained Volume :<br />
• Single drain = 210 litre<br />
• Double drain = 40 litre<br />
Weight unit : 2.400 kg | including 200 kg mounting frame<br />
Weight 20ft container : 3.300 kg<br />
Total weight : 5.700 kg<br />
Material : • Filter housing and pipe work = Stainless steel 304<br />
► 2006/42/EC<br />
► 2014/68/EU<br />
► 2014/34/EU<br />
► 2014/30/EU<br />
► NEN-EN 13445-1:2014 (issue 5:2018)<br />
► EN-ISO 13850:2015<br />
► EN-IEC 60204-1:2018<br />
► EN-ISO 13857:2008<br />
Power Supply : 3 phases 400 VAC / 50 Hz<br />
Consumption : 13.5 kW<br />
Current : 6 kA<br />
Design pressure : 10 bar<br />
Test pressure : 14 bar<br />
Design standard : EN 13445 / Module A<br />
Design temperature : 60°C (140°F)<br />
Dimensions : L 6058 cm | W 2438 cm | H 2896 cm<br />
Jointing : Compressed asbestos-free jointing based upon glass<br />
and aramid fibres with a nitrile rubber binder - 550x457x2 mm.<br />
Finish UNIT :<br />
• Filter housing, pipe work, pallet = Ceramic shot blasted<br />
• Magnetic elements = Corrosion- & wear resistant treatment<br />
• Hydraulics & spray pump = Paint coated<br />
• Tubes to insert magnetic elements = Stainless steel 316Ti<br />
Machinery Directive<br />
Pressure Equipment Directive (PED)<br />
ATEX Product Directive<br />
Directive Electromagnetic Compatibility (EMC)<br />
Safety of Machinery - General principles for design<br />
Safety of Machinery - Emergency stop function<br />
Safety of Machinery - Electrical Equipment of Machines<br />
Safety of Machinery - Safety distances<br />
► EN-IEC 60079-14:2014 + C1:2016 Explosive atmospheres - Part 14<br />
► EN-ISO 80079-36:2016 Explosive atmospheres - Part 36<br />
► EN-ISO 80079-37:2016 Explosive atmospheres - Part 37<br />
The object of the declaration described above is in conformity with the relevant Union<br />
harmonization legislation.<br />
This datasheet is issued under the sole responsibility of <strong>MagFil</strong> B.V.<br />
<strong>MagFil</strong><br />
Excellence in Magnetic Filtration