CPT International 02/2021

PREVIEW/IMPRINT
The KMA Ultravent system enables
effective heat recovery and utilization.
Photo: KMA
Preview of the next issue
Selection oftopics:
L. Arenz: Best practice: High-performance heat recovery
Pressure die casting foundry Stihl Magnesium Druckguss saves 85 % CO 2
compared to conventional hall heating with aheat
recovery system of KMA Umwelttechnik GmbH, Königswinter, Germany.
P. Sonntag: Aring for eternity
Rings are often casings. To solve ajewelry manufacturer’s casting problems, the gating for the ring was to be optimized.
For this purpose, four different gating designs were analyzed with Magmasoft autonomous engineering.
J. Vogt et al.: Slurry-based Additive Manufacturing of Casting Cores
Additive Manufacturing (AM) allows for the production of complex casting cores e.g. made from sand. Especially the Binder
Jetting technique enables aproduction in an efficient way.
Imprint
Publisher:
German Foundry Association
Editor in Chief:
Martin Vogt, Dipl.-Journalist
Deputy Editor in Chief:
Robert Piterek, M.A.
P.O. Box 10 51 44
40042 Düsseldorf, Germany
Telephone: +49 211 6871-358
Telefax: +49 211 6871-365
E-mail: redaktion@bdguss.de
Published by:
DVS Media GmbH
Aachener Straße 172
40223 Düsseldorf, Germany
Telephone: +49 211 1591-0
Telefax: +49 211 1591-150
E-Mail: media@dvs-media.info
Managing Director:
Dirk Sieben
Advertising Manager:
Markus Winterhalter
Art Director:
Dietmar Brandenburg
Circulation:
DVS Media GmbH, Reader Service
Telephone: +49 6123 9238-242
E-Mail: dvsmedia@vuservice.de
Annual subscription rate (incl. postage)
Home: €110,– incl. 7% VAT; Member States
in the EC: Subscribers with VAT-No. and
Third Countries: €110,–; Subscribers without
VAT-No.: €110,– plus 7% VAT;
Single copy €33,–.
Minimum subscription period 12 months.
Termination ofsubscriptions can only be made
from 31st December and notice of
termination must be received by the
Publishers by 15th November.
Otherwise, the subscription is automatically
renewed and payable for afurther
12 months.
Advertising rate card No. 29 from 1.1.2020
Publication: Quarterly
©2021 DVS Media GmbH ·Düsseldorf
Printed by:
Druck: D+L Printpartner GmbH
Schlavenhorst 10
46395 Bocholt, Printed in Germany
Printed on paper bleached totally chlorine-free
All rights, including those of translation into
foreign languages and storage in data banks,
reserved.
Photomechanical reproduction (photocopy,
microcopy) of this technical publication or
parts of it isnot allowed without special
permission.
The reproduction in this journal of registered
trademarks does not warrant the assumption,
even without any special marking, that such
names are tobeconsidered free under the
trade-mark law and may be used by anyone.
Certification of circulation by the German
Audit Bureau of Circulation
ISSN 0935-7262